4.7 Article

Valorization of ball-milled waste red mud into heterogeneous catalyst as effective peroxymonosulfate activator for tetracycline hydrochloride degradation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Cu-doped Fe2O3 nanoparticles/etched graphite felt as bifunctional cathode for efficient degradation of sulfamethoxazole in the heterogeneous electro-Fenton process

Haiqiang Qi et al.

Summary: Bifunctional electrodes made of etched graphite felt and Cu-Fe2O3 nanoparticles were used in the heterogeneous electro-Fenton process for efficient treatment of antibiotic-containing wastewater. The electrodes exhibited a wide pH range and excellent stability. Hydroxyl radicals were found to play a major role in the degradation of sulfamethoxazole, indicating the potential for advanced treatment of antibiotic-containing wastewater.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Enhanced catalytic sulfamethoxazole degradation via peroxymonosulfate activation over amorphous CoSx@SiO2 nanocages derived from ZIF-67

Fei Wang et al.

Summary: The amorphous CoSx@SiO2 nanocages were successfully synthesized as heterogeneous catalysts, exhibiting high degradation efficiency towards SMX under PMS activation and improved removal efficiency in simulated wastewater containing chloride ions and low-concentration bicarbonate ions. The possible degradation mechanism was proposed based on quantitative analysis of residual substances and sulfate radicals generated in the PMS system.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Insights into the mechanism of enhanced peroxymonosulfate degraded tetracycline using metal organic framework derived carbonyl modified carbon-coated Fe0

Yiqiong Yang et al.

Summary: Tetracycline (TC) degradation in water was successfully achieved using carbonyl-modified carbon-coated Fe0 as an activator for peroxymonosulfate (PMS). The Fe0 continuously activated PMS, while carbon facilitated electron transportation and the carbonyl group on the carbon surface acted as the active site. This study demonstrates the promising potential of this novel material for removing antibiotics from water.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Chemical

Co3O4-MnO2 nanoparticles moored on biochar as a catalyst for activation of peroxymonosulfate to efficiently degrade sulfonamide antibiotics

Zhuo-Rui Jiang et al.

Summary: Co3O4-MnO2/BC, as an activated of PMS, shows efficient performance and superior stability in decomposing soluble sulfonamide antibiotics.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Surface oxygen vacancy and graphene quantum dots co-modified Bi2WO6 toward highly efficient photocatalytic reduction of CO2

Shaofeng Xiong et al.

Summary: This study designed and prepared a surface oxygen vacancy and graphene quantum dots co-modified photocatalyst, which exhibited enhanced conversion of CO2 to CO. By optimizing the catalyst structure, the separation efficiency and fluorescence lifetime of photogenerated electrons were improved.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Chemistry, Physical

Structural tuning of multishelled hollow microspheres for boosted peroxymonosulfate activation and selectivity: Role of surface superoxide radical

Wenqian Li et al.

Summary: A multi-shelled hollow micro-reactor with tunable shell number, thickness and porosity was constructed using nanosized Co3O4 for the catalysis of PMS. Triple-shelled hollow microspheres showed superior catalytic activity and selectivity could be optimized by adjusting shell thickness and porosity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Engineering, Environmental

Insight into the multiple roles of nitrogen doped carbon quantum dots in an ultrathin 2D-0D-2D all-solid-state Z scheme heterostructure and its performance in tetracycline degradation under LED illumination

Utpal Ghosh et al.

Summary: An all-solid-state Z scheme composite with excellent photocatalytic degradation performance and stability has been successfully designed through a single-step hydrothermal treatment.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Electro-enhanced degradation of atrazine via Co-Fe oxide modified graphite felt composite cathode for persulfate activation

Xiuping Sun et al.

Summary: In this study, a modified composite anode achieved efficient PS activation for atrazine degradation. Possible degradation pathways were proposed, providing a feasible strategy for enhancing the degradation of persistent organic pollutants.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Acceleration of levofloxacin degradation by combination of multiple free radicals via MoS2 anchored in manganese ferrite doped perovskite activated PMS under visible light

Yuxuan He et al.

Summary: The nanocomposite of MoS2 embedded manganese ferrite doped perovskite (SrCoO3/MnFe2O4/MoS2) was synthesized for peroxymonosulfate (PMS) activation, showing excellent catalytic performance for levofloxacin (LVF) degradation. The SMM-3 with a mass ratio of 0.3 demonstrated the highest degradation efficiency of 95.1% in 20 minutes. Quenching experiments and EPR analysis revealed that SO4- and HO• played a dominant role in the reaction. The rapid redox cycle of metal ions boosted the PMS activation and promoted the degradation of LVF. DFT calculation and LC-MS/MS analysis revealed the main degradation pathways of LVF. T.E.S.T verified the ecological risks of transformation residues.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Activation of peroxydisulfate by defect-rich CuO nanoparticles supported on layered MgO for organic pollutants degradation: An electron transfer mechanism

Gen Wang et al.

Summary: Activated by layered MgO supported CuO nanoparticles, PDS can efficiently remove organic pollutants. The CuO/MgO hybrid catalysts show excellent catalytic performance and stability in wastewater remediation.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Effects of Molecular Structure on Organic Contaminants' Degradation Efficiency and Dominant ROS in the Advanced Oxidation Process with Multiple ROS

Zhi-Hui Xie et al.

Summary: This study investigates the effects of molecular structure on the degradation efficiencies and dominant reactive oxygen species in advanced oxidation processes. The findings provide insights for improving the practical application of wastewater treatment.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2022)

Article Engineering, Environmental

Sustainably recycling spent lithium-ion batteries to prepare magnetically separable cobalt ferrite for catalytic degradation of bisphenol A via peroxymonosulfate activation

Jianxing Liang et al.

Summary: A selective separation-recovery process based on tuning organic acid was proposed for the resource recycling of spent lithium-ion batteries (LIBs). This process allows for the low-cost preparation of CoFe2O4, reuse of waste acid, and recovery of Li. The prepared CoFe2O4-LIBs exhibit superior performance in the degradation of bisphenol A (BPA) compared to pure CoFe2O4 and other Co-based catalysts.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

B,N-decorated carbocatalyst based on Fe-MOF/BN as an efficient peroxymonosulfate activator for bisphenol A degradation

Yantao Wan et al.

Summary: A novel B,N-decorated carbocatalyst (Fe@BPC-20BN) was prepared by a simple pyrolysis method, showing high catalytic performance in bisphenol A (BPA) degradation. This study provides new insights into the design and preparation of high-efficient B,N-decorated carbocatalysts for environmental remediation.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Chemical

Photocatalysis activation of peroxydisulfate over oxygen vacancies-rich mixed metal oxide derived from red mud-based layered double hydroxide for ciprofloxacin degradation

Qingyong Li et al.

Summary: In this study, a low-cost and oxygen vacancies enriched mixed metal oxide derived from red mud-based layered double hydroxide was used as a peroxydisulfate activator to efficiently degrade ciprofloxacin under visible light irradiation. The optimal composite exhibited good performance, with approximately 87.4% degradation of ciprofloxacin achieved within 60 minutes. The oxygen vacancies in the composite were found to improve light absorption and promote electron-hole separation, resulting in the activation of peroxydisulfate and generation of active species for ciprofloxacin degradation.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Defect-engineered FeSe2_x@C with porous architecture for enhanced peroxymonosulfate-based advanced oxidation processes

Qiang Zhong et al.

Summary: A novel heterogeneous and porous FeSe2_x @C-5 material with abundant Se vacancies (V-se) was synthesized and applied in activating peroxymonosulfate (PMS) for iohexol (IOH) removal. The V-se plays a crucial role in modulating the surface electronic structure and accelerating Fe3+/Fe2+ cycle, leading to enhanced PMS activation efficiency.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Engineering, Environmental

Complete mineralization of phenolic compounds in visible-light-driven photocatalytic ozonation with single-crystal WO3 nanosheets: Performance and mechanism investigation

Haidong Yu et al.

Summary: Complete mineralization of phenolic compounds was achieved using single-crystal WO3 nanosheets-based photocatalytic ozonation under visible light irradiation. The superior catalytic activity of WO3 nanosheets was attributed to their nanosheet morphology and single-crystal microstructure, providing continuous interior channels and enough active sites for surface reactions.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Chemistry, Physical

Photodegradation of tetracycline by asymmetrical zinc(II)phthalocyanines conjugated to cobalt tungstate nanoparticles

Sithi Mgidlana et al.

Summary: This study focused on synthesizing novel asymmetrically tetra-substituted Zn phthalocyanines with a single carboxyl group and different substituents. These compounds were used as photocatalysts and showed good photophysical and photochemical properties, demonstrating efficient degradation of tetracycline in water. Complex 1 exhibited the highest activity for the photodegradation of tetracycline.

JOURNAL OF MOLECULAR STRUCTURE (2022)

Article Engineering, Environmental

Peracetic acid activation by mechanochemically sulfidated zero valent iron for micropollutants degradation: Enhancement mechanism and strategy for extending applicability

Meng-Fan He et al.

Summary: Mechanically sulfidated microscale zero valent iron was found to effectively activate peracetic acid for rapid degradation of multiple micropollutants under neutral conditions. The presence of sulfides enhanced the generation of Fe(II) and promoted PAA activation over multiple cycles. Co-existence of Fe(III) dramatically improved contaminants removal efficiency and enhanced system tolerance to water matrix in the S-ZVI/PAA system.

WATER RESEARCH (2022)

Article Engineering, Chemical

Breaking rate-limiting steps in a red mud-sewage sludge carbon catalyst activated peroxymonosulfate system: Effect of pyrolysis temperature

Lan Liang et al.

Summary: By mixing red mud with sewage sludge and subjecting it to pyrolysis, the active sites on the surface of biochar can be increased, thereby improving its catalytic activity. The carbon-based catalysts prepared at different pyrolysis temperatures were effective in activating peroxymonosulfate for sulfamethoxazole degradation, leading to improved wastewater treatment.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Chemical

Breaking rate-limiting steps in a red mud-sewage sludge carbon catalyst activated peroxymonosulfate system: Effect of pyrolysis temperature

Lan Liang et al.

Summary: By increasing the pyrolysis temperature, the rate-limiting step of the RSDBC-500/PMS system can be broken, leading to an improvement in SMX degradation efficiency. The elevation of temperature facilitates PMS activation and active species production.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Environmental

Visible light degradation of tetracycline using oxygen-rich titanium dioxide nanosheets decorated by carbon quantum dots

Xinghao Liu et al.

Summary: A novel composite material CQD-OTNs was synthesized and applied for the photo-degradation of TC, showing significantly enhanced degradation efficiency compared to pure titanium dioxide nanosheets. The improved photocatalytic activity of CQD-OTNs was attributed to the constructed oxygen enriched structure and CQDs, leading to the effective separation of electron-hole pairs and enhanced degradation of TC with generated hydroxyl and superoxide radicals.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Peroxydisulfate Activation and Singlet Oxygen Generation by Oxygen Vacancy for Degradation of Contaminants

Yongguang Bu et al.

Summary: This study presents a mechanism of PDS activation over OV-rich BiOBr samples, where a nonradical mechanism mediated by O-1(2) is utilized for BPA degradation. The surface OVs of BiOBr provide ideal sites for the inclusion of hydroxyl ions, leading to the formation of Bi-III-OH species that act as active sites for PDS activation. This work offers a novel perspective for the activation of peroxides by defective materials without additional energy supply or aqueous transition metal ions.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Engineering, Environmental

Novel step-scheme red mud based Ag3PO4 heterojunction photocatalyst with enhanced photocatalytic performance and stability in photo-Fenton reaction

Qingyong Li et al.

Summary: This study successfully prepared a new Ag3PO4/RM composite using red mud as a host material for the growth of silver phosphate, exhibiting remarkable photocatalytic activity, stability, and reusability for the degradation of TC-HCl in photo-Fenton reaction. The S-scheme charge transfer in APRM-110 accelerated the separation of photo-generated carriers, effectively restraining photocorrosion.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Molten salt-assisted synthesis of Ce4O7/Bi4MoO9 heterojunction photocatalysts for Photo-Fenton degradation of tetracycline: Enhanced mechanism, degradation pathway and products toxicity assessment

Gui Yang et al.

Summary: Photo-Fenton as an advanced oxidation technology has been proven to be a multifunctional strategy for environmental remediation. In this study, a novel Ce4O7 modified Bi4MoO9 (C-BMO) Photo-Fenton heterojunction catalyst with in-built dual redox centers was successfully synthesized. The catalyst exhibited significantly enhanced degradation rate for tetracycline compared to pristine Bi4MoO9 and Ce4O7, mainly due to the formation of an intimate interface for efficient carrier transfer.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Engineering, Environmental

Iron-based catalysts for persulfate-based advanced oxidation process: Microstructure, property and tailoring

Guoqing Zhao et al.

Summary: Sulfate radicals (SO4 center dot- )-based advanced oxidation processes have gained significant attention for their high catalytic activity in treating water pollutants. The combination of iron-based materials with peroxymonosulfate (PMS) or persulfate (PS) is an effective way to generate reactive sulfate radicals. The analysis of different heterogeneous iron-based catalysts for PMS or PS activation provides insights into their microstructure, electrical properties, and the effects of various engineering approaches on activation.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Environmental Sciences

Alkylpolyglycoside modified MnFe2O4 with abundant oxygen vacancies boosting singlet oxygen dominated peroxymonosulfate activation for organic pollutants degradation

Rui Zhou et al.

Summary: The novel APG@MnFe2O4 nanocomposite effectively degraded 2,4-DCP as a PMS activator, exhibiting a faster reaction rate, higher degradation efficiency, and superior cyclic stability.

CHEMOSPHERE (2021)

Article Engineering, Environmental

Metal-free black-red phosphorus as an efficient heterogeneous reductant to boost Fe3+/Fe2+ cycle for peroxymonosulfate activation

Hongyu Zhou et al.

Summary: By preparing red phosphorus into black-red phosphorus and applying it in the Fe2+ / PMS process, the contaminant degradation performance was improved and the radical quenching reaction was avoided, showing superior recyclability and resistance. Multiple PMS dosages can alleviate side-reactions and enhance PMS utilization efficiency, while moderate increase in Fe3+ concentration can reduce by-product formation.

WATER RESEARCH (2021)

Review Engineering, Environmental

Characteristic, hazard and iron recovery technology of red mud-A critical review

Xiao Liu et al.

Summary: This paper systematically reviews the iron recovery methods for high-iron RM, dividing them into physical separation, pyrometallurgy (reduction smelting and reduction roasting), and hydrometallurgy (acid leaching). The basic principles and effects of these technologies are summarized, as well as the advantages and disadvantages. Feasibility and economic cost are identified as main factors restricting industrial application.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Engineering, Environmental

A review of the recent advances on the treatment of industrial wastewaters by Sulfate Radical-based Advanced Oxidation Processes (SR-AOPs)

Stefanos Giannakis et al.

Summary: SR-AOPs have gained significant attention in recent years for their versatility and efficacy in disinfection and decontamination. These processes, which generate sulfate radicals or sulfate and hydroxyl radicals, have been successfully applied in the treatment of various industrial wastewater, providing a potential solution for better wastewater treatment practices.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Environmental Sciences

Iron-based persulfate activation process for environmental decontamination in water and soil

Ansaf Karim et al.

Summary: This review summarizes the application of different iron-activated persulfate systems in removing organic pollutants and metals in water and soil, discusses the chemistry behind the activation of persulfate by iron-based materials, and explores the ability of this system to reduce metal presence in soil and wastewater.

CHEMOSPHERE (2021)

Article Engineering, Environmental

Silicate-Enhanced Heterogeneous Flow-Through Electro-Fenton System Using Iron Oxides under Nanoconfinement

Dongli Guo et al.

Summary: A silicate-enhanced flow-through electro-Fenton system with a nanoconfined catalyst was designed and demonstrated for efficient, rapid, and selective degradation of antibiotic tetracycline. The system utilized Fe2O3 nanoparticle filled carbon nanotube filter to generate in situ H2O2 and convert it to reactive oxygen species for degradation. The presence of silicate electrolyte significantly boosted H2O2 yield and the flow-through configuration offered improved degradation kinetics compared to conventional batch reactors.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Improving the catalytic activity of bentonite-based bismuth ferrites composite via mechanical activation for photo-Fenton process

Guangtao Wei et al.

Summary: The study focused on activating BiFe/Bent composite through mechanical activation, leading to improved catalytic activity and changes in physicochemical properties. The main reasons for enhanced catalytic activity of the activated composite were attributed to changes in microstructure. Mechanical activation was identified as a strategy to promote catalytic efficiency of the composite material.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Chemistry, Multidisciplinary

Ultrastable and Efficient Visible-light-driven CO2 Reduction Triggered by Regenerative Oxygen-Vacancies in Bi2O2CO3 Nanosheets

Xiaolong Zu et al.

Summary: A fast low-pressure ultraviolet light irradiation strategy was designed to regenerate nearly equivalent surface vacancies on defective Bi2O2CO3 nanosheets, leading to improved stability and evolution rate for visible-light-driven CO2 reduction to CO.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Kirkendall Effect Boosts Phosphorylated nZVI for Efficient Heavy Metal Wastewater Treatment

Meiqi Li et al.

Summary: The study demonstrates that phosphorylated nanoscale zero-valent iron shows promising results in removing heavy metals from wastewater. Phosphorylation of nZVI leads to the generation of radial nanocracks, which facilitate the removal of heavy metals. This technology could be effective in treating electroplating factory wastewater and meeting local discharge regulations.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Engineering, Environmental

Efficient photocatalytic degradation of tetracycline under visible light by Z-scheme Ag3PO4/mixed-valence MIL-88A(Fe) heterojunctions: Mechanism insight, degradation pathways and DFT calculation

Zhenfei Yang et al.

Summary: In this study, Ag3PO4/mixed-valence MIL-88A(Fe) [AMM] Z-scheme heterojunctions with an in-situ-generated photo-Fenton process were successfully constructed, showing improved photocatalytic activity. The Z-scheme transfer pathway accelerated charge carrier transport and inhibited photocorrosion, leading to enhanced photocatalytic performance. The FeII/FeIII ratio adjustment of mixed-valence MIL-88A(Fe) further increased the photocatalytic activity, benefiting from the efficiency of the in-situ-generated photo-Fenton process.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Engineering, Environmental

Applications of red mud as an environmental remediation material: A review

Mengfan Wang et al.

Summary: Red mud is an alkaline by-product from alumina plants, and various waste treatment methods utilizing red mud as an environmental remediation material have been developed. RM-ERMs can be used for purifying waste water, waste gas, and soil, providing an opportunity to improve the environment through purification technologies.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Physical

Oxygen vacancy on hollow sphere CuFe2O4 as an efficient Fenton-like catalysis for organic pollutant degradation over a wide pH range

Rong-Rong Ding et al.

Summary: A novel heterogeneous Fenton-like catalyst, HS-CuFe2O4-sigma, was designed in this study to efficiently remove the pollutant ciprofloxacin. The efficient catalytic performance of HS-CuFe2O4-sigma is attributed to the synergistic effect of oxygen vacancies and the nanoconfinement of the catalyst's special hollow structure.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Engineering, Environmental

S-doping α-Fe2O3 induced efficient electron-hole separation for enhanced persulfate activation toward carbamazepine oxidation: Experimental and DFT study

Jing Deng et al.

Summary: Sulfur-doped alpha-Fe2O3 has been successfully synthesized and applied in activating persulfate for carbamazepine degradation under UV irradiation, showing significantly enhanced photocatalytic performance. The introduction of water matrix species exerted different effects on CBZ degradation, and the degradation process involved the generation of various radicals leading to the destruction of CBZ molecules through hydroxylation, deamination, and subsequent reactions according to HPLC-MS and DFT analysis.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Environmental Sciences

Synthesis, characterization and utilization of oxygen vacancy contained metal oxide semiconductors for energy and environmental catalysis

Hongjie Liu et al.

Summary: Developing novel functional materials with promising properties for enhancing energy conversion and lowering catalytic reaction barriers is essential. Metal oxide semiconductors with defects, particularly oxygen vacancies, have shown improved catalytic performance and have been widely applied in various catalysis fields.

CHEMOSPHERE (2021)

Article Green & Sustainable Science & Technology

Toxicity changes of wastewater during various advanced oxidation processes treatment: An overview

Jianlong Wang et al.

Summary: This review focuses on the toxicity changes of wastewater during various AOPs treatment, including assessment methods such as acute toxicity, genetic toxicity, estrogenic activity, immunity toxicity, and endocrine disrupting effects. It also introduces toxicity prediction by computational simulation and strategies for eliminating toxicity of wastewater after AOPs treatment.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Ball milling biochar iron oxide composites for the removal of chromium (Cr (VI)) from water: Performance and mechanisms

Haowen Zou et al.

Summary: A novel biochar/iron oxide composite was successfully prepared by ball milling iron-laden biochar, showing fast kinetics and large adsorption capacity for Cr(VI) removal. The composite performed well under acidic pH conditions, but the presence of competition ions inhibited the removal efficiency.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

New insights into ball milling effects on MgAl-LDHs exfoliation on biochar support: A case study for cadmium adsorption

Shihao Cui et al.

Summary: Ball milling was used to fabricate a B-LDHs-BC composite with enhanced Cd(II) adsorption capacity, due to the exfoliation of LDHs on the BC surface. The BM effects induced more acidic functional groups and active adsorption sites, leading to improved performance of B-LDHs-BC in Cd(II) removal. This study demonstrated a solvent-free method for producing exfoliated LDHs modified BC composites, showing potential for practical applications in the environment.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Multidisciplinary

Peroxymonosulfate activation by tea residue biochar loaded with Fe3O4 for the degradation of tetracycline hydrochloride: performance and reaction mechanism

Qirui Wang et al.

Summary: The recycling of agricultural and food waste is an effective way to reduce resource waste and ameliorate the shortage of natural resources. The study successfully prepared a heterogeneous catalyst (Fe3O4@T-BC) using waste tea residue and demonstrated its efficiency in degrading tetracycline hydrochloride. Under suitable conditions, the Fe3O4@T-BC catalyst could achieve a high degradation rate of TCH.

RSC ADVANCES (2021)

Article Engineering, Environmental

Effects of ball milling on the photochemistry of biochar: Enrofloxacin degradation and possible mechanisms

Yao Xiao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Green & Sustainable Science & Technology

MIL-53(Fe)-derived Fe2O3 with oxygen vacancy as Fenton-like photocatalysts for the elimination of toxic organics in wastewater

Jie Zan et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Engineering, Environmental

Application of modified red mud in environmentally-benign applications: A review paper

Collin G. Joseph et al.

ENVIRONMENTAL ENGINEERING RESEARCH (2020)

Article Environmental Sciences

Environmental risks and mechanical evaluation of recycling red mud in bricks

F. Arroyo et al.

ENVIRONMENTAL RESEARCH (2020)

Article Engineering, Environmental

Mechanochemical synthesis of Fe2O3/Zn-Al layered double hydroxide based on red mud

Qingyong Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Agricultural Engineering

Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials

Manish Kumar et al.

BIORESOURCE TECHNOLOGY (2020)

Article Environmental Sciences

Persulfate activation by modified red mud for the oxidation of antibiotic sulfamethoxazole in water

Alexandra Ioannidi et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)

Article Green & Sustainable Science & Technology

Recent advances in mechanochemical production of chemicals and carbon materials from sustainable biomass resources

Feng Shen et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Review Engineering, Environmental

The composition, recycling and utilisation of Bayer red mud

M. A. Khairul et al.

RESOURCES CONSERVATION AND RECYCLING (2019)

Review Environmental Sciences

A review on the potential uses of red mud as amendment for pollution control in environmental media

Mehwish Taneez et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Multidisciplinary Sciences

High-surface-area corundum by mechanochemically induced phase transformation of boehmite

Amol P. Amrute et al.

SCIENCE (2019)

Article Green & Sustainable Science & Technology

Green synthesis of red mud based ZnO-Fe2O3 composite used for photo-Fenton reaction under visible light

Yunshang Li et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Review Engineering, Environmental

Activation of persulfate (PS) and peroxymonosulfate (PMS) and application for the degradation of emerging contaminants

Jianlong Wang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Review Environmental Sciences

Antibiotics and antibiotic resistance genes in global lakes: A review and meta-analysis

Yuyi Yang et al.

ENVIRONMENT INTERNATIONAL (2018)

Article Engineering, Environmental

Utilization of raw red mud as a source of iron activating the persulfate oxidation of paraben

Vasiliki Matthaiou et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Article Environmental Sciences

Influence of livestock activities on residue antibiotic levels of rivers in Hong Kong

Ammaiyappan Selvam et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)

Article Engineering, Chemical

XPS study on the mechanism of starch-hematite surface chemical complexation

Gabriela F. Moreira et al.

MINERALS ENGINEERING (2017)

Article Engineering, Environmental

Activation of Peroxymonosulfate by Benzoquinone: A Novel Nonradical Oxidation Process

Yang Zhou et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Article Chemistry, Physical

Biphasic oxidation reactions promoted by amphiphilic catalysts based on red mud residue

A. A. S. Oliveira et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2014)