相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Heat treatment of Ti-6Al-4V alloy manufactured by laser-based powder-bed fusion: Process, microstructures, and mechanical properties correlations
Seyed Alireza Etesami et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
A study on the grain refinement mechanism of Ti-6Al-4V alloy produced by wire arc additive manufacturing using hydrogenation treatment processes
Chen Xiaolong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
New aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti-6Al-4V alloy
Bruna Callegari et al.
MATERIALS CHEMISTRY AND PHYSICS (2022)
Controlling the tensile and fatigue properties of selective laser melted Ti-6Al-4V alloy by post treatment
Chenyu Su et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Dislocation hardening and phase transformation-induced high ductility in Ti-6Al-4V with a heterogeneous martensitic microstructure under tensile load
Hao Sun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
A phenomenological model based on nanostructured dislocation cluster interactions to predict the work hardening behavior of cryodeformed materials
B. Srinivas et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Fatigue life enhancement in alpha/beta Ti-6Al-4V after shot peening: An EBSD and TEM crystallographic orientation mapping study of surface layer
Zheng Zhang et al.
MATERIALIA (2020)
Bi-lamellar microstructure in Ti-6Al-4V: Microstructure evolution and mechanical properties
Yan Chong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Achieving bi-lamellar microstructure with both high tensile strength and large ductility in Ti-6Al-4V alloy by novel thermomechanical processing
Yan Chong et al.
MATERIALIA (2019)
Effect of subtransus heat treatment on the microstructure and mechanical properties of additively manufactured Ti-6Al-4V alloy
Xiang-Yu Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure evolution and static recrystallization during hot rolling and annealing of an equiaxed-structure TC21 titanium alloy
Ke Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Correlation between microstructures and mechanical properties under tensile and compression tests of heat-treated Ti-6Al-4 V ELI alloy produced by additive manufacturing for biomedical applications
Guilherme Arthur Longhitano et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Influence of alloy element partitioning on strength of primary α phasein Ti-6Al-4V alloy
L. R. Zeng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy
Yan Chong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Selective Laser Melting Produced Ti-6Al-4V: Post-Process Heat Treatments to Achieve Superior Tensile Properties
Gerrit M. Ter Haar et al.
MATERIALS (2018)
Hot deformation behavior of Ti-6Al-4V alloy: Effect of initial microstructure
Z. X. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
Haize Galarraga et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys
James D. Paramore et al.
SCIENTIFIC REPORTS (2017)
Indentation Response and Structure-Property Correlation in a Bimodal Ti-6Al-4V Alloy
Indrani Sen et al.
ADVANCED ENGINEERING MATERIALS (2017)
Ductility improvement due to martensite α′ decomposition in porous Ti-6Al-4V parts produced by selective laser melting for orthopedic implants
E. Sallica-Leva et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Optimisation of thickness of miniature tensile specimens for evaluation of mechanical properties
Kundan Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Strain hardening of Titanium alloy Ti6Al4V sheets with prior heat treatment and cold working
R. K. Gupta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Experiments and crystal plasticity finite element simulations of nanoindentation on Ti-6Al-4V alloy
Fengbo Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
A powder metallurgy method for manufacturing Ti-6Al-4V with wrought-like microstructures and mechanical properties via hydrogen sintering and phase transformation (HSPT)
James D. Paramore et al.
SCRIPTA MATERIALIA (2015)
Microstructure-texture-mechanical properties relationship in multi-pass warm rolled Ti-6Al-4V Alloy
S. V. S. Narayana Murty et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys
G. Q. Wu et al.
MATERIALS & DESIGN (2013)
Frequent Occurrence of Discontinuous Dynamic Recrystallization in Ti-6Al-4V Alloy with α′ Martensite Starting Microstructure
Hiroaki Matsumoto et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Microstructure and Texture Evolution During Sub-Transus Thermomechanical Processing of Ti-6Al-4V-0.1B Alloy: Part I. Hot Rolling in (α plus β) Phase Field
Shibayan Roy et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
A Study on Machinability of B-Modified Ti-6Al-4V Alloys by EDM
Indrani Sen et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
Analysis of slip transfer and deformation behavior across the α/β interface in Ti-5Al-2.5Sn (wt.%) with an equiaxed microstructure
James R. Seal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Importance of twinning in static and dynamic compression of a Ti-6Al-4V titanium alloy with an equiaxed microstructure
F. Coghe et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Spheroidization of the lamellar microstructure in Ti-6Al-4V alloy during warm deformation and annealing
S. Zherebtsov et al.
ACTA MATERIALIA (2011)
A Review of Strain Analysis Using Electron Backscatter Diffraction
Stuart I. Wright et al.
MICROSCOPY AND MICROANALYSIS (2011)
Room-temperature ductility of Ti-6Al-4V alloy with α′ martensite microstructure
Hiroaki Matsumoto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effect of hot working and post-deformation heat treatment on microstructure and tensile properties of Ti-6Al-4V alloy
S. M. Abbasi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
Fatigue in Ti-6Al-4V-B alloys
Indrani Sen et al.
ACTA MATERIALIA (2010)
Age-hardening behaviour of two metastable beta-titanium alloys
H. P. Ng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Elastic modulus of Ti-6Al-4V-xB alloys with B up to 0.55 wt.%
Indrani Sen et al.
SCRIPTA MATERIALIA (2010)
A study of the microstructure and hardness of two titanium alloys: Commercially pure and Ti-6Al-4V
N. Poondla et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effect of microstructure on ultra-high cycle fatigue behavior of Ti-6Al-4V
J. H. Zuo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Microstructural effects on the mechanical behavior of B-modified Ti-6Al-4V alloys
Indrani Sen et al.
ACTA MATERIALIA (2007)
Comparison of the fatigue and fracture of Ti-6Al-2Zr-1Mo-1V with lamellar and bimodal microstructures
Shikai Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
The effect of hot rolling condition on the anisotropy of mechanical properties in Ti-6Al-4V alloy
Jin-Hwa Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Mechanical twinning and texture evolution in severely deformed Ti-6Al-4V at high temperatures
Guney Guven Yapici et al.
ACTA MATERIALIA (2006)
The effect of annealing temperatures and cooling rates on microstructure and mechanical properties of investment cast Ti-6Al-4V alloy
MT Jovanovic et al.
MATERIALS & DESIGN (2006)
Hall-Petch revisited
G Saada
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Precipitation of grain boundary α in a laser deposited compositionally graded Ti-8Al-xV alloy -: an orientation microscopy study
R Banerjee et al.
ACTA MATERIALIA (2004)
Micro structural parameters from X-ray diffraction peak broadening
T Ungár
SCRIPTA MATERIALIA (2004)
Titanium alloys for aerospace applications
M Peters et al.
ADVANCED ENGINEERING MATERIALS (2003)
Deformation twins in pure titanium processed by equal channel angular pressing
I Kim et al.
SCRIPTA MATERIALIA (2003)
The effect of microstructure on the mechanical properties of two-phase titanium alloys
R Filip et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Shear strain accommodation during severe plastic deformation of titanium using equal channel angular pressing
DH Shin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing
R Ding et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Formation of α-Widmanstatten structure:: effects of grain size and cooling rate on the Widmanstatten morphologies and on the mechanical properties in Ti6Al4V alloy
FJ Gil et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)
The effect of alpha platelet thickness on plastic flow during hot working of Ti-6Al-4V with a transformed microstructure
SL Semiatin et al.
ACTA MATERIALIA (2001)
An approach to micro-macro modeling of heterogeneous materials
V Kouznetsova et al.
COMPUTATIONAL MECHANICS (2001)
分享论文
