Application of the hybrid electrocoagulation-electrooxidation process for the degradation of contaminants in acidified biodiesel wastewater

In this study, the treatment of biodiesel production wastewater by the hybrid Electrocoagulation (EC) -Electrooxidation (EO) processes was investigated. Before the hybrid process, biodiesel production wastewater was acidified using H2SO4 and HCl at different pH values. The highest pollutant removal efficiency was achieved at pH 6 using HCl. The chemical oxygen demand (COD), total suspended solids (TSS), and oil-grease removal efficiency were 67.2 %, 65.7 %, and 56.9 % after the acidifying of the wastewater. After the applica-tion of the acidification technique, the operating conditions of the EC and EO processes were optimized, then the hybrid EC-EO process was applied. Different electrodes were evaluated and the Al-Al electrode pair was chosen for the EC process while Ti/SnO2 anode was chosen for the EO process. Optimum operational condi-tions for the EC process were 0.25 A and 60 min whereas 0.5 A and 150 min for the EO process while pH was kept as the outlet of the acidification. The COD, TSS, and oil-grease removal efficiency of the hybrid ECopt-EOopt process was 98.9, 98.2, and 99.8 %, respectively. The specific energy consumption of the EC, EO, and hybrid EC-EO processes at optimized conditions were 1.02, 43.4, and 37.4 kWh/kg CODremoved, respec-tively. The hybrid process has a higher removal efficiency than either the EC or EO procedures alone, while it uses less energy than the EO process. The hybrid EC-EO procedure, is an effective treatment method for acid-ified biodiesel wastewater, according to the results of the study.

Automated summary

This study investigated the treatment of biodiesel production wastewater through the hybrid Electrocoagulation-Electrooxidation processes. By optimizing operational conditions, selecting appropriate electrodes, and maintaining the pH value after acidification, a higher pollutant removal efficiency was achieved.