4.8 Article

Fluorophenyl methyl sulfone as an interface modifier for Ni-rich cathode materials of lithium-ion batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Bifunctional composite separator with redistributor and anion absorber for dendrites-free and fast-charging lithium metal batteries

Mengmeng Wang et al.

Summary: A scalable modification with a PVDF-HFP/Y0.08Zr0.92O2-delta composite coating on commercial polypropylene (PP) separators can achieve dendrites-free high performance Li metal batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Amide compounds as electrolyte additives for improving the performance of high-voltage lithium-ion batteries

Mingzhu Sun et al.

Summary: The addition of DMTFA or DMAA improves the cycling stability of LiNi0.5Co0.2Mn0.3O2 (NCM523)/graphite cells by forming stable films on the electrodes and suppressing electrolyte decomposition. This enhances the battery performance at high voltage.

IONICS (2022)

Article Chemistry, Physical

Malonic-acid-functionalized fullerene enables the interfacial stabilization of Ni-rich cathodes in lithium-ion batteries

Chanhyun Park et al.

Summary: The study investigates the use of a fullerene with malonic acid moieties as an electrolyte additive to address challenges associated with the oxidation of residual lithium compounds, maintaining the stability of the cathode, and mitigating reactions with LiPF6.

JOURNAL OF POWER SOURCES (2022)

Article Engineering, Environmental

3-(Trifluoromethyl)benzoylacetonitrile: A multi-functional safe electrolyte additive for LiNi0.8Co0.1Mn0.1O2 cathode of high voltage lithium-ion battery

Ya-Ping Yang et al.

Summary: In this study, 3-(trifluoromethyl)benzoylacetonitrile (3-TBL) was selected as a flame-retardant additive for high-voltage lithium-ion battery cathode, improving the battery cycle life and safety performance in synergy with lithium difluoro(oxalato)borate.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Article Electrochemistry

A LiPF6-LiFSI Blended-Salt Electrolyte System for Improved Electrochemical Performance of Anode-Free Batteries

Haeyoung Choi et al.

Summary: This study reports a novel dual-salt electrolyte for improving the cycling performance and stability of anode-free Li-metal batteries. The dual-salt electrolyte facilitates uniform Li deposition and stable solid electrolyte interphase, resulting in improved performance and low polarization.

JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY (2022)

Article Chemistry, Physical

Enhanced homogeneity of electrochemical reaction via low tortuosity enabling high-voltage nickel-rich layered oxide thick-electrode

Shuping Li et al.

Summary: In this study, a low-tortuosity thick electrode was constructed using the ice-templating strategy, and its effect on electrochemical performance was investigated. The results showed that the low-tortuosity electrode exhibited reduced concentration polarization and fast ion transport kinetics, resulting in superior rate capability. Additionally, the low-tortuosity electrode facilitated homogeneous electrochemical reactions and reduced intragranular stress, leading to improved structural integrity and cyclability.

ENERGY STORAGE MATERIALS (2022)

Review Electrochemistry

Structure, modification, and commercialization of high nickel ternary material (LiNi0.8Co0.1Mn0.1O2and LiNi0.8Co0.15Al0.05O2) for lithium ion batteries

Jie Liu et al.

Summary: NCM811, a promising cathode material for lithium ion batteries, has gained a huge market with its high energy density and low cost. However, issues such as serious cationic mixed discharge phenomenon and poor thermal stability need to be addressed by modifying methods to enhance its electrochemical performance.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2021)

Article Materials Science, Ceramics

Effects of Al doping on the electrochemical performances of LiNi0.83Co0.12Mn0.05O2 prepared by coprecipitation

Yu Han et al.

Summary: The Ni-rich LiNi0.83Co0.12Mn0.05O2 (NCM83) cathode material is of interest for its high energy density and low cost, but suffers from poor cycle stability. By coating (Ni0.4Co0.2Mn0.4)1-xAlx(OH)2+x on precursor particles using a facile coprecipitation method, the researchers were able to improve the cycle stability of NCM83.

CERAMICS INTERNATIONAL (2021)

Article Multidisciplinary Sciences

Characteristics and electrochemical performances of silicon/carbon nanofiber/graphene composite films as anode materials for binder-free lithium-ion batteries

Ruye Cong et al.

Summary: The interfacial study focused on a Silicon/Carbon Nanofiber/Graphene composite as a potentially high-performance anode for rechargeable lithium-ion batteries. The composite films showed improved electron conductivity and stability during charge/discharge processes, resulting in a specific capacity of 1894.54 mAh/g and maintained reversible capacity of 964.68 mAh/g after 100 cycles. The Si/CNF/rGO composite electrode exhibited higher capacity and stability compared to an Si/rGO composite electrode.

SCIENTIFIC REPORTS (2021)

Article Electrochemistry

Triphenyl phosphate as an Efficient Electrolyte Additive for Nirich NCM Cathode Materials

Kwangeun Jung et al.

Summary: In this study, the use of triphenyl phosphate as an electrolyte additive greatly improved the cycling performance of nickel-rich lithium nickel-cobalt-manganese oxide (NCM811) cathode material at high temperatures, by forming an effective cathode-electrolyte interphase (CEI) layer that suppressed electrolyte decomposition.

JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Stabilizing Ni-Rich LiNi0.83Co0.12Mn0.05O2 with Cyclopentyl Isocyanate as a Novel Electrolyte Additive

Gaopan Liu et al.

Summary: The study demonstrates that the additive CPI can effectively improve the interfacial stability between Ni-rich cathode materials and carbonate electrolytes, enhancing battery cycle life and capacity retention.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Development of a Polarizable Force Field for Molecular Dynamics Simulations of Lithium-Ion Battery Electrolytes: Sulfone-Based Solvents and Lithium Salts

Oleg N. Starovoytov

Summary: A many-body polarizable force field was developed for molecular dynamics simulations of sulfone-based solvents and lithium salts, with parameters optimized for atomic polarizabilities, electrostatic interactions, and van der Waals interactions. The force field was validated through a series of simulations assessing thermodynamic, structural, and transport properties.

JOURNAL OF PHYSICAL CHEMISTRY B (2021)

Article Chemistry, Multidisciplinary

Benzoic Anhydride as a Bifunctional Electrolyte Additive for Hydrogen Fluoride Capture and Robust Film Construction over High-Voltage Li-Ion Batteries

Sen Jiang et al.

Summary: Benzoic anhydride (BA) was proposed as a promising bifunctional electrolyte additive that can enhance the performance and stability of high-voltage LiNi0.8Co0.1Mn0.1O2 (NCM811)-based Li-ion batteries. Experimental results and theoretical calculations showed that BA could effectively protect the cathode and suppress the decomposition of the electrolyte, leading to improved capacity retention.

CHEMSUSCHEM (2021)

Review Chemistry, Physical

Room-Temperature Sodium-Sulfur Batteries and Beyond: Realizing Practical High Energy Systems through Anode, Cathode, and Electrolyte Engineering

Alex Yong Sheng Eng et al.

Summary: Sodium-sulfur batteries offer a promising solution for energy storage systems with rigorous requirements, such as cost-effectiveness and high storage capacities. Key challenges include improving the anode-electrolyte interface engineering and focusing on core principles guiding use-inspired design of cathode architectures, from elemental sulfur and polysulfide cathodes to emerging host structures.

ADVANCED ENERGY MATERIALS (2021)

Article Nanoscience & Nanotechnology

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification

Xiaoyu Zhang et al.

Summary: The Co and Ti co-modified LiNi0.8Co0.1Mn0.1O2 (NCM-811) cathode effectively improves reversible capacity and rate capability by alleviating lattice structure degradation and microscopic intergranular cracks. Titanium doping reduces cation mixing and stabilizes crystal structure, while a cobalt oxide coating forms a stable spinel phase on the surface, reducing generation of micro-cracks. The T1Co0.5-NCM cathode demonstrates superior rate capability and capacity retention compared to pristine NCM-811, showing promise for high-energy LIBs.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Synergy Effect of Trimethyl Borate on Protecting High-Voltage Cathode Materials in Dual-Additive Electrolytes

Qiuyan Liu et al.

Summary: This study investigated the synergistic effects of TMB in dual-additive electrolytes on protecting high-voltage cathode materials, providing insights into a new approach for electrolyte design in lithium batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Lithium Bis(trimethylsilyl) Phosphate as a Novel Bifunctional Additive for High-Voltage LiNi1.5Mn0.5O4/Graphite Lithium-Ion Batteries

Jongjung Kim et al.

Summary: The synthesis and application of lithium bis(trimethylsilyl) phosphate (LiTMSP) as a bifunctional additive for high-voltage LiNi1.5Mn0.5O4 (LNMO)/graphite cells were investigated. LiTMSP showed improved cycle performance and inhibited the generation of HF, reducing the dissolution of transition metal ions from the LNMO electrode. Additionally, LiTMSP derived surface film enhanced lithium ion conductivity and decreased resistance of the graphite electrode, leading to improved rate performance of LNMO/graphite cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

LiNbO3-coated LiNi0.7Co0.1Mn0.2O2 and chlorine-rich argyrodite enabling high-performance solid-state batteries under different temperatures

Linfeng Peng et al.

Summary: The study investigates the enhancement of solid-state battery performance by surface modification of high-voltage cathodes using LiNbO3 coating. The LNO@NCM712 electrode shows improved cyclic performance and lower resistance changes at different rates and temperatures, providing insight into the influence of modification layers on SSB performance and guidance for cathode modification design strategy.

ENERGY STORAGE MATERIALS (2021)

Review Chemistry, Physical

Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries

Shouyi Yin et al.

Summary: This review discusses the challenges and solutions of modifying Ni-rich layered cathodes specifically for microcrack failure, including mechanisms of microcrack formation and evolution, recent advances in stabilizing the structure/interface of Ni-rich cathodes, and strategies to mitigate microcracks and improve electrochemical performance. Additionally, outlook and perspectives for practical application of Ni-rich layered cathodes in electric vehicles are provided.

NANO ENERGY (2021)

Article Chemistry, Physical

Insights into the Positive Effect of Post-Annealing on the Electrochemical Performance of Al2O3-Coated Ni-Rich NCM Cathodes for Lithium-Ion Batteries

Rajendra S. Negi et al.

Summary: Ni-rich Li(Ni0.70Co0.15Mn0.15)O-2-based cathodes were coated with a solution-based technique with a thin Al2O3 layer and post-annealed at 600 degrees C, showing a significant improvement in cycling stability. Post-annealing resulted in the formation of an amorphous Al2O3/LiAlO2 coating layer, which increased lithium-ion conductivity compared to Al2O3 coating. The coatings did not affect the activation energy of charge transport, ensuring sufficient electronic conductivity.

ACS APPLIED ENERGY MATERIALS (2021)

Article Engineering, Environmental

High performance of low-temperature electrolyte for lithium-ion batteries using mixed additives

Weixia Lv et al.

Summary: In this study, both the solvent and lithium salt were modified to enhance the low temperature performance of the electrolyte. The mixed additives of BA + EC + LBF were found to improve the capacity and voltage platform of the batteries at low temperatures by forming a thin LiF film on the cathode surface.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Chemistry, Analytical

Recent advances in cathode prelithiation additives and their use in lithium-ion batteries

Ruqian Ding et al.

Summary: The growing interest in electric vehicles and energy storage systems has increased the demand for lithium-ion battery technologies capable of providing high capacity and high energy density. Prelithiation of cathodes is a simpler method compared to anode prelithiation, and many studies are focused on finding suitable cathode additives to enhance the electrochemical performance of existing lithium-ion batteries. Challenges in effective cathode prelithiation additives and the development direction of prelithiation technology are discussed in the article.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Article Chemistry, Physical

Structural Effects of Solvents on Li-Ion-Hopping Conduction in Highly Concentrated LiBF4/Sulfone Solutions

Yosuke Ugata et al.

Summary: In this study, the effects of solvent structure on hopping conduction of Li ions in highly concentrated LiBF4/sulfone electrolytes were investigated. It was found that the structure of the solvent significantly influences the hopping conduction process, with cyclic sulfone molecules facilitating Li-ion hopping.

JOURNAL OF PHYSICAL CHEMISTRY B (2021)

Article Chemistry, Physical

Electrolytes Polymerization-Induced Cathode-Electrolyte-Interphase for High Voltage Lithium-Ion Batteries

Jixiang Yang et al.

Summary: The research shows that adding aluminum isopropoxide to commercial electrolyte can significantly improve the cycling stability of lithium-ion batteries, providing a promising approach to enhance energy density.

ADVANCED ENERGY MATERIALS (2021)

Review Energy & Fuels

An overview of modification strategies to improve LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode performance for automotive lithium-ion batteries

Hailin Zhang et al.

Summary: By overviewing the issues and challenges of NCM811 materials, as well as summarizing the modification strategies for these materials, this paper emphasizes on the future development trend and perspectives of high nickel NCM811 materials.

ETRANSPORTATION (2021)

Article Chemistry, Physical

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li+-conducting cathode-electrolyte interphase

Shixuan Wang et al.

Summary: This study proposes a strategy for the first time to form an artificial Li+-conducting cathode-electrolyte interphase (ALCEI) on the Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode surface, which simultaneously protects NCM particles from electrolyte corrosion and facilitates Li+ ion transport, enabling stable and high-rate cycling of NCM811.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Materials Science, Ceramics

Challenges and recent progress in LiNixCoyMn1-x-yO2 (NCM) cathodes for lithium ion batteries

Chul-Ho Jung et al.

Summary: This article focuses on the capacity/voltage fading mechanisms of NCM to provide important clues for the future design of layered lithium transition metal oxides. It discusses the crystal and electronic structure of layered oxides related to NCM mechanochemical breakdown and provides insights on finding correlations between degradation mechanisms. Additionally, novel approaches proposed to prolong the cycle life of NCM cathodes are presented.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2021)

Article Chemistry, Multidisciplinary

A Designed Durable Electrolyte for High-Voltage Lithium-Ion Batteries and Mechanism Analysis

Yeguo Zou et al.

CHEMISTRY-A EUROPEAN JOURNAL (2020)

Article Chemistry, Physical

Enhanced cyclic stability of Ni-rich lithium ion battery with electrolyte film-forming additive

Guangyuan Lan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Multidisciplinary

One-Step Integrated Comodification to Improve the Electrochemical Performances of High-Voltage LiCoO2 for Lithium-Ion Batteries

Run Gu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Nanoscience & Nanotechnology

Unanticipated Mechanism of the Trimethylsilyl Motif in Electrolyte Additives on Nickel-Rich Cathodes in Lithium-Ion Batteries

Min Woo Park et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Electrochemistry

Electrochemical Study of Functional Additives for Li-Ion Batteries

Zaynab Khodr et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Review Energy & Fuels

NCA, NCM811, and the Route to Ni-Richer Lithium-Ion Batteries

Christian M. Julien et al.

ENERGIES (2020)

Article Nanoscience & Nanotechnology

High-Performance and Industrially Feasible Ni-Rich Layered Cathode Materials by Integrating Coherent Interphase

Kyoungmin Min et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Analytical

Enhanced electrochemical performance of LiNi0.8CO0.1Mn0.1O2 by surface modification with lithium-active MoO3

Jie Huang et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2018)

Article Electrochemistry

Effect of Ambient Storage on the Degradation of Ni-Rich Positive Electrode Materials (NMC811) for Li-Ion Batteries

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Chemistry, Physical

Intrinsic origin of intra-granular cracking in Ni-rich layered oxide cathode materials

Kyoungmin Min et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

Article Chemistry, Physical

Direct Evidence for Li Ion Hopping Conduction in Highly Concentrated Sulfolane-Based Liquid Electrolytes

Kaoru Dokko et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2018)

Article Chemistry, Physical

Electronic Structure and Comparative Properties of LiNixMnyCozO2 Cathode Materials

Hong Sun et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Article Chemistry, Physical

Chemical versus Electrochemical Electrolyte Oxidation on NMC111, NMC622, NMC811, LNMO, and Conductive Carbon

Roland Jung et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Article Nanoscience & Nanotechnology

From Coating to Dopant: How the Transition Metal Composition Affects Alumina Coatings on Ni-Rich Cathodes

Binghong Han et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Electrochemical behaviours of SiO2-coated LiNi0.8Co0.1Mn0.1O2 cathode materials by a novel modification method

Longwei Liang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Review Chemistry, Multidisciplinary

Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries

Wen Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Article Chemistry, Physical

Long cycle life lithium ion battery with lithium nickel cobalt manganese oxide (NCM) cathode

Shuang Liu et al.

JOURNAL OF POWER SOURCES (2014)

Article Chemistry, Physical

Bulk and surface analyses of ageing of a 5V-NCM positive electrode material for lithium-ion batteries

Claire Villevieille et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Electrochemistry

Lithium Tetrafluoroborate as an Electrolyte Additive to Improve the High Voltage Performance of Lithium-Ion Battery

Xiaoxi Zuo et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Electrochemistry

Methods to obtain excellent capacity retention in LiCoO2 cycled to 4.5 V

ZH Chen et al.

ELECTROCHIMICA ACTA (2004)

Article Chemistry, Physical

Ionic liquids containing carbonate solvent as electrolytes for lithium ion cells

T Sato et al.

JOURNAL OF POWER SOURCES (2004)

Review Materials Science, Multidisciplinary

Recent developments in lithium ion batteries

M Wakihara

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2001)