相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Nanocrystal-based 3D-printed tablets: Semi-solid extrusion using melting solidification printing process (MESO-PP) for oral administration of poorly soluble drugs
Lucia Lopez-Vidal et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)
Inclusion Complexes of Rifampicin with Native and Derivatized Cyclodextrins: In Silico Modeling, Formulation, and Characterization
Qonita Kurnia Anjani et al.
PHARMACEUTICALS (2022)
Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers (vol 13, pg 38969, 2021)
Laura Ruiz-Cantu et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
3D-printed implantable devices with biodegradable rate-controlling membrane for sustained delivery of hydrophobic drugs
Camila J. Picco et al.
DRUG DELIVERY (2022)
PLGA implants for controlled drug release: Impact of the diameter
C. Bassand et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2022)
Development of intranasal implantable devices for schizophrenia treatment
Emilia Utomo et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)
TPU-based antiplatelet cardiovascular prostheses prepared using fused deposition modelling
Juan Dominguez-Robles et al.
MATERIALS & DESIGN (2022)
Development of intranasal implantable devices for schizophrenia treatment
Emilia Utomo et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)
3D printed tacrolimus suppositories for the treatment of ulcerative colitis
Iria Seoane-Viano et al.
ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Use of 3D Printing for the Development of Biodegradable Antiplatelet Materials for Cardiovascular Applications
Juan Dominguez-Robles et al.
PHARMACEUTICALS (2021)
3D Printing as a Promising Tool in Personalized Medicine
Vanessa Marcia Vaz et al.
AAPS PHARMSCITECH (2021)
3D printed estradiol-eluting urogynecological mesh implants: Influence of material and mesh geometry on their mechanical properties
Zara-Louise Farmer et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Fused deposition modelling for the development of drug loaded cardiovascular prosthesis
Niamh K. Martin et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Evolution of drug-eluting biomedical implants for sustained drug delivery
Juliana C. Quarterman et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2021)
3D printed polymeric drug-eluting implants
Athina Liaskoni et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Design and Testing of a Cabotegravir Implant for HIV Prevention
Dipu Karunakaran et al.
JOURNAL OF CONTROLLED RELEASE (2021)
Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines
Sylvain Cailleaux et al.
JOURNAL OF CONTROLLED RELEASE (2021)
Artemether and lumefantrine dissolving microneedle patches with improved pharmacokinetic performance and antimalarial efficacy in mice infected with Plasmodium yoelii
Fabiana Volpe-Zanutto et al.
JOURNAL OF CONTROLLED RELEASE (2021)
3D Printing Personalized, Photocrosslinkable Hydrogel Wound Dressings for the Treatment of Thermal Burns
Jia Heng Teoh et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Poly(caprolactone)-based subcutaneous implant for sustained delivery of levothyroxine
Sarah A. Stewart et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D-Printing of Drug-Eluting Implants: An Overview of the Current Developments Described in the Literature
Vanessa Domsta et al.
MOLECULES (2021)
3D Printing of Drug-Loaded Thermoplastic Polyurethane Meshes: A Potential Material for Soft Tissue Reinforcement in Vaginal Surgery
Juan Dominguez-Robles et al.
PHARMACEUTICS (2020)
Development of a Biodegradable Subcutaneous Implant for Prolonged Drug Delivery Using 3D Printing
Sarah A. Stewart et al.
PHARMACEUTICS (2020)
Measuring the Particle Packing of L-Glutamic Acid Crystals through X-ray Computed Tomography for Understanding Powder Flow and Consolidation Behavior
T. D. Turner et al.
CRYSTAL GROWTH & DESIGN (2020)
3D printing for oral drug delivery: a new tool to customize drug delivery
Manisha Pandey et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2020)
Urogynecological surgical mesh implants: New trends in materials, manufacturing and therapeutic approaches
Zara-Louise Farmer et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
3D printing: Principles and pharmaceutical applications of selective laser sintering
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
A Graphical Review on the Escalation of Fused Deposition Modeling (FDM) 3D Printing in the Pharmaceutical Field
Alice Melocchi et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Poly(caprolactone)-Based Coatings on 3D-Printed Biodegradable Implants: A Novel Strategy to Prolong Delivery of Hydrophilic Drugs
Sarah A. Stewart et al.
MOLECULAR PHARMACEUTICS (2020)
Porous poly(ε-caprolactone) implants: A novel strategy for efficient intraocular drug delivery
Raquel Boia et al.
JOURNAL OF CONTROLLED RELEASE (2019)
Extended-Duration MK-8591-Eluting Implant as a Candidate for HIV Treatment and Prevention
Stephanie E. Barrett et al.
ANTIMICROBIAL AGENTS AND CHEMOTHERAPY (2018)
Oral disintegrating patient-tailored tablets of warfarin sodium produced by 3D printing
Pan Tian et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2018)
3D extrusion printing of high drug loading immediate release paracetamol tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Extrusion 3D Printing of Paracetamol Tablets from a Single Formulation with Tunable Release Profiles Through Control of Tablet Geometry
Shaban A. Khaled et al.
AAPS PHARMSCITECH (2018)
An innovative approach towards 3D-printed scaffolds for the next generation of tissue-engineered vascular grafts
Fatemeh Kabirian et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Economic impact of medication non-adherence by disease groups: a systematic review
Rachelle Louise Cutler et al.
BMJ OPEN (2018)
'Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art
Stuart Kyle et al.
ADVANCED HEALTHCARE MATERIALS (2017)
3D-Printed Biodegradable Polymeric Vascular Grafts
Anthony J. Melchiorri et al.
ADVANCED HEALTHCARE MATERIALS (2016)
In Vitro Cytocompatibility Study of a Medical β-Type Ti-35.5Nb-5.7Ta Titanium Alloy
Krishna Burugapalli et al.
JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING (2016)
Drug loading of polymer implants by supercritical CO2 assisted impregnation: A review
M. Champeau et al.
JOURNAL OF CONTROLLED RELEASE (2015)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
In Vitro Release from Reverse Poloxamine/alpha-Cyclodextrin Matrices: Modelling and Comparison of Dissolution Profiles
Eneko Larraneta et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
The Influence of Drug Physical State on the Dissolution Enhancement of Solid Dispersions Prepared Via Hot-Melt Extrusion: A Case Study Using Olanzapine
Maria Fatima Pina et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
Cytotoxicity, cytocompatibility, cell-labeling efficiency, and in vitro cellular magnetic resonance imaging of gadolinium- catalyzed single-walled carbon nanotubes
Pramod K. Avti et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Medication adherence in schizophrenia: factors influencing adherence and consequences of nonadherence, a systematic literature review
Kyoko Higashi et al.
THERAPEUTIC ADVANCES IN PSYCHOPHARMACOLOGY (2013)
Identification and Characterization of Olanzapine Degradation Products under Oxidative Stress Conditions
S. G. Hiriyanna et al.
ACTA CHROMATOGRAPHICA (2008)
Modeling of drug release from biodegradable polymer blends
Luciana Lisa Lao et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
Safety and efficacy of Implanon™, a single-rod implantable contraceptive containing etonogestrel
S Funk et al.
CONTRACEPTION (2005)
Manufacturing techniques of biodegradable implants intended for intraocular application
SL Fialho et al.
DRUG DELIVERY (2005)
In vitro biocompatibility assessment of poly(ε-caprolactone) films using L929 mouse fibroblasts
MC Serrano et al.
BIOMATERIALS (2004)
Taste masking technologies in oral pharmaceuticals: Recent developments and approaches
H Sohi et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2004)
Evaluation of mathematical models describing drug release from estradiol transdermal systems
P Costa et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2003)