☆ 4.7 Article

Mechanistic investigation on Ce addition in tuning recrystallization behavior and mechanical property of Mg alloy

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet

Qingshan Yang et al.

Summary: Controlling grain orientation through twinning activity is crucial for understanding the deformation mechanism of Mg alloy sheets. Precompression can generate {10-12} twin-texture components, providing an alternative way to improve the formability of Mg alloy sheets.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dislocation facilitated formation and evolution of basal-prismatic/prismatic-basal interfaces in a Mg alloy

Huhu Su et al.

Summary: The formation and evolution of basal-prismatic/prismatic-basal (BP/PB) interfaces in a Mg alloy under cyclic deformation were studied and modeled based on atomic-resolution experimental observations and interfacial defects theory. It was found that BP/PB interfaces could be formed by emission of specific dislocations and twinning disconnections, and could transform into twin boundaries. The experimental results offer insights into the dislocation-assisted mechanisms of formation and evolution of BP/PB interfaces in hexagonal-close-packed materials.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A quantitative study on planar mechanical anisotropy of a Mg-2Zn-1Ca alloy

Xinde Huang et al.

Summary: A strong planar yield anisotropy was quantitatively studied in a Mg-2Zn-1 Ca alloy, showing that it exists regardless of grain size and is absent in a texture with circular distribution of basal poles. Basal slip and prismatic slip, as well as extension twinning, were identified as important mechanisms in the yield process. The parameters of Hall-Petch relation were used to analyze the anisotropy mechanism.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of texture on deformation behavior of heterogeneous Mg-13Gd alloy with strength-ductility synergy

Shuaishuai Liu et al.

Summary: Heterostructure metals exhibit an excellent combination of strength and ductility by grain refinement, texture strengthening, and coordination of plastic deformation through non-basal slips and cross slips.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of extrusion speed on microstructure and mechanical properties of the Mg-Ca binary alloy

Jingren Li et al.

Summary: The study found that the extrusion speed of Mg-Ca binary alloys affects their microstructures and mechanical properties. Increasing extrusion speed leads to a decrease in yield strength, an increase in elongation, and changes in grain structure.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The preferential growth and related textural evolution during static recrystallization in a cold-rolled Mg-Zn-Gd alloy

L. Y. Zhao et al.

Summary: The grain growth process in magnesium alloys, specifically in the Mg-Zn-Gd alloy, shows gradual growth with increasing annealing time, closely associated with texture changes.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Orientations of nuclei during static recrystallization in a cold-rolled Mg-Zn-Gd alloy

L. Y. Zhao et al.

Summary: The study tracked the static recrystallization process of a cold-rolled Mg-Zn-Gd alloy using a quasi-in-situ electron backscatter diffraction method, revealing that the orientation distribution of nuclei is associated with nucleation mechanism. Continuous and discontinuous static recrystallization nuclei have different orientation characteristics.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Origin of Activation of Non-basal Slip in Mg-Ce Dilute Alloy: An Atomistic Simulation Study

Jong-Kwan Lee et al.

Summary: The addition of a small amount of Ce in Mg alloys reduces the CRSS anisotropy among slip systems, activates non-basal slip, and improves the alloy's ductility.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Texture development and dislocation activities in Mg-Nd and Mg-Ca alloy sheets

C. Ha et al.

Summary: This study investigated the differences in texture development and active deformation mechanisms during sheet rolling for binary Mg-RE or Mg-Ca alloys compared to their ternary counterparts with Zn. The analyses were based on in-situ synchrotron experiments and electron backscatter diffraction measurements, revealing direct experimental evidence of texture development and active deformation mechanisms. Higher activations of nonbasal a c+a 1010 a a c+a a slip in the Zn-containing ternary alloys were confirmed through EBSD misorientation analysis.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Multidisciplinary Sciences

The role of dislocation-solute interactions on the creep behaviour of binary Mg-RE alloys

Jing Li et al.

Summary: The study reveals that the interaction between dislocations and Gd atoms is the key factor affecting creep resistance in Mg-0.5Ce and Mg-2Gd alloys.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Generalized Slip Operation Factor Considering Contribution of Secondary Slip Systems

Yoshiki Kawano et al.

Summary: This study extended the slip operation factor (SOF) to adapt to individual slip systems and considered the contribution of secondary slip systems, resulting in the development of the generalized SOF (SOFS) and the modified version (MSOF). Experimental results showed that SOFS provided similar results to slip strain distributions for individual slip systems when single slips were dominant and the deformation was slight, while MSOF predicted strain distributions with higher accuracy compared to SOF.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Engineering, Mechanical

Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy

Zhufeng He et al.

Summary: This study presents a novel strategy of heavy nitrogen-doping in a low-cost metastable FeMnCoCr HEA to produce ultrastrong, tough, and low-cost HEAs. By simple thermomechanical processing, a multiheterostructure was formed, leading to a significant increase in yield strength and uniform elongation of the material. The high-nitrogen duplex alloy design strategy developed here provides a new paradigm for developing high-performance fcc HEAs.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of novel lightweight and cost-effective Mg-Ce-Al wrought alloy with high strength

Hucheng Pan et al.

Summary: A new mechanism of linear/planar cosegregation of solutes has been discovered in Mg alloys, leading to ultrafine grains formation. The addition of tiny Al into Mg-Ce alloy promotes the formation of Ce-Al-enriched segregation along dislocations and grain boundaries, effectively counterbalancing thermally activated dislocation recovery and guaranteeing grain refinement. Ultra-fined grains are mainly related to both linear and planar cosegregation of solutes, rather than traditional planar segregations and/or nanoprecipitations at grain boundaries.

MATERIALS RESEARCH LETTERS (2021)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Research advances in magnesium and magnesium alloys worldwide in 2020

Yan Yang et al.

Summary: Research on magnesium alloys remains a significant focus, with a strong emphasis on microstructure control, mechanical properties, corrosion and protection, and functional magnesium materials. Future research will concentrate on synergistic microstructure control, development of functional materials, corrosion protection measures, and advanced processing technology improvements.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests

Jingya Wang et al.

Summary: The effect of Ca and Zn in solid solution on the critical resolved shear stress (CRSS) of different slip systems in Mg alloys was investigated, revealing changes in plastic anisotropy and twin growth. The results showed that the addition of solute atoms increased the CRSS for basal slip and decreased the CRSS for pyramidal slip, leading to improved ductility and formability in the Mg-Ca-Zn alloys.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study of high ductility Mg-2Gd-0.4Zr magnesium alloy under monotonic tension at room temperature

Tianxu Zheng et al.

Summary: The high ductility of the Mg-2Gd-0.4Zr alloy at room temperature is attributed to the rare earth texture, higher proportion of non-basal slip, high grain boundary strength, and synergy between twinning and dislocation. Local strain compatibility may also contribute to its high ductility.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanistic investigation of a low-alloy Mg-Ca-based extrusion alloy with high strength-ductility synergy

Hucheng Pan et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of basal < a > and pyramidal < c plus a > slips in Mg-Y alloys using micro-pillar compression

Jing Wu et al.

PHILOSOPHICAL MAGAZINE (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Tailoring strength-ductility balance of caliber-rolled AZ31 Mg alloy through subsequent annealing

Taein Kong et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

High strength and ductility Mg-8Gd-3Y-0.5Zr alloy with bimodal structure and nano-precipitates

Xiaoxiao Wei et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

The texture and its optimization in magnesium alloy

Jialin Wu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Thermodynamics and kinetics of phase transformation in rare earth-magnesium alloys: A critical review

Qun Luo et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure, Deformation, and Property of Wrought Magnesium Alloys

J. F. Nie et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Oriented nucleation causing unusual texture transition during static recrystallization annealing in cold-rolled Mg-Zn-Gd alloys

L. Y. Zhao et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Large plasticity in magnesium mediated by pyramidal dislocations

Bo-Yu Liu et al.

SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength

Hucheng Pan et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 2-shear bands

Dikai Guan et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of slip activity in a Mg-Y alloy by in situ high energy X-ray diffraction microscopy and elastic viscoplastic self-consistent modeling

Leyun Wang et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion

M. G. Jiang et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing

Ningning Liang et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure

C. Xu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unraveling Recrystallization Mechanisms Governing Texture Development from Rare-Earth Element Additions to Magnesium

Aidin Imandoust et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effect of rare earth element segregation on grain boundary energy and mobility in magnesium and ensuing texture weakening

Christopher D. Barrett et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ductility enhancement in Mg-0.2%Ce alloys

R. K. Sabat et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Correlation between dynamic recrystallization and formation of rare earth texture in a Mg-Zn-Gd magnesium alloy during extrusion

M. G. Jiang et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Fabrication of ultra-high strength magnesium alloys over 540 MPa with low alloying concentration by double continuously extrusion

Hua Huang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium-rare earth alloys

Aidin Imandoust et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 1-double twins

Dikai Guan et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimentally quantifying critical stresses associated with basal slip and twinning in magnesium using micropillars

Y. Liu et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The dislocation-twin interaction and evolution of twin boundary in AZ31 Mg alloy

Jing Zhang et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pyramidal I slip in c-axis compressed Mg single crystals

Kelvin Y. Xie et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

The deciding role of texture on ductility in a Ce containing Mg alloy

R. K. Sabat et al.

MATERIALS LETTERS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evolution of microstructure and mechanical properties of Mg-Mn-Ce alloys under hot extrusion

Qingshan Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Texture evolution during cold rolling of dilute Mg alloys

Z. R. Zeng et al.

SCRIPTA MATERIALIA (2015)

添加到收藏夹

Article Chemistry, Physical

Grain growth and texture evolution during annealing in an indirect-extruded Mg-1Gd alloy

W. X. Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crystallographic classification of kink bands in an extruded Mg-Zn-Y alloy using intragranular misorientation axis analysis

Michiaki Yamasaki et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of Solute in the Texture Modification During Hot Deformation of Mg-Rare Earth Alloys

Jason P. Hadorn et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

[0001] Compression response at room temperature of single-crystal magnesium

B. Syed et al.

SCRIPTA MATERIALIA (2012)

添加到收藏夹

Article Chemistry, Physical

Excellent room-temperature ductility and formability of rolled Mg-Gd-Zn alloy sheets

D. Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Editorial Material Chemistry, Physical

Ce-Mg (Cerium-Magnesium)

H. Okamoto

JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sheet texture modification in magnesium-based alloys by selective rare earth alloying

T. Al-Samman et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Distribution Characteristics of In-Grain Misorientation Axes in Cold-Rolled Commercially Pure Titanium and Their Correlation with Active Slip Modes

Y. B. Chun et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microcompression of single-crystal magnesium

Cynthia M. Byer et al.

SCRIPTA MATERIALIA (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling strength and ductility of ultrafine grained BCC and FCC alloys using irreversible thermodynamics

M. Huang et al.

MATERIALS SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

The origin of rare earth texture development in extruded Mg-based alloys and its effect on tensile ductility

N. Stanford et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2 wt%(0.035 at%)Ce

Yasumasa Chino et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues

LP Kubin et al.

SCRIPTA MATERIALIA (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.