4.7 Article

High-strength and energetic Al2Ti6Zr2Nb3Ta3 high entropy alloy containing a cuboidal BCC/B2 coherent microstructure

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Coherent precipitation and stability of cuboidal nanoparticles in body-centered-cubic Al0.4Nb0.5Ta0.5TiZr0.8 refractory high entropy alloy

Qing Wang et al.

Summary: A new body-centered-cubic (BCC)-based refractory high entropy alloy was developed, with coherent precipitation observed. Cuboidal nanoprecipitates were formed in an 873 K-aged alloy, with a moderate lattice misfit. The coexistence of B2 and Zr5Al3 phases was found, with deteriorated coherency observed at higher aging temperatures. Segregations of Nb/Ta and Ti/Zr led to the presence of two kinds of BCC phases.

SCRIPTA MATERIALIA (2021)

Article Chemistry, Multidisciplinary

A Novel Soft-Magnetic B2-Based Multiprincipal-Element Alloy with a Uniform Distribution of Coherent Body-Centered-Cubic Nanoprecipitates

Yue Ma et al.

Summary: The novel soft-magnetic alloy Al1.5Co4Fe2Cr exhibits high saturation magnetization, low coercivity, high Curie temperature, and high electrical resistivity, making it promising for soft magnets. The excellent stability of the coherent microstructure enables the retention of these prominent soft-magnetic properties even after thermal exposure at high temperatures.

ADVANCED MATERIALS (2021)

Article Materials Science, Multidisciplinary

Precipitation and micromechanical behavior of the coherent ordered nanoprecipitation strengthened Al-Cr-Fe-Ni-V high entropy alloy

Linjing Wang et al.

Summary: Coherent ordered nanoprecipitation (CON) hardening is an effective strategy for overcoming the strength-ductility trade-off in alloys. Understanding the precipitation mechanisms and their effects on mechanical properties is crucial for optimizing CON-strengthened materials. In this study, the precipitation and mechanical behavior of FCC/L1(2) spinodal nanostructure and BCC phase in a newly developed CON-strengthened high entropy alloy were investigated, revealing the impact of pre-deformation on composition redistribution and phase strengthening.

ACTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Coherent precipitation and stability of cuboidal B2 nanoparticles in a ferritic Fe-Cr-Ni-Al superalloy

Zhenhua Wang et al.

Summary: The Fe-based superalloy developed in this study shows high microstructural stability and remarkable mechanical properties at 973 K, attributed to the moderate lattice misfit between B2 nanoparticles and BCC matrix.

MATERIALS RESEARCH LETTERS (2021)

Review Chemistry, Physical

High-entropy alloys: emerging materials for advanced functional applications

Xin Wang et al.

Summary: High-entropy alloys (HEAs) have attracted attention in various fields due to their unique concept and properties, such as impressive mechanical properties like excellent strength, unforgettable corrosion resistance, and superior thermostability. With exceptional synthesis methods, HEAs surprisingly offer numerous energy and environmental applications, promising a bright future.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

Phase inversion in a two-phase, BCC+B2, refractory high entropy alloy

V. Soni et al.

ACTA MATERIALIA (2020)

Article Multidisciplinary Sciences

Snoek-type damping performance in strong and ductile high-entropy alloys

Zhifeng Lei et al.

SCIENCE ADVANCES (2020)

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

Review Materials Science, Multidisciplinary

L1(2)-strengthened high-entropy alloys for advanced structural applications

Tao Yang et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Article Materials Science, Multidisciplinary

Phase stability as a function of temperature in a refractory high-entropy alloy

Vishal Soni et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Article Nanoscience & Nanotechnology

Microstructures and mechanical properties of body-centered-cubic (Al, Ti)(0.7)(Ni,Co,Fe,Cr)(5) high entropy alloys with coherent B2/L2(1) nanoprecipitation

Chunling Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Chemistry, Physical

Diffusion-defining atomic-scale spinodal decomposition within nanoprecipitates

Angelina Orthacker et al.

NATURE MATERIALS (2018)

Article Nanoscience & Nanotechnology

Structure and mechanical properties of B2 ordered refractory AlNbTiVZrx (x=0-1.5) high-entropy alloys

N. Yu. Yurchenko et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Materials Science, Multidisciplinary

Microstructure, mechanical properties and energetic characteristics of a novel high-entropy alloy HfZrTiTa0.53

Zhouran Zhang et al.

MATERIALS & DESIGN (2017)

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

Article Metallurgy & Metallurgical Engineering

Oxidation Behavior of the CrMnFeCoNi High-Entropy Alloy

G. Laplanche et al.

OXIDATION OF METALS (2016)

Article Computer Science, Interdisciplinary Applications

First-principles investigations on the phase stability, elastic and thermodynamic properties of Zr-Al alloys

Leini Wang et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2015)

Article Chemistry, Physical

Structure and mechanical properties of the AlCrxNbTiV (x=0, 0.5, 1, 1.5) high entropy alloys

N. D. Stepanov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Physics, Applied

High-entropy alloys as high-temperature thermoelectric materials

Samrand Shafeie et al.

JOURNAL OF APPLIED PHYSICS (2015)

Article Materials Science, Multidisciplinary

Three-dimensional characterisation of the microstructure of an high entropy alloy using STEM/HAADF tomography

J. M. Sosa et al.

MATERIALS SCIENCE AND TECHNOLOGY (2015)

Article Materials Science, Multidisciplinary

Microstructure and Properties of Aluminum-Containing Refractory High-Entropy Alloys

O. N. Senkov et al.

Article Nanoscience & Nanotechnology

Creep deformation of a sixth generation Ni-base single crystal superalloy at 800°C

Y. Yuan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Materials Science, Multidisciplinary

Irradiation Resistance of Multicomponent Alloys

T. Egami et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)

Article Materials Science, Multidisciplinary

Ostwald ripening in multicomponent alloys

T. Philippe et al.

ACTA MATERIALIA (2013)

Article Materials Science, Multidisciplinary

Pitting corrosion of the high-entropy alloy Co1.5CrFeNi1.5Ti0.5Mo0.1 in chloride-containing sulphate solutions

Y. L. Chou et al.

CORROSION SCIENCE (2010)

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Article Materials Science, Multidisciplinary

Creep behaviour of Ni-base single-crystal superalloys with various γ′ volume fraction

T Murakumo et al.

ACTA MATERIALIA (2004)

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)