4.6 Article

Improve the interfacial properties of carbon fiber reinforced epoxy resin composites by maleimide-modified waterborne polyurethane sizing agent

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Composites

Investigation on the mechanical properties of ramie/kenaf fibers under various parameters using GRA and TOPSIS methods

Saikrishnan Ganesh et al.

Summary: This study aimed to optimize the mechanical performance of ramie and kenaf fibers in epoxy composites developed using the hand layup technique, with the conclusion that composites with 10wt% ramie, 10wt% kenaf, and 5wt% benzoyl chloride treatment exhibit good mechanical properties.

POLYMER COMPOSITES (2022)

Article Materials Science, Textiles

The influence of different parameters in tribological characteristics of pineapple/sisal/TiO2 filler incorporation

K. R. Sumesh et al.

Summary: The utilization of SP fiber reinforcement and TiO2 filler in the hybrid composites showed improved mechanical properties such as flexural, impact, and tensile strength, with lower Specific Wear Rate achieved through Taguchi optimization. Moreover, the influence of SP fiber on overall tribological properties was found to be the highest, followed by the filler incorporation.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Article Mechanics

Effect of CNTs deposition on carbon fiber followed by amination on the interfacial properties of epoxy composites

Zhiqiang Yao et al.

Summary: Depositing a thin layer of carbon nanotubes on the surface of carbon fibers through chemical vapor deposition and subsequently aminating them can significantly enhance the interfacial properties and bonding strength of carbon fiber/epoxy composites.

COMPOSITE STRUCTURES (2022)

Article Materials Science, Composites

Synthesis of hyperbranched polyurethane sizing agent with high-solid content via self-catalytic method for improving interfacial adhesion of CF/ PA6 composites

Longxuan Gao et al.

Summary: A hyperbranched waterborne polyurethane sizing agent with high-solid content was designed to improve the interfacial adhesion of carbon fiber/polyamide-6 composites. By controlling the sizing agent concentration, the interlaminar shear strength and flexural strength of the composites were effectively increased. The preparation of this sizing agent is simple and environmentally friendly, which may reduce transportation costs.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Article Materials Science, Composites

Waterborne epoxy sizing agent with hyperbranched structure to improve the interface performance of carbon fiber

Yifan Chen et al.

Summary: The hyperbranched structure of hydroxyl-terminated epoxy resin is modified to obtain waterborne epoxy resin, which can enhance the preparation efficiency and interface adhesion strength of CF sizing agent without sacrificing the tensile strength of CF single fiber. This sizing agent shows a broad application prospect in the composite materials field.

POLYMER COMPOSITES (2021)

Article Materials Science, Composites

A novel hyperbranched polyurethane/nTiO2 waterborne sizing agent for improving UV-resistance and interfacial properties of SCF/PA6 composites

Lanqing Fang et al.

Summary: A novel UV-resistant hyperbranched polyurethane was designed for waterborne sizing agents, resulting in improved interfacial adhesion and mechanical properties of short carbon fiber/polyamide6 composites. The mechanical properties of the composites remained about 99% after a week of UV aging treatment, indicating excellent UV resistance of the sizing agent.

COMPOSITES COMMUNICATIONS (2021)

Article Materials Science, Composites

Growing carbon nanotubes on continuous carbon fibers to produce composites with improved interfacial properties: A step towards commercial production and application

Jianjie Qin et al.

Summary: A scalable manufacturing process has been developed to grow carbon nanotubes in situ on the surface of continuous carbon fibers and achieve their uniform distribution. The successful repair of damage caused by catalyst reduction in the chemical vapor deposition process led to an improvement in the average tensile strength of the CNTs/CF reinforcement. Additionally, the growth of CNTs on fiber surfaces improved the interfacial shear strength of composite materials, ultimately enabling industrialization of composite reinforcement preparation.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Synthesis and Properties of Waterborne Polyurethane Modified with Guar Gum Polysaccharide

Jianzhong Ma et al.

CHEMISTRYSELECT (2020)

Article Materials Science, Composites

Fracture investigation of functionalized carbon nanotubes-grown carbon fiber fabrics/epoxy composites

Zhiqiang Yao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Manufacturing

Hybrid polyurethane and silane sized carbon fibre/epoxy composites with enhanced impact resistance

Lihe Mao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Materials Science, Multidisciplinary

Tensile properties of CNTs-grown carbon fiber fabrics prepared using Fe-Co bimetallic catalysts at low temperature

Zhiqiang Yao et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Chemistry, Physical

Fe3O4/graphene modified waterborne polyimide sizing agent for high modulus carbon fiber

Ruiting Hao et al.

APPLIED SURFACE SCIENCE (2019)

Article Polymer Science

Eugenol-based thermally stable thermosets by Alder-ene reaction: From synthesis to thermal degradation

Melanie Decostanzi et al.

EUROPEAN POLYMER JOURNAL (2019)

Article Engineering, Multidisciplinary

Novel carbon-fibre powder-epoxy composites: Interface phenomena and interlaminar fracture behaviour

Dimitrios Mamalis et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Materials Science, Composites

Interfacial microstructure and mechanical properties of carbon fiber composite modified with carbon dots

Caixia Chu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Engineering, Manufacturing

Improving interfacial properties of hierarchical reinforcement carbon fibers modified by graphene oxide with different bonding types

Liu Liu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Article Engineering, Manufacturing

Micro-configuration controlled interfacial adhesion by grafting graphene oxide onto carbon fibers

Xiaomin Yuan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Article Materials Science, Textiles

Si-Al Hybrid Effect of Waterborne Polyurethane Hybrid Sizing Agent for Carbon Fiber/PA6 Composites

Yongzhen Zhao et al.

FIBERS AND POLYMERS (2017)

Article Materials Science, Composites

Effect of surface silanization of carbon fiber on mechanical properties of carbon fiber reinforced polyurethane composites

Shuai Jiang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2015)

Article Chemistry, Physical

Self-healable interfaces based on thermo-reversible Diels-Alder reactions in carbon fiber reinforced composites

W. Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)

Article Polymer Science

Chemical interaction between carbon fibers and surface sizing

Zhishuang Dai et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Article Polymer Science

Recent Progress in Fabrication, Structure, and Properties of Carbon Fibers

Yaodong Liu et al.

Polymer Reviews (2012)