4.5 Article

Enhancement in the pool boiling heat transfer of copper surface by applying electrophoretic deposited graphene oxide coatings

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Broadband polarization-insensitive and oblique-incidence terahertz metamaterial absorber with multi-layered graphene

Xiaojun Huang et al.

Summary: In this paper, a broadband terahertz metamaterial absorber based on graphene-polyimide composite structure is proposed and its excellent performance is verified through simulations. The absorber exhibits high absorptance and wide bandwidth, and can be controlled by adjusting the chemical potential of graphene. Additionally, it shows good adaptability to polarization and oblique incidence.

OPTICAL MATERIALS EXPRESS (2022)

Article Engineering, Mechanical

Study on Properties of Potassium Sodium Niobate Coating Prepared by High Efficiency Supersonic Plasma Spraying

Longlong Zhou et al.

Summary: In order to construct an environmentally friendly potassium sodium niobate ceramic coating on metal surface, potassium sodium niobate ceramic coating was prepared using supersonic plasma spraying technology. The morphology, element distribution, and phase structure of the coating were investigated, and the dielectric and ferroelectric properties were also analyzed. The results showed that the coating exhibited good quality and a tetragonal phase structure, with stable dielectric properties and good hysteresis loops under different electric fields.

ACTUATORS (2022)

Article Physics, Applied

Synergic realization of electrical insulation and mechanical strength in liquid nitrogen for high-temperature superconducting tapes with ultra-thin acrylic resin coating

Chunjiang Guo et al.

Summary: In this study, a novel technique for preparing ultra-thin and fully surrounded insulation coatings on REBCO tapes was developed. The insulation coatings completely eliminate the risk of critical current degradation induced by high temperature curing, while maintaining excellent mechanical performance and insulation properties.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

Article Engineering, Mechanical

Transient thermomechanical analysis of micro cylindrical asperity sliding contact of SnSbCu alloy

Hanzhang Xu et al.

Summary: A transient thermomechanical sliding model was established to analyze the contact behaviors of elastic-plastic micro asperities, taking into consideration the coupling effect of temperature and strain rate on material properties. The study focused on the commonly used SnSbCu alloy in marine engines for journal bearings. Results showed that considering the effect of temperature and strain rate on material properties at the micro scale can enhance the practicality and accuracy of the contact model. Additionally, the influence of sliding conditions and mechanical properties of material on contact behaviors was studied based on the sliding contact model.

TRIBOLOGY INTERNATIONAL (2022)

Article Chemistry, Multidisciplinary

The Combination of Two-Dimensional Nanomaterials with Metal Oxide Nanoparticles for Gas Sensors: A Review

Tao Li et al.

Summary: This review presents recent advances in the fabrication of metal oxide-based gas sensors and 2D nanomaterial-based gas sensors. By combining metal oxides with 2D nanomaterials to construct heterostructures, the fabricated gas sensors exhibit highly sensitive and selective functions. The review discusses the working principles of various gas sensors and factors affecting the sensitivity of gas sensors. Many examples of gas sensor fabrication using metal oxides, 2D materials, and their composites are demonstrated. The review concludes with a summary of the current development and potential research directions in this field.

NANOMATERIALS (2022)

Article Chemistry, Multidisciplinary

State-of-the-Art Review of Electrospun Gelatin-Based Nanofiber Dressings for Wound Healing Applications

Tao Li et al.

Summary: Electrospun nanofiber materials, particularly those based on gelatin, have shown promise as advanced dressings for wound healing and skin regeneration. They possess high porosity, excellent barrier performance against pathogens, and a mimicry of extracellular matrix fibrils. Various crosslinking approaches and innovative electrospinning strategies have been used to enhance their mechanical properties. Additionally, bioactive components and therapeutic agents can be incorporated to impart multiple functions to these nanofiber dressings. This review provides a comprehensive overview of gelatin-based nanofiber dressings and their applications in wound healing and skin regeneration.

NANOMATERIALS (2022)

Article Energy & Fuels

Experimental Investigation on Improvement of Wet Cooling Tower Efficiency with Diverse Packing Compaction Using ANN-PSO Algorithm

Hasan Alimoradi et al.

Summary: This study developed a numerical and empirical scheme to enhance the performance of cooling towers by combining the PSO algorithm with a neural network. Experimental analysis showed significant effects of packing compaction on performance. Results indicated that increasing air flow rate, water flow rate, and packing compaction can improve cooling tower efficiency.

ENERGIES (2021)

Article Chemistry, Physical

Effects of NbC content on microstructural evolution and mechanical properties of laser cladded Fe50Mn30Co10Cr10-xNbC composite coatings

Xiaofeng Li et al.

Summary: This study fabricated NbC reinforced Fe50Mn30Co10Cr10 high entropy alloy coatings with different NbC content by laser cladding, analyzed the formation mechanism and effects of NbC particles at micro/nano scale, and investigated the influence of NbC content on microstructure and mechanical properties of the coatings. It also explored the impact of NbC particles on FCC phase stability and demonstrated significant improvements in micro-hardness and wear resistance with increasing NbC content.

INTERMETALLICS (2021)

Article Engineering, Chemical

A novel numerical investigation of erosion wear over various 90-degree elbow duct sections

M. H. Zolfagharnasab et al.

Summary: This study investigates the erosion mechanism on square duct elbows using CFD, revealing a novel erosion pattern. The research also concludes that the erosion rate of square ducts is generally lower than that of common pipes.

POWDER TECHNOLOGY (2021)

Article Agricultural Engineering

Improvement of Alcaligenes sp.TB performance by Fe-Pd/multi-walled carbon nanotubes: Enriched denitrification pathways and accelerated electron transport

Zeyu Wang et al.

Summary: This study focused on improving denitrification performance by using Pd-Fe embedded multi-walled carbon nanotubes (MWCNTs), which showed excellent promotion on denitrification, leading to increased nitrite reductase activity and electron exchange capacity. The enhanced electron transport activity during denitrification process by Pd-Fe/MWCNTs played a crucial role in acting as a chemical reductant and redox mediator.

BIORESOURCE TECHNOLOGY (2021)

Article Thermodynamics

A novel scheme for simulating the effect of microstructure surface roughness on the heat transfer characteristics of subcooled flow boiling

Hasan Alimoradi et al.

Summary: In this study, a new model was developed to investigate the effect of surface roughness on subcooled flow boiling, showing that microstructure surface roughness can decrease wall surface temperature, and increase vapor volume fraction and heat transfer coefficient.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Materials Science, Composites

Effective interlaminar reinforcing and delamination monitoring of carbon fibrous composites using a novel nano-carbon woven grid

Guangming Yang et al.

Summary: The study demonstrates that a woven grid composed of carbon nanotubes and graphenes can significantly enhance the interlaminar shear properties of carbon fiber reinforced plastics. It improves both mode II interlaminar fracture toughness and interlaminar shear strength, while also sensitively monitoring the delamination process in highly conductive CFRPs.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Thermodynamics

Numerical study on gravity-driven granular flow around tube out-wall: Effect of tube inclination on the heat transfer

Zhigang Guo et al.

Summary: This study investigated the effect of tube inclination on heat transfer in granular flow moving bed heat exchangers using a discrete element method. It was found that tube inclination can improve heat transfer by increasing the heat transfer area, but uncertainties exist in the local heat transfer coefficients. Additionally, different effects were observed at different locations along the tube, with bottom area benefiting from increased heat transfer coefficient and top or middle areas experiencing opposing effects.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Engineering, Electrical & Electronic

MoO3 structures transition from nanoflowers to nanorods and their sensing performances

Li-Bin Hu et al.

Summary: This study investigated the nanostructure transition of alpha-MoO3 induced by annealing temperature, finding that crystallization heavily depends on the annealing temperature. MoO3 nanoflowers can transform into nanosheets at 500 degrees C and subsequently into microrods with the increase in temperature. The MoO3 nanosheets-based sensor showed superior sensing performance to ethanol compared to other nanostructures.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Thermodynamics

Performance evaluation of alumina nanofluids and nanoparticles-deposited surface on nucleate pool boiling phenomena

Mihir Modi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Thermodynamics

Enhancement of pool boiling heat transfer performance using dilute cerium oxide/water nanofluid: An experimental investigation

Mohammed Saad Kamel et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Article Chemistry, Multidisciplinary

One-Step Synthesis of Au@Pt-Graphene Nanocomposites and Their Electrochemical Properties

Jiangtao Liu et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2019)

Article Multidisciplinary Sciences

Electrophoretic Deposition of Graphene Oxide Nanosheets on Copper Pipe for Corrosion Protection

Essam Hares et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)

Review Thermodynamics

Review of pool boiling enhancement with additives and nanofluids

Gangtao Liang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Proceedings Paper Engineering, Multidisciplinary

Influence of surface roughness on pool boiling heat transfer

Avdhoot Walunj et al.

2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2018) (2018)

Article Thermodynamics

Pool Boiling Enhancement through Graphene and Graphene Oxide Coatings

Arvind Jaikumar et al.

HEAT TRANSFER ENGINEERING (2017)

Article Thermodynamics

Scale effects of graphene and graphene oxide coatings on pool boiling enhancement mechanisms

Arvind Jaikumar et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Microscale Morphology Effects of Copper-Graphene Oxide Coatings on Pool Boiling Characteristics

Arvind Jaikumar et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)

Article Thermodynamics

Surface structuring with inclined minichannels for pool boiling improvement

Amir Mirza Gheitaghy et al.

APPLIED THERMAL ENGINEERING (2017)

Article Thermodynamics

Effect of surface roughness on pool boiling heat transfer at a heated surface having moderate wettability

Jinsub Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Article Mechanics

Nucleate boiling in graphene oxide colloids: Morphological change and critical heat flux enhancement

Ji Min Kim et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2016)

Article Chemistry, Multidisciplinary

High Efficiency and Stable Perovskite Solar Cell Using ZnO/rGO QDs as an Electron Transfer Layer

Mohammad Mahdi Tavakoli et al.

ADVANCED MATERIALS INTERFACES (2016)

Article Thermodynamics

Boiling characteristics on the reduced graphene oxide films

Ho Seon Ahn et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Article Thermodynamics

Pool boiling CHF of reduced graphene oxide, graphene, and SiC-coated surfaces under highly wettable FC-72

Han Seo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Article Chemistry, Multidisciplinary

Effects of spray-deposited oxidized multi-wall carbon nanotubes and graphene on pool-boiling critical heat flux enhancement

Sung-Seek Park et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Article Chemistry, Multidisciplinary

Effect of Surface Wettability on Crack Dynamics and Morphology of Colloidal Films

Udita Uday Ghosh et al.

LANGMUIR (2015)

Article Thermodynamics

Effect of a graphene oxide coating layer on critical heat flux enhancement under pool boiling

Ji Min Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Article Thermodynamics

Pool boiling experiments in reduced graphene oxide colloids part II - Behavior after the CHF, and boiling hysteresis

Ho Seon Ahn et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Article Chemistry, Multidisciplinary

Synthesis, characterization and catalytic activity of graphene oxide/ZnO nanocomposites

Mahmoud Nasrollahzadeh et al.

RSC ADVANCES (2014)

Article Thermodynamics

Pool boiling characteristics of nanofluid on flat plate based on heater surface analysis

Zahra Shahmoradi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

Article Thermodynamics

Experimental study of the effect of a reduced graphene oxide coating on critical heat flux enhancement

Ho Seon Ahn et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Article Thermodynamics

Boiling time effect on CHF enhancement in pool boiling of nanofluids

Tomio Okawa et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Article Physics, Applied

Effects of nanofluids containing graphene/graphene-oxide nanosheets on critical heat flux

Sung Dae Park et al.

APPLIED PHYSICS LETTERS (2010)

Article Thermodynamics

Study of bubble growth in water pool boiling through synchronized, infrared thermometry and high-speed video

Craig Gerardi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Article Mechanics

Nucleate boiling heat transfer in aqueous solutions with carbon nanotubes up to critical heat fluxes

Ki-Jung Park et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2009)

Article Thermodynamics

Enhancement of pool boiling critical heat flux in dielectric liquids by microporous coatings

Mehmet Arik et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Article Thermodynamics

Effusivity-based correlation of surface property effects in pool boiling CHF of dielectric liquids

M Arik et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)

Article Thermodynamics

The boiling crisis phenomenon - Part I: nucleation and nucleate boiling heat transfer

TG Theofanous et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2002)

Article Thermodynamics

The boiling crisis phenomenon - Part II: dryout dynamics and burnout

TG Theofanous et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2002)

Article Thermodynamics

A theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation

SG Kandlikar

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2001)