相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Parametric study on interfacial crack propagation in solid oxide fuel cell based on electrode material
Jiamiao Xie et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Phase-field framework with constraints and its applications to ductile fracture in polycrystals and fatigue
Fei Xue et al.
NPJ COMPUTATIONAL MATERIALS (2022)
Fracture properties of porous yttria-stabilized zirconia under micro-compression testing
A. Abaza et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)
Multiphysics modeling of SOFC performance degradation caused by interface delamination and active layer cracking
Tao Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Quantifying morphological variability and operating evolution in SOFC anode microstructures
Rubayyat Mahbub et al.
JOURNAL OF POWER SOURCES (2021)
Degradation of solid oxide electrolysis cells: Phenomena, mechanisms, and emerging mitigation strategies-A review
Yi Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
A framework to model the fatigue behavior of brittle materials based on a variational phase-field approach
P. Carrara et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
An energy approach to the solution of partial differential equations in computational mechanics via machine learning: Concepts, implementation and applications
E. Samaniego et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Stress Analysis of the Steam-Side Oxide of Boiler Tubes: Contributions from Thermal Strain, Interface Roughness, Creep, and Oxide Growth
Fei Xue et al.
OXIDATION OF METALS (2020)
A ductile phase -field model based on degrading the fracture toughness: Theory and implementation at small strain
Bo Yin et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Thermo-mechanical stress analyses of solid oxide fuel cell anode based on three-dimensional microstructure reconstruction
Yu Xiang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Adaptive fourth-order phase field analysis using deep energy minimization
Somdatta Goswami et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Phase-field models for fatigue crack growth
A. Mesgarnejad et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
A two-set order parameters phase-field modeling of crack deflection/penetration in a heterogeneous microstructure
Hu Chen et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Diffuse interface approach to modeling crystal plasticity with accommodation of grain boundary sliding
Tian-Le Cheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Conditions for stable operation of solid oxide electrolysis cells: oxygen electrode effects
Beom-Kyeong Park et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Phase field modeling of quasi-static and dynamic crack propagation: COMSOL implementation and case studies
Shuwei Zhou et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
An efficient approach for prediction of Warburg-type resistance under working currents
Tao Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Activation and failure mechanism of La0.6Sr0.4Co0.2Fe08O3-delta air electrode in solid oxide electrolyzer cells under high-current electrolysis
Zehua Pan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Effects of applied current density and thermal cycling on the degradation of a solid oxide fuel cell cathode
Muhammad Zubair Khan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Modelling of anode delamination in solid oxide electrolysis cell and analysis of its effects on electrochemical performance
Marko Nerat et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
23,000 h steam electrolysis with an electrolyte supported solid oxide cell
Josef Schefold et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Modeling elasto-viscoplasticity in a consistent phase field framework
Tian-Le Cheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Phase field modeling of microstructure evolution and concomitant effective conductivity change in solid oxide fuel cell electrodes
Yinkai Lei et al.
JOURNAL OF POWER SOURCES (2017)
Modeling of an anode supported solid oxide fuel cell focusing on thermal stresses
Min Xu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Meso-Scale Phase-Field Modeling of Microstructural Evolution in Solid Oxide Fuel Cells
Taufiq Abdullah et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Phase-field modeling of ductile fracture
M. Ambati et al.
COMPUTATIONAL MECHANICS (2015)
Comparison of performance and degradation of large-scale solid oxide electrolysis cells in stack with different composite air electrodes
Yifeng Zheng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Numerical thermomechanical modelling of solid oxide fuel cells
Murat Peksen
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2015)
A review on phase-field models of brittle fracture and a new fast hybrid formulation
Marreddy Ambati et al.
COMPUTATIONAL MECHANICS (2015)
Enhancing SOFC cathode performance by surface modification through infiltration
Dong Ding et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
3D transient multiphysics modelling of a complete high temperature fuel cell system using coupled CFD and FEM
M. Peksen
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
SOFC Durability against Standby and Shutdown Cycling
M. Hanasaki et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
Degradation mechanism of electrolyte and air electrode in solid oxide electrolysis cells operating at high polarization
Jeonghee Kim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Mitigation of the delamination of LSM anode in solid oxide electrolysis cells using manganese-modified YSZ
Na Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells
Philippe Mocoteguy et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Application of solid oxide fuel cell technology for power generation-A review
Arnab Choudhury et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
A model for the delamination kinetics of La0.8Sr0.2MnO3 oxygen electrodes of solid oxide electrolysis cells
Yanxiang Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
LSM-YSZ interactions and anode delamination in solid oxide electrolysis cells
Michael Keane et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
A review of modeling and simulation techniques across the length scales for the solid oxide fuel cell
Kyle N. Grew et al.
JOURNAL OF POWER SOURCES (2012)
A quantitative and thermodynamically consistent phase-field interpolation function for multi-phase systems
Nele Moelans
ACTA MATERIALIA (2011)
A time-discrete model for dynamic fracture based on crack regularization
Blaise Bourdin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2011)
Failure mechanism of (La,Sr)MnO3 oxygen electrodes of solid oxide electrolysis cells
Kongfa Chen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits
Christian Miehe et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells
Anil V. Virkar
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Fast performance degradation of SOFC caused by cathode delamination in long-term testing
Kwangjin Park et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Modeling of thermal stresses and lifetime prediction of planar solid oxide fuel cell under thermal cycling conditions
Lin Liu et al.
JOURNAL OF POWER SOURCES (2010)
Influence of Oxide Growth and Metal Creep on Strain Development in the Steam-Side Oxide in Boiler Tubes
Adrian S. Sabau et al.
OXIDATION OF METALS (2010)
Post-test evaluation of oxygen electrodes from solid oxide electrolysis stacks
Jennifer R. Mawdsley et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Solid Oxide Fuel Cells damage mechanisms due to Ni-YSZ re-oxidation: Case of the Anode Supported Cell
J. Laurencin et al.
JOURNAL OF POWER SOURCES (2009)
Regularized formulation of the variational brittle fracture with unilateral contact: Numerical experiments
Hanen Amor et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2009)
Thermal, micro-structural, and electrical properties of a La1-x Sr x Mn0.85Fe0.05Co0.05Ni0.05O3+δ (x=0-0.4 mole) cathode system
Ravindra Kumar Gupta et al.
METALS AND MATERIALS INTERNATIONAL (2009)
Oxidation failure modes of anode-supported solid oxide fuel cells
D. Sarantaridis et al.
JOURNAL OF POWER SOURCES (2008)
Fundamental mechanisms limiting solid oxide fuel cell durability
Harumi Yokokawa et al.
JOURNAL OF POWER SOURCES (2008)
Effective modulus and coefficient of thermal expansion of Ni-YSZ porous cermets
Janine Johnson et al.
JOURNAL OF POWER SOURCES (2008)
Microstructural design and mechanical properties of porous silicon nitride ceramics
Tatsuki Ohji
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Cycling of three solid oxide fuel cell types
Waldemar Bujalski et al.
JOURNAL OF POWER SOURCES (2007)
Redox cycling of Ni-based solid oxide fuel cell anodes: A review
D. Sarantaridis et al.
FUEL CELLS (2007)
Non-destructive delamination detection in solid oxide fuel cells
J. I. Gazzarri et al.
JOURNAL OF POWER SOURCES (2007)
Thermal stress analysis of a planar SOFC stack
Chih-Kuang Lin et al.
JOURNAL OF POWER SOURCES (2007)
Mechanical properties of pure Ni and Ni-alloy substrate materials for Y-Ba-Cu-O coated superconductors
C. C. Clickner et al.
CRYOGENICS (2006)
Crack growth in solid oxide fuel cell materials: From discrete to continuum damage modeling
BN Nguyen et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Reduction and re-oxidation of anodes for solid oxide fuel cells
J Malzbender et al.
SOLID STATE IONICS (2005)
Dynamic instabilities of fracture under biaxial strain using a phase field model
H Henry et al.
PHYSICAL REVIEW LETTERS (2004)
Three-dimensional phase field microelasticity theory of a multivoid multicrack system in an elastically anisotropic body: model and computer simulations
YMM Jin et al.
PHILOSOPHICAL MAGAZINE (2003)
Kinetics of oxidation and reduction of Ni/YSZ cermets
D Fouquet et al.
IONICS (2003)
Phase field microelasticity theory and modeling of elastically and structurally inhomogeneous solid
YU Wang et al.
JOURNAL OF APPLIED PHYSICS (2002)
Fracture energy and crack growth in surface treated Yttria stabilized Zirconia for SOFC applications
AN Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Microstructure and mechanical properties of silicon nitride ceramics with controlled porosity
JF Yang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)
Thermally induced failure of multilayer ceramic structures
EP Busso et al.
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES (2001)
Phase-field model of mode III dynamic fracture
A Karma et al.
PHYSICAL REVIEW LETTERS (2001)
Room and high temperature failure mechanisms in solid oxide fuel cell electrolytes
FL Lowrie et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)
Solid oxide fuel cells: fundamental aspects and prospects
O Yamamoto
ELECTROCHIMICA ACTA (2000)
分享论文
