4.8 Article

Alkaline anion exchange membrane containing pyrene-based p-p stacking interactions br

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Branched Poly(Aryl Piperidinium) Membranes for Anion-Exchange Membrane Fuel Cells

Xingyu Wu et al.

Summary: The research team has successfully prepared high-molecular-weight branched poly(aryl piperidinium) AEMs, which exhibit high OH- conductivity and dimensional stability. The optimized membrane b-PTP-2.5 performs well at 80 degrees Celsius, with high mechanical strength and alkaline stability, as well as achieving good peak power densities in both H-2-O-2 and H-2-air.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Engineering, Chemical

Low boiling point solvent-soluble, highly conductive and stable poly (ether phenylene piperidinium) anion exchange membrane

Jie Liu et al.

Summary: In this study, a cheap, highly-conductive, and alkali-resistant anion exchange membrane was synthesized through super acid catalysis. The membrane exhibited high conductivity and good alkaline stability, making it suitable for fuel cell applications.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Engineering, Chemical

Soluble poly(aryl piperidinium) with extended aromatic segments as anion exchange membranes for alkaline fuel cells and water electrolysis

Min Liu et al.

Summary: The superacid-catalyzed polymerization and quaternization reaction is an effective method for preparing AEM materials with high conductivity and stability. The PQP-100 AEM shows excellent conductivity, morphology stability, catalytic efficiency, and advantages in membrane thickness.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Chemistry, Multidisciplinary

Ultrathin and Super Strong UHMWPE Supported Composite Anion Exchange Membranes with Outstanding Fuel Cells Performance

Wei Yuan et al.

Summary: In this study, composite anion exchange membranes (AEMs) based on ultrahigh molecular weight polyethylene (UHMWPE) were successfully prepared by in situ bulk polymerization. The as-prepared composite membranes exhibited super high strength, ultrathin thickness, and excellent properties including low permeation, low water uptake, low dimensional swelling, high conductivity and good alkaline stability. Moreover, the fuel cell performance based on the ultrathin composite AEMs showed outstanding peak power density and good short-term durability.
Article Chemistry, Physical

Robust and durable poly(aryl-co-aryl piperidinium) reinforced membranes for alkaline membrane fuel cells

Chuan Hu et al.

Summary: High-performance poly(aryl-co-aryl piperidinium) reinforced membranes with excellent mechanical and chemical durability, gas tightness, and dimensional stability were reported for alkaline energy device applications.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Physical

Di-piperidinium-crosslinked poly(fluorenyl-co-terphenyl piperidinium)s for high-performance alkaline exchange membrane fuel cells

Nanjun Chen et al.

Summary: We report a scalable polymer with high ion exchange capacity for the development of anion exchange membrane fuel cells. The fuel cells exhibit excellent electrochemical performance, mechanical strength, and stability under different conditions, with low voltage decay rate.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Physical

Poly(fluorene alkylene) Anion Exchange Membranes with Pendant Spirocyclic and Bis-Spirocyclic Quaternary Ammonium Cations

Dong Pan et al.

Summary: Anion exchange membranes (AEMs) functionalized with alicyclic quaternary ammonium cations demonstrate high alkaline stability, thermal stability, mechanical properties, and high conductivity. AEMs prepared with certain cations showed excellent alkaline stability and conductivity, making them suitable for applications in fuel cells and water electrolyzers.

ACS APPLIED ENERGY MATERIALS (2022)

Article Engineering, Chemical

Elucidating the role of alkyl chain in poly(aryl piperidinium) copolymers for anion exchange membrane fuel cells

Chuan Hu et al.

Summary: Poly(aryl-co-aryl piperidinium) (c-PAP) has attracted attention in anion exchange membrane fuel cells. In this study, poly(aryl-co-terphenyl piperidinium)-x (PDnTP-x) AEMs with different alkyl spacers were investigated. Long alkyl chains improved dimensional stability and gas tightness, while short-chain-type membranes exhibited higher ion conductivity. All membranes showed excellent alkaline and oxidative stability. Short-chain-type PD0TP-x based AEMFC achieved a new-record power density and stable operation.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Engineering, Chemical

Hydrogen bonding assisted OH- transport under low humidity for rapid start-up in AEMFCs

Wanjie Song et al.

Summary: This study reports an AEM with a urea-based structure that exhibits excellent performance under low humidity conditions. Micro-structure analysis and molecular dynamics simulation show that hydrogen bonding between urea-based structures enhances the self-assembly ability and OH- conduction pathway of the AEM. The hydrogen bond network formed by urea-urea and urea-water groups endows the AEM with excellent water retention ability, reducing the dependence of OH- conduction on humidity. The research provides significant guidance for rapid start-up in AEM fuel cells.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Engineering, Chemical

Poly(terphenyl piperidinium) containing hydrophilic crown ether units in main chains as anion exchange membranes for alkaline fuel cells and water electrolysers

Xin Wang et al.

Summary: Poly(arylene piperidinium) polymers with hydrophilic crown ether units were synthesized and showed improved hydroxide conductivity and stability, making them promising materials for AEM-based electrochemical devices.

JOURNAL OF MEMBRANE SCIENCE (2022)

Review Chemistry, Multidisciplinary

Anion-conducting polyelectrolytes for energy devices

Nanjun Chen et al.

Summary: This article summarizes the importance of anion-conducting polyelectrolytes (ACPs) in alkaline energy devices and provides a review on the progress of ACPs and their applications. It highlights the significance of durable cationic groups, promising polymer backbones, and state-of-the-art AEMs and ionomers in alkaline devices, and suggests that future research should focus on these aspects.

TRENDS IN CHEMISTRY (2022)

Article Engineering, Chemical

Cation-dipole interaction that creates ordered ion channels in an anion exchange membrane for fast OH- conduction

Jianjun Zhang et al.

Summary: By introducing cation-dipole interactions, the self-assembly of ion-conducting channels in anion-exchange membranes can be enhanced, leading to higher ion conductivity and peak power density.

AICHE JOURNAL (2021)

Article Chemistry, Multidisciplinary

Poly(Alkyl-Terphenyl Piperidinium) Ionomers and Membranes with an Outstanding Alkaline-Membrane Fuel-Cell Performance of 2.58 W cm-2

Nanjun Chen et al.

Summary: The study introduces aliphatic chain-containing PDTP copolymers to enhance the performance of AEMFCs. By reducing phenyl content in AEIs and improving mechanical properties in AEMs, PDTP materials exhibit excellent performance indicators such as mechanical properties, fuel barrier properties, ion conductivity, and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Asymmetric cycling of vanadium redox flow batteries with a poly(arylene piperidinium)-based anion exchange membrane

Amirreza Khataee et al.

Summary: The potential application of a 50 mu m thick anion exchange membrane based on PTPT for VRFBs is investigated. PTPT shows lower vanadium permeation and longer self-discharge duration compared to Nafion 212. Additionally, asymmetric cycling is more effective and efficient for the VRFB assembled with PTPT, with capacity fade of 0.03% cycle(-1) and the highest coulombic efficiency of 98.8% achieved.

JOURNAL OF POWER SOURCES (2021)

Article Engineering, Chemical

Chemically & physically stable crosslinked poly(aryl-co-aryl piperidinium)s for anion exchange membrane fuel cells

Nanjun Chen et al.

Summary: The in-situ styrene-crosslinked c-PAP (x-PAP-PS) membranes exhibit high ion conductivity, mechanical strength, and durability, maintaining stability under harsh conditions. These membranes show improved water retention capacity at low relative humidity and achieve high power densities in AEMFCs.

JOURNAL OF MEMBRANE SCIENCE (2021)

Review Polymer Science

Anion exchange polyelectrolytes for membranes and ionomers

Nanjun Chen et al.

Summary: Anion exchange membrane fuel cells (AEMFCs) are considered a low-cost alternative to proton exchange membrane fuel cells (PEMFCs) for clean energy conversion, as they utilize non-platinum group metals as electrocatalysts under alkaline conditions. The development of high-performance anion-exchange polyelectrolytes (AEPs) has led to significant progress in power density and durability of AEMFCs, making them comparable to or even better than PEMFCs.

PROGRESS IN POLYMER SCIENCE (2021)

Article Chemistry, Multidisciplinary

Improved Self-Assembly of P3HT with Pyrene-Functionalized Methacrylates

Taniya M. S. K. Pathiranage et al.

Summary: A block copolymer with discotic liquid crystalline behavior was successfully synthesized via ICAR-ATRP and GRIM techniques, reducing catalyst usage and improving purity and yield of the final product by simplifying post-synthesis purification. The stacked pyrene units in the copolymer enhanced long-range pi-pi interactions, leading to improved charge transport properties.

ACS OMEGA (2021)

Article Polymer Science

Pyrene-Enhanced Ferromagnetic Interaction in a FeCl4--Based Poly(ionic liquid)s Organic Magnet

Xiaoliang Yu et al.

Summary: This research enhances the ferromagnetic interactions in magnetic ionic liquids by introducing pi-pi stacking planar pyrene groups, leading to the design of soft ferromagnetic organic magnets.

MACROMOLECULES (2021)

Article Multidisciplinary Sciences

Poly(fluorenyl aryl piperidinium) membranes and ionomers for anion exchange membrane fuel cells

Nanjun Chen et al.

Summary: The study presents a series of durable poly(fluorenyl aryl piperidinium) ionomers and membranes with high OH- conductivity and excellent mechanical properties for improved performance of alkaline fuel cells. Innovative design of poly(fluorenyl aryl piperidinium) copolymers is explored to extend their applications in anion exchange membrane fuel cells.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Precise Regulation of Distance between Associated Pyrene Units and Control of Emission Energy and Kinetics in Solid State

Jiaqiang Wang et al.

Summary: Various approaches have been explored to tune emission behaviors of organic luminogens, but precise regulation of distances between molecules in dimers is rarely reported. This study introduces a method to precisely control distances in dimers, and analyzes the pi-pi interactions with different distances between molecules. The results show that short distances and strong pi-pi interactions are essential for lowering excited-state energy and weakening delayed fluorescence.

CCS CHEMISTRY (2021)

Article Engineering, Chemical

Rational design of comb-shaped poly(arylene indole piperidinium) to enhance hydroxide ion transport for H2/O2 fuel cell

Xixing Zhou et al.

Summary: This study proposes a ternary copolymerization strategy to produce anion exchange membranes with high conductivity and chemical stability, utilizing comb-shaped copolymers with hydrophobic side chains attached to the backbone to stabilize the cation and achieve favorable morphology and performance.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Physical

Chemo-stable poly(quinquephenylene-co-diphenylene piperidinium) ionomers for anion exchange membrane fuel cells

Yake Yang et al.

Summary: This study demonstrates the excellent alkaline and oxidative stabilities of poly (quinquephenylene-co-diphenylene piperidinium) (PQDP) AEMs with mechanical robustness and high ion conductivities. The PQDP membranes show high anion conductivity and stability, with a fuel cell prototype using PQDP-3 exhibiting a high peak power density.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Branched, Side-Chain Grafted Polyarylpiperidine Anion Exchange Membranes for Fuel Cell Application

Lei Bai et al.

Summary: The study reports the synthesis of ether-free polymers with different degrees of Y-shaped branching as AEM materials, which can increase the free volume of the AEM and thus help build ion channels with lower hydroxide ion transport resistance, improving the ionic conductivity.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Flexible Bis-piperidinium Side Chains Construct Highly Conductive and Robust Anion-Exchange Membranes

Jianjun Zhang et al.

Summary: This study prepared a series of anion-exchange membranes with high ion conductivity and chemical stability, promoting the self-assembly of cationic groups through a special structure to enhance ion transport rate and stability.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

High-performance anion exchange membrane water electrolyzers with a current density of 7.68 A cm-2 and a durability of 1000 hours

Nanjun Chen et al.

Summary: The study introduces a new technology of PFAP-based AEMWEs with higher performance than PEMWEs, highlighting the importance of high water diffusivity and ion conductivity.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Chemistry, Physical

Alkaline membrane fuel cells: anion exchange membranes and fuels

Masa Hren et al.

Summary: Alkaline anion exchange membrane fuel cells are gaining increasing attention as promising electrochemical devices for energy production. Significant progress has been made in designing and developing synthetic or naturally-derived anion exchange membrane, although challenges remain in terms of long-term stability.

SUSTAINABLE ENERGY & FUELS (2021)

Article Chemistry, Physical

Self-aggregating cationic-chains enable alkaline stable ion-conducting channels for anion-exchange membrane fuel cells

Jianjun Zhang et al.

Summary: The precise manipulation of the polyelectrolyte self-assembly process to form specific microstructures with ion-conducting channels is crucial for various fields. By introducing dipolar ethylene oxide spacers in the cationic side chain, a new strategy for designing self-aggregating side chains with optimized alkaline stability has been developed, leading to the creation of AEMs with enhanced conductivity and alkaline stability. This innovative concept shows promising results in terms of hydroxide conductivity, peak power density, and alkaline stability in fuel cell applications.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Polymer Science

Alkaline-stable anion exchange membranes: A review of synthetic approaches

Wei You et al.

PROGRESS IN POLYMER SCIENCE (2020)

Review Chemistry, Multidisciplinary

Durability challenges of anion exchange membrane fuel cells

William E. Mustain et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Chemistry, Multidisciplinary

Crystal Engineering of Organic Optoelectronic Materials

Panpan Yu et al.

Article Chemistry, Multidisciplinary

Ionic Highways from Covalent Assembly in Highly Conducting and Stable Anion Exchange Membrane Fuel Cells

Yoonseob Kim et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Review Materials Science, Multidisciplinary

A review of the synthesis and characterization of anion exchange membranes

Kimberly F. L. Hagesteijn et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Article Chemistry, Physical

Alkaline polymer electrolyte fuel cells stably working at 80 °C

Hanging Peng et al.

JOURNAL OF POWER SOURCES (2018)

Review Chemistry, Physical

Review of cell performance in anion exchange membrane fuel cells

Dario R. Dekel

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Multidisciplinary

Poly(arylene piperidinium) Hydroxide Ion Exchange Membranes: Synthesis, Alkaline Stability, and Conductivity

Joel S. Olsson et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Engineering, Manufacturing

Mechanical properties of graphene films enhanced by homo-telechelic functionalized polymer fillers via π-π It stacking interactions

Jizhen Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Chemistry, Physical

ReaxFF Reactive Molecular Dynamics Simulation of Functionalized Poly(phenylene oxide) Anion Exchange Membrane

Weiwei Zhang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Article Chemistry, Multidisciplinary

Constructing ionic highway in alkaline polymer electrolytes

Jing Pan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Multidisciplinary

Anion-exchange membranes in electrochemical energy systems

John R. Varcoe et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Review Chemistry, Multidisciplinary

Alkaline polymer electrolyte membranes for fuel cell applications

Yan-Jie Wang et al.

CHEMICAL SOCIETY REVIEWS (2013)

Article Engineering, Chemical

Polyethylene-based radiation grafted anion-exchange membranes for alkaline fuel cells

Tauqir A. Sherazi et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

Article Chemistry, Physical

Synthesis and fluorescence emission properties of 1,3,6,8-tetraarylpyrenes

Jian-Yong Hu et al.

JOURNAL OF MOLECULAR STRUCTURE (2013)

Article Chemistry, Multidisciplinary

Amplification of Chirality by Supramolecular Polymerization of Pyrene Oligomers

Alina L. Nussbaumer et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)

Article Polymer Science

A novel, one-pot synthesis of novel 3F, 5F, and 8F aromatic polymers

Adan M. Diaz et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2007)