相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Investigation on improved micro-formability and forming mechanism under high strain rate of H62 brass in pulsed current-assisted laser impact micro-forming
Yuhao Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Constitutive modeling of flow stress and work hardening behavior while considering dynamic strain aging
Han Chen et al.
MATERIALIA (2021)
Effects of electric current on the plastic deformation behavior of pure copper, iron, and titanium
C. Rudolf et al.
ACTA MATERIALIA (2021)
Rapidly modifying microstructure and mechanical properties of AA7150 Al alloy processed with electropulsing treatment
Kai Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Effect of electropulsing on the fatigue resistance of aluminium alloy 2014-T6
A. Babutskyi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Achieving outstanding combination of strength and ductility of the Al-Mg-Li alloy by cold rolling combined with electropulsing assisted treatment
Han Xiao et al.
MATERIALS & DESIGN (2020)
Experimental study on surface integrity of ultra-high-strength steel by ultrasonic hot rolling surface strengthening
Xiaosheng Luan et al.
SURFACE & COATINGS TECHNOLOGY (2020)
The effect of electropulsing-assisted ultrasonic nanocrystal surface modification on the microstructure and properties of 300M steel
Weidong Zhao et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Electrical discharge-assisted milling for machining titanium alloy
Changping Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
The coordination behaviors of alpha and beta phases with different grain sizes in Ti-6Al-4V subjected to surface severe plastic deformation
Y. G. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructural effects of Ti6Al4V alloys modified by electropulsing treatment on ultraprecision diamond turning
Zejia Zhao et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Improving plasticity of metallic glass by electropulsing-assisted surface severe plastic deformation
Chi Ma et al.
MATERIALS & DESIGN (2019)
Electroplasticity in AZ31B subjected to short-duration high-frequency pulsed current
Jingyi Zhao et al.
JOURNAL OF APPLIED PHYSICS (2019)
Microstructure evolution and electroplasticity in Ti64 subjected to electropulsing-assisted laser shock peening
Hao Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Gradient nanostructure evolution and phase transformation of α phase in Ti-6Al-4V alloy induced by ultrasonic surface rolling process
Ni Ao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of electropulsing on the machinability and microstructure of GH4169 superalloy during turning process
Z. Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Effect of ultrasonic nanocrystal surface modification on elevated temperature residual stress, microstructure, and fatigue behavior of ATI 718Plus alloy
Micheal Kattoura et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Efficient fabrication of gradient nanostructure layer on surface of commercial pure copper by coupling electric pulse and ultrasonics treatment
Renjie Ji et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of Electropulsing-Assisted Ultrasonic Nanocrystalline Surface Modification on the Surface Mechanical Properties and Microstructure of Ti-6Al-4V Alloy
Yongda Ye et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Experimental investigation into the electropulsing assisted punching process of 2024T4 aluminum alloy sheet
Zejun Tang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Face-centered titanium induced by ultrasonic surface rolling process in Ti-6Al-4V alloy and its tensile behavior
Ni Ao et al.
MATERIALS CHARACTERIZATION (2018)
Surface nanocrystallization by ultrasonic nano-crystal surface modification and its effect on gas nitriding of Ti6A14V alloy
Jun Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Electrically Assisted Ultrasonic Nanocrystal Surface Modification of Ti6Al4V Alloy
Jun Liu et al.
ADVANCED ENGINEERING MATERIALS (2018)
Constitutive analysis of electrically-assisted tensile deformation of CP-Ti based on non-uniform thermal expansion, plastic softening and dynamic strain aging
Taekyung Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Local heat treatment with and without ultrasonic nanocrystal surface modification of Ti-6A1-4V alloy: Mechanical and tribological properties
Auezhan Amanov et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Nanostructured β-type titanium alloy fabricated by ultrasonic nanocrystal surface modification
Mehdi Kheradmandfard et al.
ULTRASONICS SONOCHEMISTRY (2017)
Microstructure evolution and mechanical behavior of ultrafine Ti-6Al-4V during low-temperature superplastic deformation
S. V. Zherebtsov et al.
ACTA MATERIALIA (2016)
Evolution of surface mechanical properties and microstructure of Ti-6Al-4V alloy induced by electropulsing-assisted ultrasonic surface rolling process
Haibo Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Warm laser shock peening without coating induced phase transformations and pinning effect on fatigue life of low-alloy steel
S. Prabhakaran et al.
MATERIALS & DESIGN (2016)
Enhancement of process capabilities in electrically-assisted double sided incremental forming
D. K. Xu et al.
MATERIALS & DESIGN (2016)
Enhanced rollability of Mg-3Al-1Zn alloy by pulsed electric current: a comparative study
Jie Kuang et al.
MATERIALS & DESIGN (2016)
Improved mechanical properties of Mg-9Al-1Zn alloy by the combination of aging, cold-rolling and electropulsing treatment
Yanbin Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of electroplastic cutting on the manufacturing process and surface properties
Antonio J. Sanchez Egea et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Study on electropulsing assisted turning process for AISI 304 stainless steel
H. Wang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Numerical Simulation of the Pulse Current Treatment of Cutting Hard-Alloy Plates
N. Ya. Opravkhata
STRENGTH OF MATERIALS (2015)
A Review of Electrically-Assisted Manufacturing
Huu-Duc Nguyen-Tran et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2015)
Electroplasticity-assisted bottom bending process
Antonio J. Sanchez Egea et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility
Chang Ye et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Ultrahigh dense and gradient nano-precipitates generated by warm laser shock peening for combination of high strength and ductility
Chang Ye et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Electrically-Assisted Forming of Magnesium AZ31: Effect of Current Magnitude and Deformation Rate on Forgeability
Joshua J. Jones et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening
Chang Ye et al.
ACTA MATERIALIA (2011)
Several Factors Affecting the Electroplastic Effect During an Electrically-Assisted Forming Process
Wesley A. Salandro et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Electroplastic Modeling of Bending Stainless Steel Sheet Metal Using Energy Methods
Wesley A. Salandro et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Effect of thermo-electropulsing rolling on mechanical properties and microstructure of AZ31 magnesium alloy
Haoming Liao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg-9Al-1Zn alloy strip
Yanbin Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Research of electroplastic rolling of AZ31 Mg alloy strip
Zhuohui Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Effect of processing temperature on warm shot peening of spring steel
Y Harada et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Magnetoplastic effects in crystals in the context of spin-dependent chemical kinetics
YI Golovin
CRYSTALLOGRAPHY REPORTS (2004)
Magnetoplastic effects in solids
YI Golovin
PHYSICS OF THE SOLID STATE (2004)
Theoretical basis for electro- and magnetoplasticity
MI Molotskii
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Electroplasticity in metals and ceramics
H Conrad
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)