☆ 4.5 Article

Molecular dynamics simulation on creep-ratcheting behavior of columnar nanocrystalline aluminum

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Quantitative analysis of grain boundary diffusion, segregation and precipitation at a sub-nanometer scale

Zirong Peng et al.

Summary: Grain boundaries are common microstructural imperfections in polycrystalline and nanocrystalline materials, affecting their properties and stabilities. Research has found that fast diffusion primarily occurs in the core region of grain boundaries, while segregated solute atoms occupy a larger spatial range. The formation of secondary phase nuclei at matrix grain boundaries is influenced by their complex three-dimensional topology.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Engineering, Mechanical

Creep-fatigue interaction and damage behavior in 9-12%Cr steel under stress-controlled cycling at elevated temperature: Effects of holding time and loading rate

Zhi Liu et al.

Summary: This study investigated the creep fatigue behavior of 9-12%Cr steel under stress-controlled cycling at elevated temperature, considering most previous tests were conducted under strain-controlled mode. The effects of holding time and loading rate on deformation and damage behavior were particularly focused. The results showed that a significant creep ratcheting was generally observed in the creep-fatigue tests with the stress ratio of -1. Ratcheting strain and creep damage progressed faster with longer holding time or lower loading rate, leading to a decrease in the number of cycles to creep-fatigue failure.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Biochemical Research Methods

On the mechanical properties and fracture analysis of polymer nanocomposites reinforced by functionalized silicon carbide nanotubes: A molecular dynamics investigation

M. Eghbalian et al.

Summary: The mechanical characteristics of reinforced polymer nanocomposites with Hydrogen (H)- and Fluorine (F)functionalized silicon carbide nanotubes (H-and F-fSiCNTs) are investigated using molecular dynamics simulations. It is found that by increasing the degree of functionalization, the maximum stress, maximum strain, elastic modulus, and strain energy of the materials decrease. Incorporating fSiCNTs into the polymer matrix leads to a significant improvement in the ultimate strength of nanocomposites compared to pure polymer.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2022)

添加到收藏夹

Article Biochemical Research Methods

Molecular modelling and dynamics simulations of single-wall carbon nanotube as a drug carrier: New insights into the drug-loading process

Natalia L. von Ranke et al.

Summary: This study investigates the interactions between single-wall carbon nanotubes and three different anticancer drugs using computer modeling approaches. The results show that the physicochemical characteristics of the drugs influence their affinity towards the carbon nanotubes, and a diameter of 20.3 angstrom is found to be the most favorable for encapsulating the drugs.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2022)

添加到收藏夹

Article Biochemical Research Methods

Insights from molecular dynamics simulations of albumin adsorption on hydrophilic and hydrophobic surfaces

Mohammad Moulod et al.

Summary: This study investigates the adsorption mechanism of albumin on hydrophilic and hydrophobic surfaces and finds that hydration significantly increases adsorption. The orientation of albumin depends on local charge effects, while different surface properties have a significant impact on adsorption.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Revealing the size effect mechanism of reversible grain boundary migration in nanocrystalline coppers: Molecular dynamics simulations and a refined disconnection model

Anping Hua et al.

Summary: The reversibility of the representative Sigma 11(113) grain boundary migration in copper bicrystals under cyclic shear strongly depends on their grain sizes, with a transition mechanism from fully reversible disconnection-mediated migration to irreversible structural damage. The study also developed a refined disconnection model considering grain size to predict migration behavior and interpret the forming mechanism of disconnection pair grooving (DPG).

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Formation of columnar strengthening phases and mechanical properties of Nb-Ti-Al alloy by spark plasma sintering

Xuan Wang et al.

Summary: In this study, Nb-27.3Ti-18Al alloys with columnar strengthening phases were fabricated by SPS and MA. The microstructure evolution and toughening mechanisms of two different powders were analyzed, showing the promotion of columnar phase formation by a specific powder and the good fracture toughness of alloy with 27.3 atomic percentage Ti content.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Loading Direction-Dependent Mechanical Properties of Columnar Polycrystal: A Molecular Dynamics Study

Hua Zhu et al.

Summary: Through compression tests using molecular dynamics simulations, the mechanical properties and plastic deformation behaviors of columnar polycrystal materials were studied. The results showed that different inclined angles between the orientation of grains and loading direction led to anisotropic mechanical properties, with differences in yield stress and flow stress among the tested samples. These differences were attributed to geometric constraints of grain boundaries and the available slip systems of different grains.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Biochemical Research Methods

Strain controlled fatigue response of large-scale perfect and defect nickel nanowires: A molecular dynamics study

Natraj Yedla

Summary: In this study, the response of nickel nanowires to cyclic deformation under different strain amplitudes was investigated. It was found that slip lines or slip bands do not appear on the NW's surface at strain amplitudes below 0.04, and compressive stress is higher than tensile stress. The width of the stress-strain loops increases with both strain amplitude and cycles due to softening, and no fracture occurred even after 1000 cycles of cyclic deformation.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Molecular dynamics simulation-based study of creep-ratcheting behavior of nanocrystalline aluminum

Pokula Narendra Babu et al.

Summary: In this study, molecular dynamics simulations were used to investigate the creep-ratcheting deformation behavior of nanocrystalline aluminum with an average grain size of 8 nm. The influence of deformation temperature on creep-ratcheting behavior was observed, with differences in structural evolution and microstructural changes at different temperatures affecting the process. Moreover, the highest dislocation density was found for room temperature creep-ratcheting deformation, and certain dislocations were identified as driving factors for the process.

APPLIED NANOSCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of travel speed on microstructure and mechanical properties of wire plus arc additively manufactured 2219 aluminum alloy

Yinghui Zhou et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Uniaxial Ratcheting Assessment of 304 Stainless Steel Samples Undergoing Step-Loading Conditions at Room and Elevated Temperatures

P. Karvan et al.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Article Engineering, Biomedical

Ratcheting-fatigue behavior of trabecular bone under cyclic tensile-compressive loading

Xianglong Lin et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Article Biochemical Research Methods

On the mechanical stability and buckling analysis of carbon nanotubes filled with ice nanotubes in the aqueous environment: A molecular dynamics simulation approach

S. Ajori et al.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of experimental aspects in ratcheting fatigue: microstructure to specimen to component

Surajit Kumar Paul

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Molecular Dynamics Simulation Study of Uniaxial Ratcheting Behaviors for Ultrafine-Grained Nanocrystalline Nickel

Snehanshu Pal et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Influence of dislocations, twins, and stacking faults on the fracture behavior of nanocrystalline Ni nanowire under constant bending load: a molecular dynamics study

K. Vijay Reddy et al.

JOURNAL OF MOLECULAR MODELING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Time-dependent ratcheting of 35CrMo structural steel at elevated temperature considering stress rates

Wei Wang et al.

MATERIALS AT HIGH TEMPERATURES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of the effects of grain size on the mechanical properties of nanocrystalline copper using molecular dynamics simulation with initial realistic samples

A. Rida et al.

PHILOSOPHICAL MAGAZINE (2017)

添加到收藏夹

Article Materials Science, Characterization & Testing

Creep-ratcheting behavior of PTFE gaskets under various temperatures

Xiaotao Zheng et al.

POLYMER TESTING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

An atomic-level understanding of the strengthening mechanism of aluminum matrix composites reinforced by aligned carbon nanotubes

Xiang Junfeng et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The Effect of Temperature on Creep Behaviour of Porous (1 at.%) Nano Crystalline Nickel

Md. Meraj et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structural evaluation and deformation features of interface of joint between nano-crystalline Fe-Ni-Cr alloy and nano-crystalline Ni during creep process

S. Pal et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Atomsk: A tool for manipulating and converting atomic data files

Pierre Hirel

COMPUTER PHYSICS COMMUNICATIONS (2015)

添加到收藏夹

Article Materials Science, Composites

Compressive behavior of CNT-reinforced aluminum composites using molecular dynamics

Nuno Silvestre et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

The Bree problem with different yield stresses on-load and off-load and application to creep ratcheting

R. A. W. Bradford et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2014)

添加到收藏夹

Article Engineering, Mechanical

About the cyclic accumulation of the inelastic strain observed in metals subjected to cyclic stress control

Lakhdar Taleb

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Automated identification and indexing of dislocations in crystal interfaces

Alexander Stukowski et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructures and tensile behavior of carbon nanotubes reinforced Cu matrix composites with molecular-level dispersion

Z. W. Xue et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ratcheting phenomenon and post-ratcheting tensile behaviour of an aluminum alloy

Krishna Dutta et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Engineering, Mechanical

Ratcheting-creep interaction of advanced 9-12% chromium ferrite steel with anelastic effect

Xiao-Tao Zheng et al.

INTERNATIONAL JOURNAL OF FATIGUE (2011)

添加到收藏夹

Article Engineering, Mechanical

Cyclic accumulation of the inelastic strain in the 304L SS under stress control at room temperature: Ratcheting or creep?

Lakhdar Taleb et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ratchetting behavior of advanced 9-12% chromium ferrite steel under creep-fatigue loadings

Peng Zhao et al.

MECHANICS OF MATERIALS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Theory of shear banding in metallic glasses and molecular dynamics calculations

Futoshi Shimizu et al.

MATERIALS TRANSACTIONS (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structural nanocrystalline materials: an overview

Carl C. Koch

JOURNAL OF MATERIALS SCIENCE (2007)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of nanocrystalline materials

MA Meyers et al.

PROGRESS IN MATERIALS SCIENCE (2006)

添加到收藏夹

Article Engineering, Multidisciplinary

Analysis of cyclic creep and rupture. Part 2: Calculation of cyclic reference stresses and ratcheting interaction diagrams

P Carter

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Triple junction nanocracks in deformed nanocrystalline materials

IA Ovid'ko et al.

ACTA MATERIALIA (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dislocations emitted from nanocrystalline grain boundaries: nucleation and splitting distance

AG Froseth et al.

ACTA MATERIALIA (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Atomistic simulations as guidance to experiments

PM Derlet et al.

SCRIPTA MATERIALIA (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dislocation-dislocation and dislocation-twin reactions in nanocrystalline Al by molecular dynamics simulation

V Yamakov et al.

ACTA MATERIALIA (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crossover from grain boundary sliding to rotational deformation in nanocrystalline materials

MY Gutkin et al.

ACTA MATERIALIA (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Triple junction diffusion and plastic flow in fine-grained materials

AA Fedorov et al.

SCRIPTA MATERIALIA (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain-boundary diffusion creep in nanocrystalline palladium by molecular-dynamics simulation

V Yamakov et al.

ACTA MATERIALIA (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanisms of grain growth in nanocrystalline fcc metals by molecular-dynamics simulation

AJ Haslam et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Importance of columnar grains in dictating hot ductility of steels

B Mintz et al.

MATERIALS SCIENCE AND TECHNOLOGY (2000)

添加到收藏夹

Review Physics, Atomic, Molecular & Chemical

Nanocrystalline materials - Current research and future directions

C Suryanarayana et al.

HYPERFINE INTERACTIONS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.