☆ 4.7 Article

CeO2 nanoparticles decorated CMK-3 as high-performance sulfur host for Li-S batteries

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Multidisciplinary

Customized Structure Design and Functional Mechanism Analysis of Carbon Spheres for Advanced Lithium-Sulfur Batteries

Junbao Kang et al.

Summary: This review article summarizes the recent advances of carbon spheres (CSs) in high-energy lithium-sulfur batteries (LSBs), including their applications in inhibiting the shuttle effect of lithium polysulfides (LiPSs) and protecting lithium anodes. The unique restriction effects of CSs on LiPSs are explained from three working mechanisms: physical confinement, chemical interaction, and catalytic conversion. The protective effect of CSs on lithium anodes is also analyzed from the perspective of interface engineering and 3D structure designing. Furthermore, future directions and prospects are discussed.

SMALL (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Layer-by-Layer Assembly of CeO2-x@C-rGO Nanocomposites and CNTs as a Multifunctional Separator Coating for Highly Stable Lithium-Sulfur Batteries

Yulei Li et al.

Summary: The commercialization of high-energy Li-S batteries is limited by their poor cycle retention and cycling life due to lithium polysulfide shuttling. In this study, a multilayered functional CeO2-x@C-rGO/CNT separator was successfully fabricated, which can effectively hinder the diffusion of polysulfide species, accelerate the redox reactions of sulfur species, and enhance the conductivity for sulfur reactivation and efficient utilization. The Li-S battery assembled with this separator demonstrates excellent capacity, rate capability, and cycling performance, as well as reduced self-discharge and anode corrosion.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Engineering, Environmental

Highly reversible lithium-sulfur batteries with nitrogen-doped carbon encapsulated sulfur cathode and nitrogen-doped carbon-coated ZnS anode

Jong Guk Kim et al.

Summary: This paper investigates the use of nitrogen doped carbon encapsulated sulfur and NC-coated ZnS as cathode and anode materials for full Lithium-sulfur batteries (LSBs). It demonstrates that the system with S@NC and ZnS@NC composites exhibits high discharge capacity, long cycling life, and excellent rate performance, suggesting its potential as a promising next-generation rechargeable battery platform.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Two-dimensional square metal organic framework as promising cathode material for lithium-sulfur battery with high theoretical energy density

Dachang Chen et al.

Summary: Lithium-sulfur (Li-S) batteries are promising for high energy density storage, but face challenges related to the cathode material. This study explores a novel two-dimensional metal organic framework (MOF) as a potential cathode material, which demonstrates good anchoring performance and low volume expansion. The results suggest that this material could significantly reduce polysulfide dissolution and achieve ultra-high energy density.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

An interwoven carbon nanotubes/cerium dioxide electrocatalyst accelerating the conversion kinetics of lithium sulfide toward high- performance lithium-sulfur batteries

Gongyu Wen et al.

Summary: This study addresses the drawbacks of lithium-sulfur (Li-S) batteries by inserting a carbon nanotubes/cerium dioxide interlayer material (CNTs@CeO2) between the sulfur cathode and the separator. The CNTs@CeO2 interlayer provides a conductive network for electron transportation, facilitates the adsorption-catalytic conversion of lithium polysulfides, and promotes electrolyte penetration and lithium ion migration. The Li-S battery with the CNTs@CeO2 interlayer exhibits superior rate performance and excellent cycling stability, showing potential for high-energy-density Li-S batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Engineering, Environmental

Cooperative catalytic Mo-S-Co heterojunctions with sulfur vacancies for kinetically boosted lithium-sulfur battery

Haobin Song et al.

Summary: This study demonstrates the design of catalytic materials with covalent heterojunction and S vacancy for regulating electronic structure and improving LiPSs conversion kinetics. The Li-S battery with MoS2-x-Co9S(8-y)/rGO interlayer shows high sulfur utilization, excellent rate capability, and long cycle life, highlighting the importance of anion deficiency and heterojunction in high-performance Li-S batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Multilevel structured carbon film as cathode host for Li-S batteries with superhigh-areal-capacity

Bin He et al.

Summary: The commercialization of lithium-sulfur (Li-S) battery can be accelerated by designing advanced sulfur cathode with high sulfur utilization and stable cycle life. A multilevel structured carbon film has been demonstrated to provide ultra-high areal capacity and outstanding cyclability for the obtained sulfur cathode.

NANO RESEARCH (2021)

添加到收藏夹

Article Engineering, Chemical

CeO2 decorated graphene as separator modification material for capture and boost conversion of polysulfide in lithium-sulfur batteries

Pu Cheng et al.

Summary: The CeO2@G modified separator enhances the performance of Li-S batteries by immobilizing polysulfides, catalyzing redox reactions, improving electron/ion conductivity, and facilitating sulfur species reutilization, leading to high specific capacity, excellent rate performance, and long-term cycle durability.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Electrochemical storage behavior of NiCo2O4 nanoparticles anode with structural and morphological evolution in lithium-ion and sodium-ion batteries

Mobinul Islam et al.

Summary: NiCo2O4 nanoparticles with sizes of 5-10 nm were prepared using a simple sol-gel method and evaluated as the anode in Li/Na-cells. The anode exhibited excellent performance in the Li battery but poor cycle retention in the Na battery. Structural analysis revealed significant volume expansion in the Na battery, leading to irreversible challenges for the NiCo2O4 anode.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

添加到收藏夹

Article Electrochemistry

Improved lithium storage performance of sulfur loaded by CMK-3 with a tailored hierarchical pore structure

Xi Chen et al.

Summary: Porous carbon material CMK-3 M with a tailored hierarchical pore structure shows superior electrochemical performance in lithium-sulfur batteries. The larger surface area and pore size of CMK-3 M facilitate electron and Li+ ion transfer, as well as enhance interaction with sulfur. The micropores of CMK-3 M can contain smaller sulfur molecules, effectively preventing soluble polysulfide formation and suppressing the shuttle effect of lithium polysulfides. Coating with polyethylene glycol further improves the performance of sulfur-loaded CMK-3 M, suggesting that polymer protection is an effective way to inhibit the polypyl sulfide shuttle.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2021)

添加到收藏夹

Article Engineering, Environmental

Improving confinement and redox kinetics of polysufides through hollow NC@CeO2 nanospheres for high-performance lithium-sulfur batteries

Wentao Qi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Electrochemistry

One-pot conversion of carbon dioxide to CNT-grafted graphene bifunctional for sulfur cathode and thin interlayer of Li-S battery

Seoyeon Baik et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Electrochemistry

Amorphous TiO2 nanofilm interface coating on mesoporous carbon as efficient sulfur host for Lithium-Sulfur batteries

Shengtang Liu et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crepe Cake Structured Layered Double Hydroxide/Sulfur/Graphene as a Positive Electrode Material for Li-S Batteries

Shengtang Liu et al.

ACS NANO (2020)

添加到收藏夹

Article Chemistry, Physical

The effect of cerium oxide addition on the electrochemical properties of lithium-sulfur batteries

Yadong Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Lithium storage performance of {010}-faceted and [111]-faceted anatase TiO2 nanocrystals

Du De-jian et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2019)

添加到收藏夹

Article Chemistry, Physical

Free-standing integrated cathode derived from 3D graphene/carbon nanotube aerogels serving as binder-free sulfur host and interlayer for ultrahigh volumetric-energy-density lithium-sulfur batteries

Haodong Shi et al.

NANO ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional-Ordered Porous Nanostructures for Lithium-Sulfur Battery Anodes and Cathodes Confer Superior Energy Storage Performance

Shengxuan Lin et al.

ACS NANO (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Facile Synthesis of rGO/g-C3N4/CNT Microspheres via an Ethanol Assisted Spray-Drying Method for High-Performance Lithium-Sulfur Batteries

Jianli Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Selenium-sulfur (SeS) fast charging cathode for sodium and lithium metal batteries

Viet Hung Pham et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Graphene-Based Mesoporous SnO2 Nanosheets as Multifunctional Hosts for High-Performance Lithium-Sulfur Batteries

Shengtang Liu et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Three-Dimensional S/CeO2/RGO Composites as Cathode Materials for Lithium-Sulfur Batteries

Qiuyan Hao et al.

MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Two-Dimensional CeO2/RGO Composite-Modified Separator for Lithium/Sulfur Batteries

Suyu Wang et al.

NANOSCALE RESEARCH LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

CeO2-webbed carbon nanotubes as a highly efficient sulfur host for lithium-sulfur batteries

Dengji Xiao et al.

ENERGY STORAGE MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Metal-organic frameworks composites threaded on the CNT knitted separator for suppressing the shuttle effect of lithium sulfur batteries

Feng Wu et al.

ENERGY STORAGE MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Multi- Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium-Sulfur Batteries

Tianyu Lei et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Templated Formation of Interlaced Carbon Nanotubes Threaded Hollow Co3S4 Nanoboxes for High-Rate and Heat-Resistant Lithium-Sulfur Batteries

Tao Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Physical

Nitrogen and phosphorus codoped hierarchically porous carbon as an efficient sulfur host for Li-S batteries

Wei Ai et al.

ENERGY STORAGE MATERIALS (2017)

添加到收藏夹

Article Electrochemistry

Nitrogen-doped Carbon Coated Porous Silicon as High Performance Anode Material for Lithium-Ion Batteries

Min-Gi Jeong et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hierarchical structured graphene/metal oxide/porous carbon composites as anode materials for lithium-ion batteries

Rong Guo et al.

MATERIALS RESEARCH BULLETIN (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium-sulfur battery design

Xinyong Tao et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium-sulfur batteries

Guoxing Li et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

CeO2 nanodots decorated ketjen black for high performance lithium-sulfur batteries

Xinye Qian et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Multidisciplinary Sciences

A binder-free sulfur/reduced graphene oxide aerogel as high performance electrode materials for lithium sulfur batteries

Florian Nitze et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Physical

Tailoring Pore Size of Nitrogen-Doped Hollow Carbon Nanospheres for Confining Sulfur in Lithium-Sulfur Batteries

Weidong Zhou et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Enhancing lithium-sulphur battery performance by strongly binding the discharge products on amino-functionalized reduced graphene oxide

Zhiyu Wang et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Chemistry, Physical

A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries

Xiulei Ji et al.

NATURE MATERIALS (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of new, nanoporous carbon with hexagonally ordered mesostructure

S Jun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.