相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Personal thermal management A review on strategies, progress, and prospects
Uzair Sajjad et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)
High performance, microarchitected, compact heat exchanger enabled by 3D printing
Tisha Dixit et al.
APPLIED THERMAL ENGINEERING (2022)
Heat transfer in BCC lattice materials: Conduction, convection, and radiation
M. Shahrzadi et al.
COMPOSITE STRUCTURES (2022)
On the assessment of the mechanical properties of additively manufactured lattice structures
Mubasher Ali et al.
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2022)
Experimental Study on the Thermal Performance of a Finned Metal Foam Heat Sink with Phase Change Material
Yongping Huang et al.
HEAT TRANSFER ENGINEERING (2021)
Thermal performance of a 3D printed lattice-structure heat sink packaging phase change material
Yuandong Guo et al.
CHINESE JOURNAL OF AERONAUTICS (2021)
Experimental demonstration of lightweight lattice metamaterials with controllable low thermal expansion
Yangbo Li et al.
THIN-WALLED STRUCTURES (2021)
Thermal insulation performance and heat transfer mechanism of C/SiC corrugated lattice core sandwich panel
Yanfei Chen et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2021)
Mitigation effects of Body-Centered Cubic Lattices on the heat transfer deterioration of supercritical CO2
Zenan Yang et al.
APPLIED THERMAL ENGINEERING (2021)
Instationary heat and mass transfer phenomena in additive manufactured open cell polyhedral structures for automotive catalysis
V Papetti et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Lightweight and low thermal conducted face-centered-cubic cementitious lattice materials (FCLMs)
Jian Song et al.
COMPOSITE STRUCTURES (2021)
Numerical evaluation of additively manufactured lattice architectures for heat sink applications
Tisha Dixit et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)
Additively manufactured bi-material metamaterial to program a wide range of thermal expansion
Kai Wei et al.
MATERIALS & DESIGN (2021)
Prediction of effective thermal conductivity of porous lattice structures and validation with additively manufactured metal foams
Nanqiao Wang et al.
APPLIED THERMAL ENGINEERING (2021)
Structure-heat transport analysis of periodic open-cell foams to be used as catalyst carriers
Christoph Sinn et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2021)
Numerical investigation on conjugate heat transfer in octet-shape-based single unit cell thick metal foam
Inderjot Kaur et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)
Numerical investigation on effective thermal conductivity of fibrous porous medium under vacuum using Lattice-Boltzmann method
Jiaxi Lu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)
Pore-scale heat transfer of heat sink filled with stacked 2D metal fiber-PCM composite
Qinlong Ren et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)
Enhancing corrosion resistance of Al 5050 alloy based on surface roughness and its fabrication methods; an experimental investigation
Uzair Sajjad et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Tunable auxeticity and isotropic negative thermal expansion in three-dimensional lattice structures of cubic symmetry
Xiang-Long Peng et al.
EXTREME MECHANICS LETTERS (2021)
On thermally managing lithium-ion battery cells by air-convection aspirated in tetrahedral lattice porous cold plates
Young Woo Son et al.
APPLIED THERMAL ENGINEERING (2021)
Determining the Factors Affecting the Boiling Heat Transfer Coefficient of Sintered Coated Porous Surfaces
Uzair Sajjad et al.
SUSTAINABILITY (2021)
Boiling Heat Transfer Evaluation in Nanoporous Surface Coatings
Uzair Sajjad et al.
NANOMATERIALS (2021)
Critical evaluation of additively manufactured metal lattices for viability in advanced heat exchangers
Inderjot Kaur et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Heat dissipation in 3D printed cellular aluminum nitride structures
Manuel Belmonte et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Stereolithography additive manufacturing of multi-ceramic triangle structures with tunable thermal expansion
Keqiang Zhang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Mechanical behavior and energy dissipation of infilled, composite Ti-6Al-4V trusses
Wesley A. Chapkin et al.
MATERIALS & DESIGN (2021)
Large programmable coefficient of thermal expansion in additively manufactured bi-material mechanical metamaterial
Kai Wei et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
Experimental study on the thermal response of PCM-based heat sink using structured porous material fabricated by 3D printing
Xusheng Hu et al.
CASE STUDIES IN THERMAL ENGINEERING (2021)
Enhanced pool boiling of dielectric and highly wetting liquids-A review on surface engineering
Uzair Sajjad et al.
APPLIED THERMAL ENGINEERING (2021)
Comparison between finite element and experimental evidences of innovative W lattice materials for sacrificial limiter applications
R. De Luca et al.
FUSION ENGINEERING AND DESIGN (2021)
A high-fidelity approach to correlate the nucleate pool boiling data of roughened surfaces
Uzair Sajjad et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2021)
ENHANCING BOILING HEAT TRANSFER FOR ELECTRONICS COOLING BY EMBEDDING AN ARRAY OF MICROGROOVES INTO SANDBLASTED SURFACES
Uzair Sajjad et al.
HEAT TRANSFER RESEARCH (2021)
Mechanical analysis and modeling of metallic lattice sandwich additively fabricated by selective laser melting
Kai Wei et al.
THIN-WALLED STRUCTURES (2020)
Thermal performance analysis of metallic foam-based heat sinks embedded with RT-54HC paraffin: an experimental investigation for electronic cooling
Tauseef-ur-Rehman et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
An X-lattice cored rectangular honeycomb with enhanced convective heat transfer performance
Hongbin Yan et al.
APPLIED THERMAL ENGINEERING (2020)
Additive manufacturing of interpenetrating periodic open cellular structures (interPOCS) with in operando adjustable flow characteristics
Giang Do et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
1D to 3D multi-stable architected materials with zero Poisson's ratio and controllable thermal expansion
Hang Yang et al.
MATERIALS & DESIGN (2020)
Pore-scale simulation of forced convection heat transfer under turbulent conditions in open-cell metal foam
Mingrui Sun et al.
CHEMICAL ENGINEERING JOURNAL (2020)
A novel 3D structure with tunable Poisson's ratio and tailorable coefficient of thermal expansion based on a tri-material triangle unit
Ming-Ming Chen et al.
COMPOSITE STRUCTURES (2020)
Effective thermal conductivity and heat transfer characteristics for a series of lightweight lattice core sandwich panels
Xiuwu Wang et al.
APPLIED THERMAL ENGINEERING (2020)
Experimental based numerical approach for determination of volumetric heat transfer coefficients of modified graphite foams
Gursah Guruf et al.
APPLIED THERMAL ENGINEERING (2020)
Experimental and numerical investigation on thermal performance enhancement of phase change material embedding porous metal structure with cubic cell
Xusheng Hu et al.
APPLIED THERMAL ENGINEERING (2020)
Heat transfer and entropy generation analysis in a three-dimensional impinging jet porous heat sink under local thermal non-equilibrium condition
Mohammad Reza Salimi et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)
Design and Optimization of Lattice Structures: A Review
Chen Pan et al.
APPLIED SCIENCES-BASEL (2020)
3D kirigami metamaterials with coded thermal expansion properties
Nan Yang et al.
EXTREME MECHANICS LETTERS (2020)
Enhanced pool boiling of dielectric and highly wetting liquids - a review on enhancement mechanisms
Uzair Sajjad et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)
A novel 3-D structure with tunable Poisson's ratio and adjustable thermal expansion
Na Xu et al.
COMPOSITES COMMUNICATIONS (2020)
Numerical simulation on the forced convection heat transfer of porous medium for turbine engine heat exchanger applications
Chengzhi Hu et al.
APPLIED THERMAL ENGINEERING (2020)
Meta-biomaterials
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2020)
Thermal conductivity and Young's modulus of cubic-cell metamaterials
Tereza Uhlirova et al.
CERAMICS INTERNATIONAL (2019)
Thermal protection system integrating graded insulation materials and multilayer ceramic matrix composite cellular sandwich panels
Xiuwu Wang et al.
COMPOSITE STRUCTURES (2019)
Thermal conductivity model of open-cell foam suitable for wide span of porosities
Dongxu Wu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Experimental and numerical investigation of forced convection heat transfer in porous lattice structures produced by selective laser melting
J. Y. Ho et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Fluid flow and heat transfer characteristics of octet truss lattice geometry
Pawankumar Ekade et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer
M. Pelanconi et al.
MATERIALS & DESIGN (2019)
Experimental investigation of heat transfer and flow characteristics in finned copper foam heat sinks subjected to jet impingement cooling
Jian Wang et al.
APPLIED ENERGY (2019)
Heat transfer mechanism and characteristics of lightweight high temperature ceramic cellular sandwich
Kai Wei et al.
APPLIED THERMAL ENGINEERING (2019)
Thermal effect on the microstructure of the lattice structure Cu-10Sn alloy fabricated through selective laser melting
Zhen Tan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Potentials of porous materials for energy management in heat exchangers - A comprehensive review
Saman Rashidi et al.
APPLIED ENERGY (2019)
A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams
Tauseef-ur-Rehman et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Thermal conductivity of architected cellular metamaterials
A. Mirabolghasemi et al.
ACTA MATERIALIA (2019)
Experimental investigation of heat transfer and fluid flow in octet-truss lattice geometry
Aniket Chaudhari et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Evaluation of the mechanical compatibility of additively manufactured porous Ti-25Ta alloy for load-bearing implant applications
Nicolas Soro et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Thermo-mechanical bending of architected functionally graded cellular beams
H. Niknam et al.
COMPOSITES PART B-ENGINEERING (2019)
Parametric design of graded truss lattice structures for enhanced thermal dissipation
Benjamin Vaissier et al.
COMPUTER-AIDED DESIGN (2019)
Heat transfer enhancement of wedge-shaped channels by replacing pin fins with Kagome lattice structures
Beibei Shen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Convective heat transfer enhancement by novel honeycomb-core in sandwich panel exchanger fabricated by additive manufacturing
Dekui Kong et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental and numerical investigation of liquid-cooled heat sinks designed by topology optimization
Hao Li et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Experimental and numerical study on the thermal behavior of phase change material infiltrated in low porosity metal foam
Xusheng Hu et al.
JOURNAL OF ENERGY STORAGE (2019)
Additively manufactured porous metallic biomaterials
Amir A. Zadpoor
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Investigating the performance of GFRP/wood-based honeycomb sandwich panels for sustainable prefab building construction
Muzamil Hussain et al.
SN APPLIED SCIENCES (2019)
Optimization of heat transfer enhancement and pumping power of a heat exchanger tube using nanofluid with gradient and multi-layered porous foams
Majid Siavashi et al.
APPLIED THERMAL ENGINEERING (2018)
The effects of geometrical topology on fluid flow and thermal performance in Kagome cored sandwich panels
Beibei Shen et al.
APPLIED THERMAL ENGINEERING (2018)
Structural and thermal analysis of integrated thermal protection systems with C/SiC composite cellular core sandwich panels
Kai Wei et al.
APPLIED THERMAL ENGINEERING (2018)
A fundamental analysis of the influence of the geometrical properties on the effective thermal conductivity of open-cell foams
Mauro Bracconi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
Infill Optimization for Additive Manufacturing-Approaching Bone-Like Porous Structures
Jun Wu et al.
IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS (2018)
Homogenized and pore-scale analyses of forced convection through open cell foams
Dig Vijay et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Additively-manufactured functionally graded Ti-6Al-4V lattice structures with high strength under static and dynamic loading: Experiments
Xiao Lijun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Three-dimensional metamaterials with a negative Poisson's ratio and a non-positive coefficient of thermal expansion
L. Ai et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing
Bruno Jette et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Additive manufacturing of 3D nano-architected metals
Andrey Vyatskikh et al.
NATURE COMMUNICATIONS (2018)
Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting
Fei Liu et al.
MATERIALS (2018)
Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM
Dheyaa S. J. Al-Saedi et al.
MATERIALS & DESIGN (2018)
The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction
Boqing Zhang et al.
MATERIALS & DESIGN (2018)
Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling
Tauseef-ur-Rehman et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)
Comparative evaluations of thermofluidic characteristics of sandwich panels with X-lattice and Pyramidal-lattice cores
Xin Jin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems
Tauseef-ur-Rehman et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Mechanical responses of titanium 3D kagome lattice structure manufactured by selective laser melting
Kai Wei et al.
EXTREME MECHANICS LETTERS (2018)
Light-weighting in aerospace component and system design
L. Zhu et al.
PROPULSION AND POWER RESEARCH (2018)
Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing
A. du Plessis et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Design, analysis and manufacturing of lattice structures: an overview
Mark Helou et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2018)
Mechanical characterization and finite element modeling of polylactic acid BCC-Z cellular lattice structures fabricated by fused deposition modeling
R. Rezaei et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2017)
Thermo-Fluidic Comparison between Sandwich Panels with Tetrahedral Lattice Cores Fabricated by Casting and Metal Sheet Folding
Xiaoqing Zhang et al.
ENERGIES (2017)
Design of multifunctional lattice-frame materials for compact heat exchangers
Karen N. Son et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Guoying Dong et al.
JOURNAL OF MECHANICAL DESIGN (2017)
Uncertainty quantification and validation of 3D lattice scaffolds for computer-aided biomedical applications
Recep M. Gorguluarslan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Convective heat transfer in a lightweight multifunctional sandwich panel with X-type metallic lattice core
Hongbin Yan et al.
APPLIED THERMAL ENGINEERING (2017)
High temperature mechanical properties of lightweight C/SiC composite pyramidal lattice core sandwich panel
Kai Wei et al.
COMPOSITE STRUCTURES (2017)
High temperature mechanical behaviors of lightweight ceramic corrugated core sandwich panel
Kai Wei et al.
COMPOSITE STRUCTURES (2017)
Metamaterials with negative Poisson's ratio and non-positive thermal expansion
L. Ai et al.
COMPOSITE STRUCTURES (2017)
Assessment of Periodic Open Cellular Structures for Enhanced Heat Conduction in Catalytic Fixed-Bed Reactors
Enrico Bianchi et al.
ADVANCED ENGINEERING MATERIALS (2016)
Topology Optimization in Aircraft and Aerospace Structures Design
Ji-Hong Zhu et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2016)
High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
Sajad Arabnejad et al.
ACTA BIOMATERIALIA (2016)
Hierarchical honeycomb lattice metamaterials with improved thermal resistance and mechanical properties
Yanyu Chen et al.
COMPOSITE STRUCTURES (2016)
Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles
Luca Ferrari et al.
COMPOSITE STRUCTURES (2016)
Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection
Joe Alexandersen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Energy absorption in lattice structures in dynamics: Experiments
Zuhal Ozdemir et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Heat transfer enhancement by X-type lattice in ventilated brake disc
H. B. Yan et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Design and Analysis of Lattice Structures for Additive Manufacturing
Christiane Beyer et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Planar lattices with tailorable coefficient of thermal expansion and high stiffness based on dual-material triangle unit
Kai Wei et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Periodic truss structures
Frank W. Zok et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
A survey of the design methods for additive manufacturing to improve functional performance
Yunlong Tang et al.
RAPID PROTOTYPING JOURNAL (2016)
Industrial application of topology optimization for combined conductive and convective heat transfer problems
Mingdong Zhou et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2016)
Strength analysis and modeling of cellular lattice structures manufactured using selective laser melting for tooling applications
Rasoul Mahshid et al.
MATERIALS & DESIGN (2016)
Design and analysis of integrated thermal protection system based on lightweight C/SiC pyramidal lattice core sandwich panel
Kai Wei et al.
MATERIALS & DESIGN (2016)
Fabrication and heat transfer characteristics of C/SiC pyramidal core lattice sandwich panel
Kai Wei et al.
APPLIED THERMAL ENGINEERING (2015)
Numerical simulation of heat transfer in the near-wall region of tubular reactors packed with metal open-cell foams
Enrico Bianchi et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Heat pipe heat exchangers and heat sinks: Opportunities, challenges, applications, analysis, and state of the art
Hamidreza Shabgard et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Scalability Planning for Cloud-Based Manufacturing Systems
Dazhong Wu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Design and Implementation of a Broker for Cloud Additive Manufacturing Services
Venkata P. Modekurthy et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
A lightweight, high compression strength ultra high temperature ceramic corrugated panel with potential for thermal protection system applications
Kai Wei et al.
MATERIALS & DESIGN (2015)
Influence of Orientation and Radiative Heat Transfer on Aluminum Foams in Buoyancy-Induced Convection
Marijn Billiet et al.
MATERIALS (2015)
Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing
Xuan Song et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Yong Huang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Heat transfer mechanism of the C/SiC ceramics pyramidal lattice composites
Kai Wei et al.
COMPOSITES PART B-ENGINEERING (2014)
Fabrication and mechanical properties of lightweight ZrO2 ceramic corrugated core sandwich panels
Kai We et al.
MATERIALS & DESIGN (2014)
Application of 3D Printing Technology for Designing Light-weight Unmanned Aerial Vehicle Wing Structures
Seung Ki Moon et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2014)
An appraisal of the heat transfer properties of metallic open-cell foams for strongly exo-/endo-thermic catalytic processes in tubular reactors
Enrico Bianchi et al.
CHEMICAL ENGINEERING JOURNAL (2012)
Anisogrid composite lattice structures - Development and aerospace applications
V. V. Vasiliev et al.
COMPOSITE STRUCTURES (2012)
A theoretical octet-truss lattice unit cell model for effective thermal conductivity of consolidated porous materials saturated with fluid
Z. G. Qu et al.
HEAT AND MASS TRANSFER (2012)
Multifunctional heat exchangers derived from three-dimensional micro-lattice structures
Kevin J. Maloney et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Non-stochastic Ti-6Al-4V foam structures with negative Poisson's ratio
Li Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Fluid Dynamics of Flow Through Microscale Lattice Structures Formed from Self-Propagating Photopolymer Waveguides
Kathryn D. Fink et al.
AICHE JOURNAL (2011)
A Level Set-Based Topology Optimization Method for Maximizing Thermal Diffusivity in Problems Including Design-Dependent Effects
Takayuki Yamada et al.
JOURNAL OF MECHANICAL DESIGN (2011)
Optimal design of composite lattice shell structures for aerospace applications
G. Totaro et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2009)
Topology optimization for thermal conductors considering design-dependent effects, including heat conduction and convection
A. Iga et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
Peter Heinl et al.
ACTA BIOMATERIALIA (2008)
Topology optimization of heat conduction problem involving design-dependent heat load effect
T. Gao et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2008)
Modeling and prediction of the effective thermal conductivity of random open-cell porous foams
Moran Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)
Simulation of thermal transport in open-cell metal foams: Effect of periodic unit-cell structure
Shankar Krishnan et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2008)
Cross flow heat exchange of textile cellular metal core sandwich panels
J. Tian et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Anisogrid composite lattice structures for spacecraft and aircraft applications
V. V. Vasiliev et al.
COMPOSITE STRUCTURES (2006)
Optimal active cooling performance of metallic sandwich panels with prismatic cores
L. Valdevit et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Forced convection in metallic honeycomb structures
T. Wen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame material
T Kim et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Convective heat dissipation with lattice-frame materials
T Kim et al.
MECHANICS OF MATERIALS (2004)
The effects of topology upon fluid-flow and heat-transfer within cellular copper structures
J Tian et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger
T Kim et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2004)
Thermophysical properties of high porosity metal foams
A Bhattacharya et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity
S Gu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)
Foam topology bending versus stretching dominated architectures
VS Deshpande et al.
ACTA MATERIALIA (2001)
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
K Boomsma et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)