A new correlation for water saturation calculation in gas shale reservoirs based on compensation of kerogen-clay conductivity

Determination of water saturation in gas shale reservoirs is a very challenging issue due to the incomplete understanding of the non-Archie components. Kerogen and clay content are the two main factors controlling the conductivity of gas shales and resistivity log responses. The presence of clays as conductive materials causes excessive conductivity for the rock that result in an overestimation of water saturation calculation. On the other hand, the presence of solid kerogen has an opposite effect to clays and causes reduction of rock conductivity and thus underestimation of water saturation. In this research, attempts have been made to develop an effective equation for water saturation determination in gas shale reservoirs based on compensation of kerogen and shale conductivities. The new equation is able to handle both high and low conductivity components. The proposed approach makes one step ahead towards reducing uncertainty in the petrophysical evaluation of gas shale reservoirs. Being independent of formation water resistivity and Archie parameters are of the important and effective aspects of the introduced equation in water saturation calculation of gas shale reservoirs. Finally, the kerogen-clay compensation equation has successfully been applied to the determination of water saturation in the Goldwyer shale formation, Canning basin, Western Australia. Crown Copyright (C) 2016 Published by Elsevier B.V. All rights reserved.