相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Extracting plastic properties from in-plane displacement data of spherical indentation
Yewon Hwang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
A new methodology for measuring residual stress using a modified Berkovich nano-indenter
Alessia Greco et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Experiment and non-local crystal plasticity finite element study of nanoindentation on Al-8Ce-10Mg alloy
Jiahao Cheng et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)
Nanomechanical Characterization of the Deformation Response of Orthotropic Ti-6Al-4V
Carlos Rojas-Ulloa et al.
ADVANCED ENGINEERING MATERIALS (2021)
Effects of particle distribution and calculation method on results of nano-indentation technique in heterogeneous nanocomposites-experimental and numerical approaches
M. Heidari et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)
A strategy for synthetic microstructure generation and crystal plasticity parameter calibration of fine-grain-structured dual-phase steel
Wenqi Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Inverse identification of cell-wall material properties of closed-cell aluminum foams based upon Vickers nano-indentation tests
Guangyong Sun et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Identifiability of single crystal plasticity parameters from residual topographies in Berkovich nanoindentation on FCC nickel
E. Renner et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
A robust inverse analysis method for elastoplastic behavior identification using the true geometry modeling of Berkovich indenter
Cesar-Moises Sanchez-Camargo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Improvement of indentation technique for measuring general biaxial residual stresses in austenitic steels
R. Moharrami et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
A robust method for mechanical characterization of heterogeneous materials by nanoindentation grid analysis
Cesar-Moises Sanchez-Camargo et al.
MATERIALS & DESIGN (2020)
Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg
Juan Guillermo Santos Macias et al.
ACTA MATERIALIA (2020)
Experiment characterization and formulation estimation of tensile properties for selective laser melting manufactured 304L stainless steel
Tan Pan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of reinforcement shape on fracture behaviour of SiC/Al composites with network architecture
Xiang Gao et al.
COMPOSITE STRUCTURES (2019)
Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions
Lv Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing
Juan Guillermo Santos Macias et al.
SCRIPTA MATERIALIA (2019)
3D micromechanical simulation of the mechanical behavior of an in-situ Al3Ti/A356 composite
Siming Ma et al.
COMPOSITES PART B-ENGINEERING (2019)
Brinell indentation behavior of the stainless steel X2CrNi18-9: Modeling and experiments
A. Bahri et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Assessment of Nano-Indentation Method in Mechanical Characterization of Heterogeneous Nanocomposite Materials Using Experimental and Computational Approaches
A. Karimzadeh et al.
SCIENTIFIC REPORTS (2019)
High temperature nano-indentation of tungsten: Modelling and experimental validation
Xiazi Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Tensile behavior in selective laser melting
Cesar Ortiz Rios et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Simulations of deformation and damage processes of SiCp/Al composites during tension
J. F. Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Finite element modeling of nanoindentation response of elastic fiber-matrix composites
Pengfei Duan et al.
JOURNAL OF MATERIALS RESEARCH (2018)
A combined inverse finite element - elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale
X. Chen et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
An investigation into the depth and time dependent behavior of UV cured 3D ink jet printed objects
X. Chen et al.
JOURNAL OF MATERIALS RESEARCH (2017)
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Naor Elad Uzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Indentation Pileup Behavior of Ti-6Al-4V Alloy: Experiments and Nonlocal Crystal Plasticity Finite Element Simulations
Fengbo Han et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element
J. I. V. de Sena et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2016)
Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction
Dong-Kyu Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Three-dimensional stress and strain around real shape Si particles in cast aluminum alloy under cyclic loading
Masaki Teranishi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Determining individual phase properties in a multi-phase Q&P steel using multi-scale indentation tests
G. Cheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical and real microstructure behavior analysis of particulate-reinforced nanocomposite considering debonding damage based on cohesive finite element method
J. Nafar Dastgerdi et al.
COMPOSITE STRUCTURES (2015)
A combined experimental-numerical approach for determining mechanical properties of aluminum subjects to nanoindentation
Mao Liu et al.
SCIENTIFIC REPORTS (2015)
Finite element simulation of nano-indentation experiment on aluminum 1100
A. Karimzadeh et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Finite element simulation of nanoindentation tests using a macroscopic computational model
Mourad Khelifa et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2014)
Numerical comparison between Berkovich and conical nano-indentations: Mechanical behaviour and micro-texture evolution
Mao Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Determination of the plastic properties of materials treated by ultrasonic surface rolling process through instrumented indentation
Yu Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Finite element method-assisted acquisition of the matrix influence on the indentation results of an embedded hard phase
F. Poehl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations
Carlos Felipe Guzman et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Orientation informed nanoindentation of α-titanium: Indentation pileup in hexagonal metals deforming by prismatic slip
Claudio Zambaldi et al.
JOURNAL OF MATERIALS RESEARCH (2012)
Material behavior of the hexagonal alpha phase of a titanium alloy identified from nanoindentation tests
A. F. Gerday et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2011)
Numerical and experimental indentation tests considering size effects
E. Harsono et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation
M. K. Khan et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
Multi-scale computational homogenization: Trends and challenges
M. G. D. Geers et al.
JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS (2010)
Effects of random particle dispersion and size on the indentation behavior of SiC particle reinforced metal matrix composites
Recep Ekici et al.
MATERIALS & DESIGN (2010)
Nanoindentation in elastoplastic materials: insights from numerical simulations
Steven W. Moore et al.
INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2010)
Interests and limitations of nanoindentation for bulk multiphase material identification: Application to the β phase of Ti-5553
A. F. Gerday et al.
ACTA MATERIALIA (2009)
Determination of material properties using nanoindentation and multiple indenter tips
C. Heinrich et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
The contributions of David Tabor to the science of indentation hardness
Ian M. Hutchings
JOURNAL OF MATERIALS RESEARCH (2009)
Cohesive modeling of dewetting in particulate composites: micromechanics vs. multiscale finite element analysis
H. M. Inglis et al.
MECHANICS OF MATERIALS (2007)
Identification of elastic-plastic anisotropic parameters using instrumented indentation and inverse analysis
Toshio Nakamura et al.
MECHANICS OF MATERIALS (2007)
A numerical study of factors affecting the characterization of nanoindentation on silicon
Tong Hong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Crystal plasticity finite element simulations of pyramidal indentation in copper single crystals
O. Casals et al.
ACTA MATERIALIA (2007)
On the determination of spherical nanoindentation stress-strain curves
Sandip Basu et al.
JOURNAL OF MATERIALS RESEARCH (2006)
Grid indentation analysis of composite microstructure and mechanics: Principles and validation
G. Constantinides et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Nanoindentation studies of materials
Christopher A. Schuh
MATERIALS TODAY (2006)
Representative strain of indentation analysis
N Ogasawara et al.
JOURNAL OF MATERIALS RESEARCH (2005)
Determination of elastic and plastic material properties using indentation: Development of method and application to a thin surface coating
LM Farrissey et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Hardness and yield strength of dentin from simulated nano-indentation tests
M Toparli et al.
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE (2005)
Simulation of instrumented indentation and material characterization
KK Tho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Material characterization based on dual indenters
S Swaddiwudhipong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Determination of the matrix in situ flow stress of a continuous fibre reinforced metal matrix composite using instrumented indentation
JL Bucaille et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
A new technique to determine the elastoplastic properties of thin metallic films using sharp indenters
JL Bucaille et al.
THIN SOLID FILMS (2004)
Scaling, dimensional analysis, and indentation measurements
YT Cheng et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Nanomechanical characterisation of solid surfaces and thin films
B Bhushan et al.
INTERNATIONAL MATERIALS REVIEWS (2003)
Determination of plastic properties of metals by instrumented indentation using different sharp indenters
JL Bucaille et al.
ACTA MATERIALIA (2003)
A numerical approximation to the elastic properties of sphere-reinforced composites
J Segurado et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
Computational modeling of the forward and reverse problems in instrumented sharp indentation
M Dao et al.
ACTA MATERIALIA (2001)
Correlation between tensile and indentation behavior of particle-reinforced metal matrix composites: An experimental and numerical study
YL Shen et al.
ACTA MATERIALIA (2001)
Indentation modelling of heterogeneous materials
YL Shen et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2001)