☆ 4.6 Article

Investigation of the structural, electronic and mechanical properties of Ca-SiO2 compound particles in steel based on density functional theory

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Charge compensation effects of alkali metal ions M+ (Li+, Na+, K+) on luminescence enhancement in red-emitting Ca3Si2O7:Eu3+ phosphors

Xi Gao et al.

Summary: Red-emitting phosphors Ca3Si2O7:Eu3+ and Ca3Si2O7:Eu3+, M+ (M = Li, Na, K) were prepared via solid-state reaction, demonstrating improved luminescence intensity and lifetime when co-doped with alkali metal ions M+. These phosphors have potential applications as red components in white light-emitting diodes.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Mg Pretreatment and Ce Addition on Cleanliness and Inclusion Evolution in High-Nitrogen Stainless Bearing Steels

Hao Feng et al.

Summary: In this study, the effect of Mg pretreatment and Ce addition on cleanliness and inclusion evolution in high-nitrogen stainless bearing steels was systematically investigated. The results showed that Mg pretreatment and Ce addition effectively decreased the contents of O and S and changed the composition and evolution process of inclusions. The optimum Mg pretreatment content was found to be between 0.0026 and 0.0040 wt pct.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

First-principles calculation of twin boundary energy and strength/embrittlement in hexagonal close-packed titanium

Jun Hui et al.

Summary: This study used first-principles calculations and tensile tests to investigate the effects of 14 metallic solutes on twin boundaries in Ti alloys. By calculating twin formation energies and examining segregation energy, the study identified how solutes influence twin boundary strength, ultimately determining maximum TB strength.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermodynamic and thermoelectric properties of titanium oxycarbide with metal vacancy

Bao Zhang et al.

Summary: This study demonstrates that introducing metal vacancies can enhance carrier mobility and realize the potential thermoelectric application of titanium oxycarbide.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of ferromanganese additions on non-metallic inclusion characteristics in TRIP steel

Wei-sheng Wang et al.

Summary: The inclusion characteristics in different grades of FeMn alloys and the effect of FeMn alloys on TRIP steel were evaluated. Different grades of FeMn alloys contain different main inclusions, while TRIP steel mainly contains Al2O3, AlN, MnS, etc.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Applied

Experimental and DFT study on cerium inclusions in clean steels

Xiangjun Liu et al.

Summary: By investigating the evolution process of Ce-O-S-Al inclusions in clean steels using thermodynamic calculation, metallographic examination and first-principles calculation, this study provided insights into improving mechanical properties of steels. The research showed that the differences in hardness, toughness, brittleness, and thermal expansion coefficient between Ce inclusions and iron matrix could explain the enhancement of mechanical properties in the tested steel.

JOURNAL OF RARE EARTHS (2021)

添加到收藏夹

Article Chemistry, Physical

Site-Selective Eu3+ Luminescence in the Monoclinic Phase of YSiO2N

Yuuki Kitagawa et al.

Summary: The Eu3+-doped YSiO2N phosphor was synthesized, and its crystal structure was analyzed. The luminescence properties of the Eu3+ ions were characterized, showing different behaviors at different sites. This study provides insights into material design for near-UV excitable red phosphors activated with Eu3+ ions.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Mg and La on the evolution of inclusions and microstructure in Ca-Ti treated steel

Lei Wang et al.

Summary: The evolution of inclusions and the formation of acicular ferrite in Ca-Ti treated steel after Mg and La addition were systematically investigated. The types of inclusions in the molten steel and final quenched samples were similar, but with differences in morphology, where the La-containing sample had the smallest average inclusion size and highest number density. Additionally, the percentage of acicular ferrite increased due to the increase in effective inclusions in the La-containing sample.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-depth analysis of the fatigue mechanism induced by inclusions for high-strength bearing steels

Chao Gu et al.

Summary: The study investigated the stress distribution and fatigue behavior influenced by voids adjacent to inclusions, showing that the effects of inclusions on fatigue life reduce significantly when mechanical properties are similar. Additionally, it was found that the position of voids near inclusions plays a critical role in determining their impact on fatigue behavior.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrahigh cycle fatigue fracture mechanism of high-quality bearing steel obtained through different deoxidation methods

Wei Xiao et al.

Summary: The study investigates the mechanism of oxide inclusions in fatigue crack initiation in the VHCF regime, revealing differences in inclusion types and their effects on fatigue life in Si- and Al-deoxidized steels. Cracks in Al-deoxidized steel are caused by calcium aluminate inclusions, while most fatigue cracks in Si-deoxidized steel are triggered by the inhomogeneity of the steel matrix. The mechanisms of fatigue fracture caused by calcium aluminate and silicate inclusions are analyzed, showing varying impacts on the fatigue life of bearing steels.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic mass variation and multiphase interaction among steel, slag, lining refractory and nonmetallic inclusions: Laboratory experiments and mathematical prediction

Ju-jin Wang et al.

Summary: The mass transfer among the multiphase interactions during the refining process of a bearing steel was studied using laboratory experiments and numerical kinetic prediction. The slag phase was found to significantly accelerate the mass transfer rate, with the system containing slag having a rate approximately 5 times larger than the system without slag. The established kinetic model accurately predicted the composition transformation of inclusions and the mass transfer of magnesium and aluminum in the steel.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chemical Composition Modification of Inclusions in Steels by Controlled Ca Treatment

Chengsong Liu et al.

Summary: This study conducted five plant trials with varying Ca-total/O-total ratios and different Al and S contents in steels to validate thermodynamic model predictions for the liquid window. The results showed good agreement between model predictions and experimental findings, with the window succinctly represented by the ratio of Ca in sulfide inclusions to Ca in oxide inclusions.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Relating matrix stress to local stress on a hard microstructural inclusion for understanding cleavage fracture in high strength steel

Quanxin Jiang et al.

Summary: This study presents analytical equations to quantitatively estimate the stress of microstructural inclusions in high strength steels, which accurately represent the local stress state and are implemented into a multi-barrier model. Finite element modeling and experimental comparisons confirm the reliability of these equations in predicting local stress levels.

INTERNATIONAL JOURNAL OF FRACTURE (2021)

添加到收藏夹

Article Chemistry, Physical

Investigation of structural, electronic, magnetic and mechanical properties of a new series of equiatomic quaternary Heusler alloys CoYCrZ (Z = Si, Ge, Ga, Al): A DFT study

Muhammad Isa Khan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Engineering, Mechanical

Inclusion initiated fracture in spring steel under axial and torsion very high cycle fatigue loading at different load ratios

Ulrike Karr et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Screening Out Reactivity-Promoting Candidates for γ-Ca2SiO4 Carbonation by First-Principles Calculations

Yong Tao et al.

FRONTIERS IN MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Structural, electronic, and mechanical properties of calcium aluminate cements: Insight from first-principles theory

Chongchong Qi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Exploring alloying effect on phase stability and mechanical properties of γ-Ni3Nb precipitates with first-principles calculations

Xiaoguo Gong et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Chemistry, Physical

First-Principles Calculations on Polymorphs of Dicalcium Silicate-Belite, a Main Component of Portland Cement

Pawel Rejmak et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure-based fatigue modelling with residual stresses: Prediction of the microcrack initiation around inclusions

Chao Gu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Microstructure-based fatigue modelling with residual stresses: Prediction of the fatigue life for various inclusion sizes

Chao Gu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Numerical model of inclusion separation from liquid metal with consideration of dissolution in slag

Wei Liu et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Inclusion engineering and metallurgy of calcium treatment

Sunday Abraham et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2018)

添加到收藏夹

Article Physics, Applied

Insight into Structural, Electronic, Magnetic, Mechanical, and Thermodynamic Properties of Actinide Perovskite BaPuO3

Sajad Ahmad Dar et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimizing the performance of the bulk heterojunction organic solar cells based on DFT simulations of their interfacial properties

Sarah A. Ayoub et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Chemistry, Physical

Understanding of the Elastic Constants, Energetics, and Bonding in Dicalcium Silicate Using First-Principles Calculations

S. K. S. Saravana Karthikeyan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

添加到收藏夹

Article Physics, Condensed Matter

First-principle analysis of the structural, mechanical, optical and electronic properties of wollastonite monoclinic polymorph

Shaker J. Edrees et al.

COMPUTATIONAL CONDENSED MATTER (2018)

添加到收藏夹

Article Multidisciplinary Sciences

High-throughput screening of inorganic compounds for the discovery of novel dielectric and optical materials

Ioannis Petousis et al.

SCIENTIFIC DATA (2017)

添加到收藏夹

Article Geosciences, Multidisciplinary

Compressional behavior of MgCr2O4 spinel from first-principles simulation

Zhang YanYao et al.

SCIENCE CHINA-EARTH SCIENCES (2016)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Structural Phase Transformation and Luminescent Properties of Ca2-xSrxSiO4:Ce3+ Orthosilicate Phosphors

Mingyue Chen et al.

INORGANIC CHEMISTRY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Structural, electronic and mechanical properties of alkaline earth metal oxides MO (M=Be, Mg, Ca, Sr, Ba)

A. Jemmy Cinthia et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2015)

添加到收藏夹

Article Engineering, Mechanical

Influence of different non-metallic inclusion types on the crack initiation in high-strength steels in the VHCF regime

D. Spriestersbach et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Article Geochemistry & Geophysics

Natural pseudowollastonite: Crystal structure, associated minerals, and geological context

Yurii V. Seryotkin et al.

LITHOS (2012)

添加到收藏夹

Article Engineering, Mechanical

Microstructure-sensitive modeling of high cycle fatigue

Craig Przybyla et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

添加到收藏夹

Article Materials Science, Ceramics

Structural, Mechanical, and Reactivity Properties of Tricalcium Aluminate Using First-Principles Calculations

Hegoi Manzano et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

添加到收藏夹

Article Physics, Condensed Matter

Calculated elastic properties of M2AlC (M = Ti, V, Cr, Nb and Ta)

ZM Sun et al.

SOLID STATE COMMUNICATIONS (2004)

添加到收藏夹

Article Materials Science, Ceramics

Correlation between elastic properties of wollastonite-based materials and sintering temperature

NI Demidenko et al.

GLASS AND CERAMICS (2003)

添加到收藏夹

Article Chemistry, Multidisciplinary

Simulated annealing structure solution of a new phase of dicalcium silicate Ca2SiO4 and the mechanism of structural changes from α-dicalcium silicate hydrate to αL′-dicalcium silicate via the new phase

H Toraya et al.

ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE (2002)

添加到收藏夹

Article Thermodynamics

FactSage thermochemical software and databases

C Bale et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2002)

添加到收藏夹

Article Physics, Condensed Matter

First-principles simulation: ideas, illustrations and the CASTEP code

MD Segall et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2002)

添加到收藏夹

Article Construction & Building Technology

Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker

K Velez et al.

CEMENT AND CONCRETE RESEARCH (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

The mechanism of brittle fracture in a microalloyed steel: Part I. Inclusion-induced cleavage

DP Fairchild et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.