相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Coupling effect of strain rate and temperature on tensile damage mechanism of polyphenylene sulfide reinforced by glass fiber (PPS/GF30)
Mohammadali Shirinbayan et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)
Preparation, compression behavior and 3D damage evolution of epoxy syntactic foam with nickel hollow spheres
Ruoxuan Huang et al.
COMPOSITES COMMUNICATIONS (2022)
Tensile and shear behavior of plain weave fabric carbon fiber reinforced polymer at elevated temperatures
Claudia Barile et al.
POLYMER COMPOSITES (2022)
Effects of temperature and fiber orientation on the tensile behavior of short carbon fiber reinforcedPEEKcomposites
Baoning Chang et al.
POLYMER COMPOSITES (2021)
In situ observation of the deformation and fracture of an alumina-alumina ceramic-matrix composite at elevated temperature using x-ray computed tomography
Talha J. Pirzada et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Influence of void content and morphology on the creep behavior on glass/ epoxy composites
Fillip Cortat Alves et al.
COMPOSITES COMMUNICATIONS (2021)
Mechanical properties and failure mechanism of 3D needle-punched Cf/SiC-Al composites
Yuanhao Li et al.
CERAMICS INTERNATIONAL (2021)
Assessing the thermal safety of solid propellant charges based on slow cook-off tests and numerical simulations
Yongfeng Kou et al.
COMBUSTION AND FLAME (2021)
Heat-treatment effects on dimensional stability and mechanical properties of 3D printed continuous carbon fiber-reinforced composites
Kui Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
A review on the tensile behavior of fiber-reinforced polymer composites under varying strain rates and temperatures
Azzam Ahmed et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
A Modified Iosipescu Method to Study In-Plane Shear Strength of C/SiC Composites at Elevated Temperatures in Air
Z. L. Qu et al.
EXPERIMENTAL MECHANICS (2021)
Multi-mode ultrasonic visualization of porosity in composites using a focused transducer with high sensitivity and near-surface resolution
Junwei Shi et al.
COMPOSITES PART C: OPEN ACCESS (2021)
Compressive and flexural behavior of carbon fiber-reinforced PPS composites at elevated temperature
Shiyu Wang et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2020)
Effect of temperature on the transverse impact performance of preloaded CFRP wire
Yawei Fang et al.
COMPOSITE STRUCTURES (2020)
Effects of strain rate and high temperature environment on the mechanical performance of carbon fiber reinforced thermoplastic composites fabricated by hot press molding
Yiben Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
A virtual fields method for identifying anisotropic elastic constants of fiber reinforced composites using a single tension test: Theory and validation
Chanyang Kim et al.
COMPOSITES PART B-ENGINEERING (2020)
Influence of hierarchical porosity on the mechanical properties of porous woven composites under thermomechanical loading
Zhengmao Yang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
In situ characterization of trans-laminar fracture toughness using X-ray Computed Tomography
Xiaoyang Sun et al.
COMPOSITES COMMUNICATIONS (2020)
Detecting damage initiation in short fiber composites via in-situ X-ray tomography and digital volume correlation
Ronald F. Agyei et al.
COMPOSITES COMMUNICATIONS (2020)
Numerical analysis of cook-off behavior of cluster tubular double-based propellant
Qing Ye et al.
APPLIED THERMAL ENGINEERING (2020)
In situ observation of compression damage in a 3D needled-punched carbon fiber-silicon carbide ceramic matrix composite
Fan Wan et al.
COMPOSITE STRUCTURES (2019)
Hygrothermal aging and structural damage of a jute/poly (lactic acid) (PLA) composite observed by X-ray tomography
Ning Jiang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Dynamic deformation and failure process of quasi-closed-cell aluminum foam manufactured by direct foaming technique
Ruoxuan Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites
Swaroop G. Nagaraja et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
Numerical simulation for strain rate and temperature dependence of transverse tensile failure of unidirectional carbon fiber-reinforced plastics
Mio Sato et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Structure and flexural properties of 3D needled carbon fiber reinforced carbon and silicon carbide (C/C-SiC) composites fabricated by gaseous and liquid silicon infiltration
Fan Wan et al.
CERAMICS INTERNATIONAL (2019)
Three-dimensional porosity characterization in carbon/glass fiber epoxy hybrid composites
Francisco Maciel Monticeli et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
The Effect of Temperature and Strain Rate on the Interfacial Behavior of Glass Fiber Reinforced Polypropylene Composites: A Molecular Dynamics Study
Muhan Zhang et al.
POLYMERS (2019)
Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation
Fan Wan et al.
CERAMICS INTERNATIONAL (2019)
High residual mechanical properties at elevated temperatures of carbon fiber/acetylene-functional benzoxazine composite
Bao-Gang Sun et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
An experimental investigation of the temperature effect on the mechanics of carbon fiber reinforced polymer composites
Zian Jia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Development and validation of an anisotropic damage constitutive model for C/SiC composite
Qiang Yang et al.
CERAMICS INTERNATIONAL (2018)
Thermal ageing effects on mechanical properties and barely visible impact damage behavior of a carbon fiber reinforced bismaleimide composite
Wang Shaoquan et al.
MATERIALS & DESIGN (2017)
Influence of high temperature on the flexural properties of GF/pCBT laminates and their fusion-bonded joints
Lu Zhang et al.
COMPOSITES PART B-ENGINEERING (2017)
Evaluation of porosity effects on the mechanical properties of carbon fiber-reinforced plastic unidirectional laminates by X-ray computed tomography and mechanical testing
A. G. Stamopoulos et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Mechanical properties and failure characteristics of CFRP under intermediate strain rates and varying temperatures
Yunfu Ou et al.
COMPOSITES PART B-ENGINEERING (2016)
In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite
L. Saucedo-Mora et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Mechanical Characterization of the Tensile Properties of Glass Fiber and Its Reinforced Polymer (GFRP) Composite under Varying Strain Rates and Temperatures
Yunfu Ou et al.
POLYMERS (2016)
Effect of porosity and carbon composition on pore microstructure of magnesium/carbon nanotube composite foams
Qizhen Li
MATERIALS & DESIGN (2016)
Influence of service temperature and strain rate on the bond performance of CFRP reinforcement in concrete
Adorjan Borosnyoi
COMPOSITE STRUCTURES (2015)
Influence of voids on the compressive failure behaviour of fibre-reinforced composites
Wilfried V. Liebig et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Temperature effect on the mechanical properties of carbon, glass and carbon-glass FRP laminates
Rami A. Hawileh et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Effect of temperature on strength and stiffness properties of near-surface mounted FRP reinforcement
Baolin Yu et al.
COMPOSITES PART B-ENGINEERING (2014)
Tensile behavior of glass/epoxy laminates at varying strain rates and temperatures
J. M. L. Reis et al.
COMPOSITES PART B-ENGINEERING (2012)
Time-temperature dependence of thermomechanical recovery of cold-curing structural adhesives
Omar Moussa et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures
Ke Wang et al.
ENGINEERING STRUCTURES (2011)
In-plane shear strength of a carbon/carbon composite at different loading rates and temperatures
K. F. Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Comparison of X-ray micro-tomography measurements of densities and porosity principally to values measured by mercury porosimetry for carbon-carbon composites
E. Weber et al.
CARBON (2010)
Time and temperature dependence of carbon/epoxy interface strength
Jun Koyanagi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Tensile Properties of CFRP and Hybrid FRP Composites at Elevated Temperatures
Shenghu Cao et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Effects of void geometry on elastic properties of unidirectional fiber reinforced composites
H Huang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Physical and mechanical properties of unidirectional plant fibre composites - an evaluation of the influence of porosity
B Madsen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
The effects of temperature and strain rate on the properties of carbon-fiber-reinforced 7075 aluminum alloy metal-matrix composite
WS Lee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)