☆ 4.4 Article

RECYCLING OF ALUMINIUM MATRIX COMPOSITES (AMCS): A REVIEW AND THE WAY FORWARD

INTERNATIONAL JOURNAL OF METALCASTING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

Evaluation of Microstructure and Mechanical Properties of TiO2 Reinforced Aluminium Composites Developed Through Multi-Step Stir Casting

John Samson Khalkho et al.

Summary: This study investigates the effect of TiO2 particles on the microstructure and mechanical properties of AA2014 composites. It is found that TiO2 promotes grain refinement and reacts with Al to form Al2O3, which improves the strength of the composites. The composite sample with 4wt% TiO2 exhibits the best combination of mechanical properties.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites

N. Ramadoss et al.

Summary: This study focuses on improving the mechanical and corrosion properties of aluminium hybrid metal matrix composites (AHMMCs) by using boron carbide (B4C) and boron nitride (BN) as reinforcement particles. The AHMMCs with different weight percentages of B4C and fixed weight percentage of BN were synthesized using the stirring-squeeze cast method. The results show that the microstructure and chemical composition changes significantly improve the performance of the composites, making them potentially useful in automotive and marine applications.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Cooling Rate on the Microstructure and Solidification Characteristics of Al-20%Mg2Si In Situ Composites Using Computer-Aided Thermal Analysis Technique

S. Ashkvary et al.

Summary: The formation, size, and morphology of Mg2Si intermetallics in Al-Mg2Si in situ composites significantly influence the mechanical properties of the alloy. Cooling rate during solidification has a direct impact on the microstructure and characteristics of the reinforcement particles. This study investigated the effect of different cooling rates on the microstructure and solidification parameters of Al-20%Mg2Si in situ composite using cooling curve thermal analysis technique. The results showed that increasing the cooling rate resulted in higher nucleation temperature of primary Mg2Si, binary eutectic, and ternary eutectic, while decreasing the growth temperature of the eutectic reactions. Furthermore, the Mg2Si reinforcement particles changed from coarse dendritic to fine polygonal shape, accompanied by decreased size and increased density.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

A Comparative Assessment on Microstructure, Mechanical and Tribological Behaviour of Light Aluminium-Trialuminide Composites

G. Gautam et al.

Summary: In this study, different trialuminides were prepared via direct melt reaction route and their effects on the microstructure, mechanical and tribological properties of the Al-Mg alloy were investigated. The results showed that the trialuminides improved the strength, ductility, hardness and anti-wear life of the alloy, with the trialuminide of Ti exhibiting the best performance. Additionally, the trialuminides reduced the surface roughness and wear depth, with the composite containing the trialuminide of Ti having the lowest values.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and Mechanical Properties of an In Situ Al 356-Mg2Si-TiB2 Hybrid Composite Prepared by Stir and Cooling Slope Casting

Amit Kumar Yadav et al.

Summary: In this study, the cooling slope (CS) casting process was used to fabricate in situ Al 356-10%Mg2Si-3%TiB2 hybrid composite. The CS casting process led to the refinement of the matrix and Mg2Si phase, and the uniform distribution of reinforced particles enhanced the mechanical behavior of the composite. The results showed improved tensile strength, ductility, and hardness compared to stir casting, as well as increased tensile strength compared to the Al 356 alloy and Al 356-Mg2Si composite.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

FABRICATION AND CHARACTERIZATION OF HYBRID ALUMINIUM (Al6061) METAL MATRIX COMPOSITE REINFORCED WITH SiC, B4C AND MoS2 VIA STIR CASTING

Ayalew Abebe Emiru et al.

Summary: This work focuses on the fabrication and characterization of hybrid aluminium Al6061 alloy metal matrix composites reinforced with MoS2, SiC and B4C. The study investigates the influence of different weight percentages of these reinforcements on the physical, mechanical, tribological and morphological behavior of the composites. The results show that the addition of SiC and MoS2 increases the density of the composite, while increasing the weight percentage of B4C improves the hardness and ultimate tensile strength. The tribology study reveals that the wear performance of hybrid composites is better than non-reinforced specimens, with wear debris and delamination wear being the dominant wear mechanisms.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The Effect of Electroless Ni-P-Coated Al2O3 on Mechanical and Tribological Properties of Scrap Al Alloy MMCs

P. Chandrasekar et al.

Summary: In this research, Al alloy metal matrix composites reinforced with electroless Ni-P-coated Al2O3 particles were fabricated using the stir-squeeze casting method. The results showed that the addition of coated Al2O3 particles significantly reduced porosity and improved mechanical properties such as hardness, tensile strength, and impact strength. The composite also exhibited reduced specific wear rate and coefficient of friction compared to the as-cast scrap Al alloy. However, the addition of uncoated Al2O3 particles decreased compressive strength.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Investigation of Microstructure and Mechanical Properties of Cast Al-10Zn-3.5Mg-2.5Cu Nanocomposite Reinforced with Graphene Nano Sheets Produced by Ultrasonic Assisted Stir Casting

Mohammad Alipour et al.

Summary: The microstructure and mechanical properties of aluminum alloy Al-10Zn-3.5Mg-2.5Cu/graphene nanoplates composites produced by ball milling and stir casting were investigated. The addition of dispersed graphene nanoplates with high specific surface area significantly increased the strength of the composites. Tensile tests showed that the addition of graphene nanoplates increased the ultimate tensile strength. Heat treatment at T6 condition further improved the strength of the samples.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

POST-PROCESSING OF STIR CASTED Al-Si12Cu METAL MATRIX COMPOSITE BY FRICTION STIR PROCESSING

Vipin Sharma et al.

Summary: Friction stir processing was applied as a post-processing operation on stir casted metal matrix composites using zircon sand particles in an Al-Si12Cu alloy matrix. Multiple passes of friction stir processing resulted in significant improvement in microstructure, reducing the size of zircon sand particles. After four passes, the metal matrix composite showed a significant increase in ultimate tensile strength, yield strength, percentage elongation, and hardness compared to the initial cast metal matrix composite.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Recycling of Aluminum Chips in Die Casting Foundry

M. Bhaskar et al.

Summary: The article discusses how to effectively recover aluminum from aluminum alloy chips with maximum metal recovery and minimum melting loss. Different techniques, such as using flux, different melting furnaces, and different melting temperatures, are studied for this purpose.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of External Pressure on the Microstructure and Mechanical Properties of In Situ (ZrB2+Al2O3/Al3Zr)/6016 Nanocomposites

Soban Muddassir Dar et al.

Summary: In this study, the effect of external pressure on the microstructure and mechanical properties of in situ (ZrB2+Al2O3/Al3Zr)/6016 composites synthesized under an electromagnetic field was investigated. It was found that the application of external pressure can lead to improved uniformity, reduced grain size, and inhibited growth of reinforcement particles, resulting in enhanced strength and hardness of the composites.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

添加到收藏夹

Article Chemistry, Physical

Experimental Investigations on Microstructure, Properties and Workability Behavior of Zinc Oxide Reinforced Al-Si-Mg Matrix Composites

R. M. Sakthi Sadhasivam et al.

Summary: The study focuses on developing Al-Si-Mg alloy composites reinforced with ZnO microparticles, characterizing them using SEM, EDS, and X-RD, analyzing their mechanical properties and workability behavior. The results show that the addition of ZnO particles can enhance the mechanical properties of the composites.

SILICON (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of Speed and Sliding Distance on the Tribological Performance of Submicron Particulate Reinforced Al-12Si /1.5 Wt% B4C Composite

Deepak M. Shinde et al.

Summary: The study investigates the wear and friction performance of Al-12Si aluminum alloy reinforced with 1.5 wt% submicron boron carbide (B4C) particles. Results show that the dispersion of B4C particles in the aluminum matrix enhances wear resistance of the composite material. The wear mechanism is primarily influenced by adhesion and delamination in the base alloy, while the mechanically mixed layer plays a key role in the wear performance of the composite matrix.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Process Optimization and Studies on Mechanical Characteristics of AA2014/Al2O3 Nanocomposites Fabricated Through Ultrasonication Assisted Stir-Squeeze Casting

A. Gnanavelbabu et al.

Summary: The study investigated the impact of novel ultrasonic-assisted squeeze casting parameters on the fabrication of AA2014/Al2O3 nanocomposites using the Taguchi Grey response surface methodology. By conducting experiments and analysis, the optimal parameter settings were determined and correlation studies and optimization methods were proposed.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effect of multiple remelting on behaviour of AlSi5Cu3 Aluminium alloy

R. P. Barot et al.

Summary: This study investigated the microstructural behavior and mechanical properties of AlSi5Cu3 alloy after multiple remelting. The results showed that the number of grains decreased gradually after the 2nd and 3rd remelting, leading to variations in mechanical properties. The hardness and ultimate tensile strength were found to decrease after each remelting process, indicating a minor variation in the alloy's behavior.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effect of casting thickness on mechanical properties of AlSi5Cu3 Aluminium alloy

R. P. Barot et al.

Summary: The present paper investigates the influence of casting thickness on the mechanical properties of AlSi5Cu3 Aluminium alloy. The results show that a lower thickness leads to a more refined grain structure, resulting in improved tensile strength and hardness.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The Effects of Rotary Degassing Treatments on the Melt Quality of an Al-Si Casting Alloy

Gabor Gyarmati et al.

Summary: The study compared the effects of rotary degassing treatments with and without flux addition on the melt cleanliness. Results showed that rotary degassing coupled with flux addition is an effective technique for inclusion and solute hydrogen removal, improving melt quality significantly. Conversely, rotary degassing without flux addition may increase inclusion content in melts, possibly due to a chemical reaction between the liquid alloy and the N-2 purging gas during the degassing process.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Iron Reduction in 356 Secondary Aluminum Alloy by Mn and Cr Addition for Sediment Separation

Annadurai Dhinakar et al.

Summary: A process for reducing iron content in 356 secondary aluminum alloy was developed in this study, utilizing alloy additions to remove Fe-rich intermetallic compounds. It was found that optimum iron removal conditions involved adding 1 wt% Mn and 1 wt% Cr, which could remove 73.8% of Fe and recover 77.3% of the secondary alloy via gravity separation method.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

CHARACTERISTICS OF DYNAMICALLY FORMED OXIDE FILMS IN Al-Zn MELT

Nader Taheri Bagh et al.

Summary: The study used the OMO sandwich technique to simulate the formation of surface oxide films and found that higher zinc content resulted in more cracks on the oxide films, while adding more than 3% zinc reduced the thickness of the oxide films. The presence of spinel phase at the interface is believed to be the reason behind the reduction in oxide film thickness.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Al2O3Particle Size on Mechanical Properties of Ultrasonic-Assisted Stir-Casted Al A356 Matrix Composites

Ugur Aybarc et al.

Summary: Aluminum A356 alloy matrix composites reinforced with different fractions of Al(2)O(3) particles of two different sizes were produced and examined for their mechanical properties. The addition of 0.5 wt% nano-Al(2)O(3) resulted in the highest ultimate tensile strength and elongation among all compositions, with improvements in UTS and impact energy compared to the reference sample. Quality index calculations showed that 0.5 wt% nano-Al(2)O(3) addition yielded the optimum properties.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effect of ZrB2 on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route

S. Dinesh Kumar et al.

Summary: A new class of aluminium alloy matrix composites reinforced with ZrB2 particles was developed using the bottom pouring type stir casting process. The addition of ZrB2 particles improved the mechanical and corrosion behaviors of the composites. Through electrochemical assessments and SEM analysis, the homogeneous distribution of ZrB2 particles and the enhanced corrosion resistance of the composites were demonstrated.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Comparative Evaluation of Ex Situ and In Situ Method of Fabricating Aluminum/TiB2 Composites

V. S. Ayar et al.

Summary: The present study investigated the fabrication of Al-TiB2 composites using in situ and ex situ methods, focusing on the effect of processing temperature on the formation of titanium diboride particles. Comparative evaluation of the two methods was conducted, along with an analysis of various process parameters on mechanical properties. The results indicated that in situ composites exhibited a more homogeneous distribution of particles and higher mechanical properties compared to ex situ composites.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Synthesis and Characterization of Aa2024-Sio2 Nanocomposites Through the Vortex Method

Mehrdad Shayan et al.

Summary: In this study, AA2024-SiO2np nanocomposites were prepared using the vortex method, and the effects of SiO2 content on microstructural and mechanical properties were investigated. The addition of 0.5vol% of nanoparticles improved mechanical properties significantly, but increased nanoparticle agglomeration at higher concentrations led to a decrease in mechanical performance of the composite.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Manufacturing Methodology on Casting-Based Aluminium Matrix Composites: Systematic Review

Jose Grilo et al.

Summary: This study systematically reviews aluminum-based metal matrix composites, highlighting the impact of particle pre-processing and melt treatment on the final mechanical properties through a structured analysis of the literature.

METALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aluminum Recovery from White Aluminum Dross by a Mechanically Activated Phase Separation and Remelting Process

Artur Kudyba et al.

Summary: Aluminum recovery from white aluminum dross was achieved through a mechanical treatment and remelting process, with the larger particles found to contain high metallic portions. The method proved to be a good economic alternative for aluminum recovery from white dross, demonstrating the potential for valorization/recycling of industrial waste and circular economy principles.

JOM (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Wettability in Metal Matrix Composites

Massoud Malaki et al.

Summary: This paper critically reviews and comprehensively discusses the common approaches used to enhance wetting conditions at reinforcement-matrix interfaces in metal matrix composites. Special attention is given to the enhancement of mechanical properties in aluminum matrix composites for lightweight materials. It is believed that effective treatment methods can greatly influence wetting and interfacial strength.

METALS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The Metallurgy of Aluminum Alloys for Structural High-Pressure Die Castings

Geoffrey K. Sigworth et al.

Summary: Aluminum alloys for high-pressure die casting often have enough dissolved iron to reduce die wear and soldering, but this reduces ductility in the final product. Recent improvements in machine design and new alloys have enabled the production of high ductility, structural HPDC components. This paper details the chemical and metallurgical factors contributing to this development.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

添加到收藏夹

Review Materials Science, Composites

Composite Material Recycling Technology-State-of-the-Art and Sustainable Development for the 2020s

Andrey E. Krauklis et al.

Summary: The recent events, such as the ban on composite landfilling in Germany, decommissioning of composite wind turbines, acceleration of aircraft decommissioning, and increase of composites in mass production cars have significantly increased the pressure for developing sustainable composite recycling solutions. The authors of the study propose that identifying optimal recycling methods for various types of fiber reinforced composites is crucial for the future. The manuscript provides a comprehensive overview of recycling technologies for fiber reinforced composites at both low and high Technology Readiness Levels, aiming to guide the sustainable development of the industry and benefit the society.

JOURNAL OF COMPOSITES SCIENCE (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Development and Characterization of In Situ AlSi5Cu3/TiB2 Composites

V. S. Ayar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of TiB2 on the Corrosion Resistance Behavior of In Situ Al Composites

P. Senthil Kumar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities

Ajay P. Kumar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

A New Insight to Dynamic Oxidation of Molten Metals by the Parametric Study of Oxide/Metal/Oxide Sandwich Formation

Mohammad Mahdi Jalilvand et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

A Simple Procedure to Determine Incoming Quality of Aluminum Alloy Ingots and Its Application to A356 Alloy Ingots

Eray Erzi et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

添加到收藏夹

Article Chemistry, Physical

Efficient separation of reinforcements and matrix alloy from aluminum matrix composites by supergravity technology

Ningjie Sun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Review Materials Science, Composites

Metal matrix production: Casting of recycled aluminum cans and incorporation of rice husk ash and magnesium

Gilson Gilmar Holzschuh et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Solidification Processing of Cast Metal Matrix Composites Over the Last 50 Years and Opportunities for the Future

Pradeep K. Rohatgi et al.

JOM (2020)

添加到收藏夹

Article Engineering, Chemical

Statistical Optimization by the Response Surface Methodology of Direct Recycled Aluminum-Alumina Metal Matrix Composite (MMC-AlR) Employing the Metal Forming Process

Azlan Ahmad et al.

PROCESSES (2020)

添加到收藏夹

Article Engineering, Manufacturing

Processing, Properties, and Microstructure of Recycled Aluminum Alloy Composites Produced Through an Optimized Stir and Squeeze Casting Processes

John Victor Christy et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Casting simulation and defect identification of geometry varied plates with experimental validation

R. P. Barot et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and Mechanical Properties of an AlN/Mg-Al Composite Synthesized by Al-AlN Master Alloy

Zengqiang Li et al.

INTERNATIONAL JOURNAL OF METALCASTING (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Advanced Metal Matrix Nanocomposites

Massoud Malaki et al.

METALS (2019)

添加到收藏夹

Article Chemistry, Physical

Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties

Pradeep Kumar Krishnan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical properties of in-situ nano γ-Al2O3p/A356 aluminum matrix composite

Tuo Xu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Phase Evolution of -Al5FeSi During Recycling of Al-Si-Fe Alloys by Mg Melt

Tong Gao et al.

INTERNATIONAL JOURNAL OF METALCASTING (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

COMPLEXITIES IN THE ASSESSMENT OF MELT QUALITY

Martin Riestra et al.

INTERNATIONAL JOURNAL OF METALCASTING (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

EFFECTS OF ELECTROMAGNETIC FREQUENCY AND SIC NANOPARTICLES ON THE MICROSTRUCTURE REFINEMENT AND MECHANICAL PROPERTIES OF Al A357-1.5 WT% SIC NANOCOMPOSITES

Reza Mohammadi Badizi et al.

INTERNATIONAL JOURNAL OF METALCASTING (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

ON THE INTERPRETATION OF MELT QUALITY ASSESSMENT OF A356 ALUMINUM ALLOY BY THE REDUCED PRESSURE TEST: THE BIFILM INDEX AND ITS PHYSICAL MEANING

Muhammet Uludag et al.

INTERNATIONAL JOURNAL OF METALCASTING (2018)

添加到收藏夹

Article Engineering, Mechanical

Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties

R. Jojith et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Particle-Reinforced Aluminum Matrix Composites (AMCs)-Selected Results of an Integrated Technology, User, and Market Analysis and Forecast

Anja Schmidt et al.

METALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recycling of Aluminum Alloy from Al-Cu Metal Matrix Composite Reinforced with SiC Particulates

Ashutosh Sharma et al.

KOREAN JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and Fatigue Life of the A359 Alloy Reinforced with Al2O3 after Multiple Remelting

K. Pietrzak et al.

ARCHIVES OF FOUNDRY ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Physical

Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide

K. Ravi Kumar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Engineering, Mechanical

Wear and Friction of AA5052-Al3Zr In Situ Composites Synthesized by Direct Melt Reaction

Gaurav Gautam et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

INCLUSION DETECTION IN MOLTEN ALUMINUM: CURRENT ART AND NEW AVENUES FOR IN SITU ANALYSIS

Shaymus W. Hudson et al.

INTERNATIONAL JOURNAL OF METALCASTING (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Mechanical Properties and Microstructure of Recycled Aluminum Cast with Zinc and Copper Additions

Jamiu Kolawole Odusote et al.

INTERNATIONAL JOURNAL OF METALCASTING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wear Resistance of Aluminum Matrix Composites Reinforced with Al2O3 Particles After Multiple Remelting

Adam Klasik et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure-property analysis of ZrB2/6061Al hierarchical nanocomposites fabricated by direct melt reaction

Rui Yang et al.

MATERIALS CHARACTERIZATION (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

FATIGUE LIFE AND MICROSTRUCTURE AFTER MULTIPLE REMELTING OF A359 MATRIX COMPOSITES REINFORCED WITH SIC PARTICLES

A. Klasik et al.

ARCHIVES OF METALLURGY AND MATERIALS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aluminum-Based Cast In Situ Composites: A Review

S. L. Pramod et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure of High-Performance Pure Al/Nano-Si3N4 Composites

F. He et al.

International Journal of Metalcasting (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Properties of AlSi9Mg Alloy Matrix Composite Reinforced with Short Carbon Fibre after Remelting

M. Lagiewka et al.

ARCHIVES OF FOUNDRY ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Abrasive Wear Behavior of In Situ TiC Reinforced with Al-4.5%Cu Matrix

Anand Kumar et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Simultaneously increasing the strength and ductility of nano-sized TiN particle reinforced Al-Cu matrix composites

Dongshuai Zhou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Chemistry, Physical

Thermodynamic Analysis for the Refining Ability of Salt Flux for Aluminum Recycling

Takehito Hiraki et al.

MATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of re-melting on particle distribution and interface formation in SIC reinforced 2124Al matrix composite

Durbadal Mandal et al.

MATERIALS CHARACTERIZATION (2013)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Forming Behaviour of Al-TIC In-situ Composites

Ram Naresh Rai et al.

LIGHT METALS TECHNOLOGY 2013 (2013)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Recycling of Al-W-B composite material

A. Shishkin et al.

ENGINEERING MATERIALS AND TRIBOLOGY (2013)

添加到收藏夹

Article Energy & Fuels

Recycling of composite materials

Yongxiang Yang et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2012)

添加到收藏夹

Article Chemistry, Physical

Production of in situ aluminum-titanium diboride master alloy formed by slag-metal reaction

Ahmad Changizi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Changes in properties of aluminium matrix composite reinforced with SiC particles after multiple remelting

A. Klasik et al.

MATERIALS RESEARCH INNOVATIONS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of SiC-Particles-Shielded Al Spheres upon Recycling Al/SiC Composites

D. Madarasz et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of TiAl3 particles size and distribution on their settling and dissolution behaviour in aluminium

G. S. Vinod Kumar et al.

JOURNAL OF MATERIALS SCIENCE (2010)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

GRAIN REFINEMENT OF ALUMINUM CASTING ALLOYS

Geoffrey K. Sigworth et al.

INTERNATIONAL JOURNAL OF METALCASTING (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Separation of matrix alloy and reinforcement from aluminum metal matrix composites scrap by salt flux addition

K. R. Ravi et al.

BULLETIN OF MATERIALS SCIENCE (2007)

添加到收藏夹

Article Materials Science, Composites

Formation of TiB2 particles during dissolution of TiAl3 in Al-TiB2 metal matrix composite using an in situ technique

M Emamy et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Closed recycling process for Al-based composite materials

H Sano et al.

MATERIALS TRANSACTIONS (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interfacial reaction of Al matrix composites reinforced with TiO2-coated SiC particles during remelting

GA Yang et al.

MATERIALS LETTERS (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chemical reaction in Al matrix composite reinforced with SiCp coated by SnO2

G Yang et al.

JOURNAL OF MATERIALS SCIENCE (2004)

添加到收藏夹

Article Engineering, Chemical

Aluminum metal-matrix composites for automotive applications: tribological considerations

SV Prasad et al.

TRIBOLOGY LETTERS (2004)

添加到收藏夹

Article Engineering, Industrial

Recycling of aluminium alloy and aluminium matrix composite chips by pressing and hot extrusion

JB Fogagnolo et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

添加到收藏夹

Article Engineering, Industrial

Fabrication of in situ Al2O3/Al composite via remelting

TX Fan et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Kinetics of in-situ formation of AlN in Al alloy melts by bubbling ammonia gas

QJ Zheng et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)

添加到收藏夹

Article Engineering, Manufacturing

Chemical reaction of SiCp/Al composites during multiple remelting

TX Fan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of current Mg concentration on interfacial reactions during remelting of Al-Mg(5083)/Al2O3p composites

WM Zhong et al.

MATERIALS CHARACTERIZATION (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Ti upon the interfacial reaction in SiCp/Al composites during multiple remelting above the liquidus

TX Fan et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

An in situ method to evaluate the interfacial reaction during multiple remelting

TX Fan et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Metal-matrix composites for space applications

S Rawal

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.