4.8 Article

Overpotential decomposition enabled decoupling of complex kinetic processes in battery electrodes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Enhanced homogeneity of electrochemical reaction via low tortuosity enabling high-voltage nickel-rich layered oxide thick-electrode

Shuping Li et al.

Summary: In this study, a low-tortuosity thick electrode was constructed using the ice-templating strategy, and its effect on electrochemical performance was investigated. The results showed that the low-tortuosity electrode exhibited reduced concentration polarization and fast ion transport kinetics, resulting in superior rate capability. Additionally, the low-tortuosity electrode facilitated homogeneous electrochemical reactions and reduced intragranular stress, leading to improved structural integrity and cyclability.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Multidisciplinary

Design of Scalable, Next-Generation Thick Electrodes: Opportunities and Challenges

Adam M. Boyce et al.

Summary: Current research is allowing for thicker lithium-ion battery electrodes, which can improve energy density and reduce costs, but challenges such as performance issues, manufacturing challenges, and scalability remain. Pore engineering may provide opportunities to design thicker and better electrodes while ensuring long-term performance and scalability.

ACS NANO (2021)

Article Electrochemistry

Theory of coupled ion-electron transfer kinetics

Dimitrios Fraggedakis et al.

Summary: The microscopic theory of chemical reactions is based on transition state theory, where coupled ion-electron transfer is developed to facilitate non-adiabatic electron transfer. The general formula of the reaction rate derived in this theory depends on various factors, including overpotential, solvent properties, electronic structure, and ion chemical potential in the transition state. This theory has been successfully applied to Li-ion batteries and accurately predicts the concentration dependence of reaction rates.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Interplay of Lithium Intercalation and Plating on a Single Graphite Particle

Tao Gao et al.

Summary: Improving safety, increasing charging rates, and extending the lifetime of lithium-ion batteries is a major challenge, with the key being to control lithium plating on graphite anodes. Experimental studies have shown that the onset of plating is strongly coupled with phase separation in graphite, occurring only on the fully lithiated edges of particles. The competition between Li insertion and plating is further elucidated through energetics and kinetics analysis.
Article Chemistry, Physical

Overpotential analysis of graphite-based Li-ion batteries seen from a porous electrode modeling perspective

Zhiqiang Chen et al.

Summary: This study discusses the overpotential of Li-ion batteries and its influence on power and energy densities, introducing a method for decomposing the total overpotential using a P2D model. It shows that the four components of overpotential are strongly influenced by battery parameters and reaction-rate distribution within the porous electrode.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Unveiling low-tortuous effect on electrochemical performance toward ultrathick LiFePO4 electrode with 100 mg cm-2 area loading

Shuping Li et al.

Summary: Thickening electrodes can increase energy density and reduce cost, but the electrochemical performance is limited by lithium-ion transport kinetics. Low-tortuous thick electrodes can accelerate lithium-ions transport, reduce concentration polarization, and possess a stable cathode electrolyte interface, leading to superior cyclability and linear increase in area capacities with active material loadings, even at high area loadings.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Understanding the limitations of lithium ion batteries at high rates

Michael. J. Lain et al.

Summary: Commercial lithium ion cells were disassembled for electrode evaluation, showing three limiting processes during high rate pulse power tests, and specific charge and discharge parameters were identified for different power levels.

JOURNAL OF POWER SOURCES (2021)

Review Chemistry, Physical

Fast Charging of Lithium-Ion Batteries: A Review of Materials Aspects

Manuel Weiss et al.

Summary: Fast charging is essential for the economic success of electric vehicles, with lithium-ion batteries facing limitations due to the transport of lithium ions within the electrodes. Understanding these limitations is crucial for optimizing material properties for fast-charging applications.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Pathways towards managing cost and degradation risk of fast charging cells with electrical and thermal controls

Juhyun Song et al.

Summary: The study shows that by introducing a constant-risk fast charging protocol under moderate allowable risks of degradation, an 80% charging of a typical NMC/graphite cell can be achieved in just 10 minutes at a low cost.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

Microstructural Evolution of Battery Electrodes During Calendering

Xuekun Lu et al.

Review Chemistry, Multidisciplinary

A review on energy chemistry of fast-charging anodes

Wenlong Cai et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Energy & Fuels

Data-driven prediction of battery cycle life before capacity degradation

Kristen A. Severson et al.

NATURE ENERGY (2019)

Article Multidisciplinary Sciences

Quantifying the factors limiting rate performance in battery electrodes

Ruiyuan Tian et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Physical

Thick Electrode Batteries: Principles, Opportunities, and Challenges

Yudi Kuang et al.

ADVANCED ENERGY MATERIALS (2019)

Review Energy & Fuels

Challenges and opportunities towards fast-charging battery materials

Yayuan Liu et al.

NATURE ENERGY (2019)

Article Energy & Fuels

High areal capacity battery electrodes enabled by segregated nanotube networks

Sang-Hoon Park et al.

NATURE ENERGY (2019)

Article Multidisciplinary Sciences

Size-dependent kinetics during non-equilibrium lithiation of nano-sized zinc ferrite

Jing Li et al.

NATURE COMMUNICATIONS (2019)

Article Electrochemistry

Controlling of Dispersion State of Particles in Slurry and Electrochemical Properties of Electrodes

Kentaro Kuratani et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Chemistry, Multidisciplinary

Towards membrane-electrode assembly systems for CO2 reduction: a modeling study

Lien-Chun Weng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

Short-range contacts govern the performance of industry-relevant battery cathodes

Samantha L. Morelly et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

High Lithium Transference Number Electrolytes Containing Tetratriflylpropene's Lithium Salt

J. Popovic et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Article Electrochemistry

On the Fundamental and Practical Aspects of Modeling Complex Electrochemical Kinetics and Transport

Steven C. DeCaluwe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Chemistry, Physical

High Areal Energy Density 3D Lithium-Ion Microbatteries

Janet I. Hur et al.

Review Chemistry, Physical

On state-of-charge determination for lithium-ion batteries

Zhe Li et al.

JOURNAL OF POWER SOURCES (2017)

Article Electrochemistry

Comparing Macroscale and Microscale Simulations of Porous Battery Electrodes

Kenneth Higa et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Review Chemistry, Physical

Promising Routes to a High Li+ Transference Number Electrolyte for Lithium Ion Batteries

Kyle M. Diederichsen et al.

ACS ENERGY LETTERS (2017)

Article Electrochemistry

Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy

Johannes Landesfeind et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Article Chemistry, Physical

Investigation of charge transfer kinetics of Li-Intercalation in LiFePO4

C. Heubner et al.

JOURNAL OF POWER SOURCES (2015)

Article Chemistry, Physical

Quantification of bottlenecks to fast charging of lithium-ion-insertion cells for electric vehicles

Rajeswari Chandrasekaran

JOURNAL OF POWER SOURCES (2014)

Article Multidisciplinary Sciences

Charge transfer kinetics at the solid-solid interface in porous electrodes

Peng Bai et al.

NATURE COMMUNICATIONS (2014)

Review Chemistry, Multidisciplinary

Theory of Chemical Kinetics and Charge Transfer based on Nonequilibrium Thermodynamics

Martin Z. Bazant

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Article Chemistry, Multidisciplinary

Design of Battery Electrodes with Dual-Scale Porosity to Minimize Tortuosity and Maximize Performance

Chang-Jun Bae et al.

ADVANCED MATERIALS (2013)

Article Chemistry, Physical

Mapping spatially inhomogeneous electrochemical reactions in battery electrodes using high energy X-rays

Olaf J. Borkiewicz et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Article Electrochemistry

High Rate Capability of Li(Ni1/3Mn1/3Co1/3)O-2 Electrode for Li-Ion Batteries

Shao-Ling Wu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Article Electrochemistry

Transport properties of LiPF6-based Li-ion battery electrolytes

LO Valoen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)