4.7 Article

Investigation on intragranular and intergranular void growth and their competition in polycrystalline materials

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Mechanical

The effect of material orientation on void growth

N. Hosseini et al.

Summary: This study reveals the effect of material orientation and angular misalignment on void growth, and proposes a strategic utilization of material orientation and angular misalignment to control void growth.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Article Engineering, Mechanical

Multiscale stress and strain statistics in the deformation of polycrystalline alloys

Jingwei Chen et al.

Summary: In this study, the inhomogeneity of multiscale stresses and strains in polycrystalline metals was investigated using a rate-independent crystal plasticity formulation. The statistical distribution of stress and strain at macro-, meso- and micro-scales were explored through multiple realizations of a cubic representative volume element (RVE). The findings reveal that the dispersion of local stress and strain is much larger than that of the macroscopic average, providing new guidance for determining the minimum RVE size.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Article Materials Science, Multidisciplinary

4D imaging of void nucleation, growth, and coalescence from large and small inclusions in steel under tensile deformation

Yi Guo et al.

Summary: This study utilized high-resolution CT technology to perform real-time 3D imaging during tensile straining of SA508 grade 3 nuclear pressure vessel steel, allowing direct observation of void development. The results validated previous inferences and theoretical models while also presenting new insights.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Engineering, Mechanical

Role of crystallographic orientation on intragranular void growth in polycrystalline FCC materials

Paul G. Christodoulou et al.

Summary: This study investigates the effect of crystallographic orientation and applied triaxiality on the growth of intragranular voids using two 3D micromechanics methods. The results show that loading type significantly influences void growth rate, and void growth is slower in polycrystals compared to single crystals. Furthermore, at the highest triaxiality tested, the correlation between crystal orientation and void growth rate in polycrystals strengthens.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Engineering, Mechanical

Void growth based inter-granular ductile fracture in strain gradient polycrystalline plasticity

T. Yalcinkaya et al.

Summary: High strength aerospace alloys, such as the Al 7000 series, are prone to loss of fracture toughness during heat treatment, leading to intergranular ductile fracture. This is often caused by the formation of large precipitates at grain boundaries and the development of precipitate free zones. Consequently, grain boundaries become potential locations for micro void formation and evolution under external loads, resulting in intergranular crack formation and propagation in the material.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Engineering, Mechanical

Microvoid growth mechanism in FCC polycrystals and a statistical damage model

Jianqiu Liu et al.

Summary: In this study, the growth of microvoids in polycrystals under finite deformation was investigated, revealing significant influences of crystallographic orientation of grains and local heterogeneous polycrystalline microstructure on microvoid growth. Additionally, the size ratio of microvoid to voided grain was found to heavily influence microvoid growth, indicating a strong size effect in heterogeneous polycrystals.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Mechanics

Influence of crystallographic orientation on the void growth at the grain boundaries in bi-crystals

Manjunath Dakshinamurthy et al.

Summary: This study investigates void growth and morphology evolution in fcc bi-crystals using crystal plasticity finite element method. Different crystal orientations (hard-hard, soft-soft, soft-hard) are employed to model the mechanical response of the bi-crystal. The presence and growth of voids have an impact on the heterogeneity of lattice rotation and grain fragmentation in neighboring areas.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Article Engineering, Mechanical

Effect of slip transmission at grain boundaries in Al bicrystals

S. Haouala et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Engineering, Mechanical

Numerical investigation of necking in perforated sheets using the periodic homogenization approach

Jianchang Zhu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Article Engineering, Mechanical

Crystal plasticity based investigation of micro-void evolution under multi-axial loading conditions

He-Jie Guo et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Materials Science, Multidisciplinary

Investigation of the competition between void coalescence and macroscopic strain localization using the periodic homogenization multiscale scheme

J. C. Zhu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

Article Engineering, Mechanical

A grain boundary model for gradient-extended geometrically nonlinear crystal plasticity: Theory and numerics

Atefeh Alipour et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Article Engineering, Mechanical

A unified criterion for void growth and coalescence under combined tension and shear

Mohammad E. Torki

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Article Materials Science, Multidisciplinary

Atomistically motivated interface model to account for coupled plasticity and damage at grain boundaries

Shahed Rezaei et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)

Article Materials Science, Multidisciplinary

A coalescence criterion for porous single crystals

J. Hure

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)

Article Engineering, Mechanical

A CPFEM based study to understand the void growth in high strength dual-phase titanium alloy (Ti-10V-2Fe-3Al)

Umair Bin Asim et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Article Engineering, Mechanical

Diffuse interface approach to modeling crystal plasticity with accommodation of grain boundary sliding

Tian-Le Cheng et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Article Materials Science, Multidisciplinary

Intragranular void formation in shock-spalled tantalum: Mechanisms and governing factors

M. Cheng et al.

ACTA MATERIALIA (2018)

Article Mechanics

A nonlocal triaxiality and shear dependent continuum damage model for finite strain elastoplasticity

Yazhi Zhu et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2018)

Article Engineering, Mechanical

Phenomenological uncoupled ductile fracture model considering different void deformation modes for sheet metal forming

Lei Mu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Article Materials Science, Multidisciplinary

On the prediction of ductile fracture by void coalescence and strain localization

Tuo Luo et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Article Materials Science, Multidisciplinary

Void-sheet analysis on macroscopic strain localization and void coalescence

T. F. Guo et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Article Nanoscience & Nanotechnology

In situ TEM investigation on void coalescence in metallic materials

Bo Gao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Mechanics

A new shear and tension based ductile fracture criterion: Modeling and validation

Qi Hu et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2017)

Article Mechanics

Unit cell simulations and porous plasticity modelling for strongly anisotropic FCC metals

Lars Edvard Bryhni Daehli et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2017)

Article Engineering, Mechanical

Theoretical and numerical analysis of void coalescence in porous ductile solids under arbitrary loadings

M. E. Torki et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Article Materials Science, Multidisciplinary

Void growth and coalescence in triaxial stress fields in irradiated FCC single crystals

Chao Ling et al.

JOURNAL OF NUCLEAR MATERIALS (2017)

Article Materials Science, Multidisciplinary

Void growth in high strength aluminium alloy single crystals: a CPFEM based study

Umair Asim et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2017)

Article Materials Science, Multidisciplinary

Ductile failure modeling

Ahmed Amine Benzerga et al.

INTERNATIONAL JOURNAL OF FRACTURE (2016)

Article Engineering, Mechanical

Void behaviors from low to high triaxialities: Transition from void collapse to void coalescence

Z. G. Liu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

Article Mechanics

An approximate yield criterion for porous single crystals

J. Paux et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)

Article Materials Science, Multidisciplinary

A void nucleation and growth based damage framework to model failure initiation ahead of a sharp notch in irradiated bcc materials

Anirban Patra et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)

Article Materials Science, Multidisciplinary

On the energetics of tensile and shear void coalescences

W. H. Wong et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)

Article Materials Science, Multidisciplinary

Effect of crystal orientation on porosity evolution in a creeping single crystal

A. Srivastava et al.

MECHANICS OF MATERIALS (2015)

Article Multidisciplinary Sciences

On localization and void coalescence as a precursor to ductile fracture

C. Tekoglu et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2015)

Article Materials Science, Multidisciplinary

Heterogenous void growth revealed by in situ 3-D X-ray microtomography using automatic cavity tracking

L. Lecarme et al.

ACTA MATERIALIA (2014)

Article Engineering, Mechanical

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Article Materials Science, Multidisciplinary

Effect of Lode parameter on plastic flow localization after proportional loading at low stress triaxialities

Matthieu Dunand et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)

Article Materials Science, Multidisciplinary

Modeling void growth in polycrystalline materials

Ricardo A. Lebensohn et al.

ACTA MATERIALIA (2013)

Article Mechanics

A yield function for single crystals containing voids

X. Han et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Article Materials Science, Multidisciplinary

Void growth versus void collapse in a creeping single crystal

A. Srivastava et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)

Article Nanoscience & Nanotechnology

Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling

S. Thuillier et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Materials Science, Multidisciplinary

Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels

C. Landron et al.

ACTA MATERIALIA (2011)

Article Mechanics

Void growth and coalescence in anisotropic plastic solids

S. M. Keralavarma et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)

Article Materials Science, Multidisciplinary

Dilatational viscoplasticity of polycrystalline solids with intergranular cavities

R. A. Lebensohn et al.

PHILOSOPHICAL MAGAZINE (2011)

Article Engineering, Mechanical

Void growth and coalescence in f.c.c. single crystals

Sangyul Ha et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)

Article Mechanics

Void growth and coalescence in single crystals

S. K. Yerra et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)

Article Materials Science, Multidisciplinary

BCC single crystal plasticity modeling and its experimental identification

T. Yalcinkaya et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2008)

Article Engineering, Mechanical

Linear transfomation-based anisotropic yield functions

F Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2005)

Article Materials Science, Multidisciplinary

An extended model for void growth and coalescence

T Pardoen et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)