☆ 4.7 Article

Microstructure evolution and mechanical response of Co-free Ni2CrFeAl0.3Tix high-entropy alloys

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy

Liyuan Liu et al.

Summary: A new Ni-35(CoFe)(55)V5Nb5 high-entropy alloy with a novel bifunctional L-12-Ni3Nb nano-precipitate was developed to enhance the strength and ductility synergy of the alloy, showing high yield strength, ultimate tensile strength, and remarkable elongation. The novel nano-precipitates play a dual role in improving the alloy properties through precipitation strengthening and lowering the stacking fault energy for better work-hardening ability and plasticity.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Superb strength and ductility balance of a Co-free medium-entropy alloy with dual heterogeneous structures

Wenjie Lu et al.

Summary: In this study, a novel Co-free non-equiatomic Ni46Cr23Fe23Al4Ti4 medium-entropy alloy with dual heterogeneous structures was successfully fabricated, exhibiting remarkable strength-ductility synergy properties. The main mechanisms contributing to strength enhancement were precipitation hardening and hetero-deformation induced hardening. The alloy not only showed high strength and excellent ductility, but also had high work-hardening capacity.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stability of thermal cycling and high temperature mechanical properties for Ti-V-Al-B lightweight shape memory alloy

Haizhen Wang et al.

Summary: The microstructure of the Ti-V-Al shape memory alloy was improved by doping minor Boron (B), resulting in enhanced mechanical performance, strain recovery characteristics, and thermal cycling stability. The addition of Boron contributed to the solution strengthening, grain refinement, and precipitation strengthening of in-situ TiB phase, leading to the highest ultimate tensile stress and largest tensile fracture strain. Moreover, the alloy exhibited excellent strain recovery with fully recoverable strain, and the precipitation of omega phase during thermal cycling was suppressed.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Physical

Optimizing strength and ductility in 7150 Al alloys via rapid electropulsing cyclic heat treatment

Kai Chen et al.

Summary: In this study, electropulsing cyclic heat treatment (ECHT) process was used to control the microstructure and optimize the mechanical properties of 7150 Al alloys. The results showed that after only 10 ECHT cycles for 1 hour, the 7150 Al alloys achieved high strength and excellent ductility properties. The main reason for the improved properties was attributed to the accelerated nucleation of coherent Guinier-Preston (GP) zones and fine n' precipitates, as well as the increase in dislocation density caused by ECHT. The quantitative analysis indicated that the strengthening mechanisms mainly relied on precipitation Orowan strengthening and dislocation strengthening.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unveiling the precipitation behavior and mechanical properties of Co-free Ni47-xFe30Cr12Mn8AlxTi3 high-entropy alloys

Jiantao Fan et al.

Summary: This study systematically investigates the precipitation and mechanical behaviors of a Co-free HEA with a dilute amount of Al addition. The results show that the addition of Al affects the formation of different phases and the mechanical properties of the alloy. The study provides valuable insights for developing high-performance Co-free HEAs/MEAs strengthened by nanoprecipitates through composition optimization.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical properties of AlxCoCrFeNi high-entropy alloys by laser melting deposition

Liufei Huang et al.

Summary: AlxCoCrFeNi high entropy alloys were successfully synthesized by laser melting deposition, with the microstructure transforming from a single FCC phase to a mixture of FCC + BCC phases as the Al content increased. The addition of Al significantly improved the yield strength and tensile strength while reducing plasticity in tension.

VACUUM (2021)

添加到收藏夹

Article Chemistry, Physical

Phase separation and mechanical behavior of AlCoCrFeNi-X (X = Cu, Mn, Ti) high entropy alloys processed via powder metallurgy

Min Chul Oh et al.

Summary: This study investigated the phase separation behavior and mechanical properties of AlCoCrFeNi-X (X = Cu, Mn, Ti) high-entropy alloys. The incorporation of suitable additive elements (X = Cu, Mn, Ti) can selectively tune the microstructural and mechanical properties of AlCoCrFeNi HEAs. The mechanical properties of AlCoCrFeNi-X (X = Mn, Ti) alloys were found to be superior to those of the AlCoCrFeNi-Cu alloy due to higher BCC fraction and the presence of a fine nanoscale BCC/B2 matrix coupled with high modulus and hard a-phases in AlCoCrFeNi-Mn alloy.

INTERMETALLICS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanoprecipitate-Strengthened High-Entropy Alloys

Liyuan Liu et al.

Summary: HEAs can be tuned to a simple phase with unique alloy characteristics, such as high strength and hardness with low ductility in BCC or HCP structures, and a combination of considerable ductility, excellent corrosion and radiation resistance in FCC structures. Precipitation strengthening is an effective method to enhance the strength of HEAs by forming fine and stable nanoscale precipitates. This paper reviews the recent progress in nanoprecipitate-strengthened HEAs and highlights alloy-design strategies and control of nanoscale precipitates.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Engineering, Mechanical

Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling

T. W. Zhang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Nanoscale precipitates as sustainable dislocation sources for enhanced ductility and high strength

Shenyou Peng et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of CoCrFeNiMn high entropy alloy matrix composites by thermomechanical consolidation of a mechanically milled powder

Yuehuang Xie et al.

MATERIALS CHARACTERIZATION (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic interactions between non-screw dislocations and stacking faults during in situ straining in a TEM

Zongde Kou et al.

MATERIALS CHARACTERIZATION (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Microstructures and Mechanical Properties of AlCrFeNiMo0.5Tix High Entropy Alloys

Zhi-Dong Han et al.

CHINESE PHYSICS LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Stacking fault energy of face-centered-cubic high entropy alloys

S. F. Liu et al.

INTERMETALLICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

The formation of cellular precipitate and its effect on the tensile properties of a precipitation strengthened high entropy alloy

Yao-Jen Chang et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates

Y. L. Zhao et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Competitive effect of stacking fault energy and short-range clustering on the plastic deformation behavior of Cu-Ni alloys

Z. Y. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Chemistry, Physical

Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

Wei Ji et al.

INTERMETALLICS (2015)

添加到收藏夹

Article Chemistry, Physical

Microstructures and mechanical properties of AlxCrFeNiTi0.25 alloys

S. Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Chemistry, Physical

Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification

S. G. Ma et al.

INTERMETALLICS (2014)

添加到收藏夹

Article Chemistry, Physical

Microstructure and oxidation behavior of new refractory high entropy alloys

C. M. Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Prediction of high-entropy stabilized solid-solution in multi-component alloys

X. Yang et al.

MATERIALS CHEMISTRY AND PHYSICS (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys

Tao-Tsung Shun et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermodynamic modeling of the stacking fault energy of austenitic steels

S. Curtze et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Electrochemistry

Thermal Stability and Performance of NbSiTaTiZr High-Entropy Alloy Barrier for Copper Metallization

Ming-Hung Tsai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase

Sheng Guo et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical passive properties of AlxCoCrFeNi (x=0, 0.25, 0.50, 1.00) alloys in sulfuric acids

Yih-Farn Kao et al.

CORROSION SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pitting corrosion of the high-entropy alloy Co1.5CrFeNi1.5Ti0.5Mo0.1 in chloride-containing sulphate solutions

Y. L. Chou et al.

CORROSION SCIENCE (2010)

添加到收藏夹

Article Engineering, Mechanical

Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys

Chin-You Hsu et al.

WEAR (2010)

添加到收藏夹

Article Physics, Applied

Phase transformation induced by lattice distortion in multiprincipal component CoCrFeNiCuxAl1-x solid-solution alloys

Y. J. Zhou et al.

APPLIED PHYSICS LETTERS (2008)

添加到收藏夹

Article Physics, Applied

Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties

Y. J. Zhou et al.

APPLIED PHYSICS LETTERS (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent progress in high-entropy alloys

Jien-Wei Yeh

ANNALES DE CHIMIE-SCIENCE DES MATERIAUX (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element

A Takeuchi et al.

MATERIALS TRANSACTIONS (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys

S Allain et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.