☆ 4.7 Article

Resistance optimization of a coil with substrate and design of a high-power-density coupler for wireless power transfer

ISA TRANSACTIONS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

High-Misalignment-Tolerant IPT Systems With Solenoid and Double D Pads

Jianwei Mai et al.

Summary: A new loosely coupled transformer structure is proposed in this article to improve the misalignment tolerance of an inductive power transfer system. The designed transformer has strong misalignment tolerance in both the X and Y directions, and demonstrates good performance in a practical example.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

添加到收藏夹

Article Automation & Control Systems

A New Coil Structure of Dual Transmitters and Dual Receivers With Integrated Decoupling Coils for Increasing Power Transfer and Misalignment Tolerance of Wireless EV Charging System

Amran Hossain et al.

Summary: This article introduces a new inductive power transfer (IPT) system with dual transmitters and dual receivers, as well as integrated decoupling coils. The proposed decoupling coils not only mitigate the mutual inductances of the same-side coils, but also participate in power transmission, and have good misalignment performance.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Wireless charging systems for electric vehicles

Muhammad Amjad et al.

Summary: This paper reviews the methods and techniques used for wireless charging in electric vehicles, compares capacitive and inductive wireless charging, discusses both stationary and dynamic wireless charging systems, and explores the importance of control system functions and battery selection for efficient charging.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Novel S-S-LCLCC Compensation for Three-Coil WPT to Improve Misalignment and Energy Efficiency Stiffness of Wireless Charging System

Peyman Darvish et al.

Summary: Recent studies have shown that the three-coil wireless power transfer design outperforms the two-coil design in efficiency and performance, especially as source resistance and transmission distance increase. The new design allows for load-independent output voltage throughout the charging process, improving energy efficiency and reducing voltage stress.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Exciter-Quadrature-Repeater Transmitter for Wireless Electric Vehicle Charging With High Lateral Misalignment Tolerance and Low EMF Emission

Zhichao Luo et al.

Summary: The proposed exciter-quadrature-repeater transmitter pad system achieves high lateral misalignment tolerance and low leakage flux emission in electric vehicle wireless charging applications. It maintains constant current charging conditions within a certain range and achieves efficient energy transmission.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Optimal Design of Fully Integrated Magnetic Structure for Wireless Charging of Electric Vehicles

Ali Ramezani et al.

Summary: This article proposes an optimal design of a fully integrated magnetic structure for electric vehicle (EV) wireless charging, which helps save materials, reduce costs, and improve power density. By integrating resonant elements and dc-dc inductors, the system achieves efficient wireless charging with compact converters.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2021)

添加到收藏夹

Article Energy & Fuels

Modelling and improvement of oscillation problem in a double-sided LCC compensation network for electric vehicle wireless power transfer

Bingkun Shi et al.

Summary: This study proposes a solution to address the current oscillation issue in a double-sided LCC system by minimizing the admittance amplification effect through adding inductors and capacitors. The proposed method has been validated through comprehensive simulations and experimental tests, confirming its effectiveness in expanding the safe operating region and reducing the number of oscillating operating points.

ETRANSPORTATION (2021)

添加到收藏夹

Review Energy & Fuels

A comprehensive overview of inductive pad in electric vehicles stationary charging

Ahmed A. S. Mohamed et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Automation & Control Systems

Automatic Impedance Matching Method With Adaptive Network Based Fuzzy Inference System for WPT

Yang Li et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Efficiency Analysis and Optimization Control for Input-Parallel Output-Series Wireless Power Transfer Systems

Yong Li et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Advances in High-Power Wireless Charging Systems: Overview and Design Considerations

Hao Feng et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Improving Misalignment Tolerance for IPT System Using a Third-Coil

Yang Chen et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Particle Swarm Optimization-Based Parameter Design Method for S/CLC-Compensated IPT Systems Featuring High Tolerance to Misalignment and Load Variation

Yousu Yao et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

添加到收藏夹

Article Automation & Control Systems

Transmitter Coils Design for Free-Positioning Omnidirectional Wireless Power Transfer System

Junjie Feng et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)

添加到收藏夹

Article Automation & Control Systems

Front-End Parameter Monitoring Method Based on Two-Layer Adaptive Differential Evolution for SS-Compensated Wireless Power Transfer Systems

Yun Yang et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)

添加到收藏夹

Article Engineering, Biomedical

Practical Inductive Link Design for Biomedical Wireless Power Transfer: A Tutorial

Matthew Schormans et al.

IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS (2018)

添加到收藏夹

Article Automation & Control Systems

Analysis of Square and Circular Planar Spiral Coils in Wireless Power Transfer System for Electric Vehicles

Zhichao Luo et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Dual-Coupled LCC-Compensated IPT System With a Compact Magnetic Coupler

Fei Lu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

添加到收藏夹

Article Automation & Control Systems

Hybrid Bidirectional Wireless EV Charging System Tolerant to Pad Misalignment

Lei Zhao et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Integrated Characterization Model and Multiobjective Optimization for the Design of an EV Charger's Circular Wireless Power Transfer Pads

Abla Hariri et al.

IEEE TRANSACTIONS ON MAGNETICS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

A 3-kW Wireless Power Transfer System for Sightseeing Car Supercapacitor Charge

Zhenjie Li et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Nested three-layer optimisation method for magnetic coils used in 3 kW vehicle-mounted wireless power transfer system

Zhenshi Wang et al.

IET POWER ELECTRONICS (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Influence of Inner Skin- and Proximity Effects on Conduction in Litz Wires

Andreas Rosskopf et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Extended theory on the inductance calculation of planar spiral windings including the effect of double-layer electromagnetic shield

Y. P. Su et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2008)

添加到收藏夹

Article Multidisciplinary Sciences

Wireless power transfer via strongly coupled magnetic resonances

Andre Kurs et al.

SCIENCE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.