☆ 4.7 Article

Analysis of temperature gradients in thin-walled structures under thermomechanical fatigue loading conditions

INTERNATIONAL JOURNAL OF FATIGUE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Nonlinear variable band gap of reduced graphene oxide examined by in-situ absorption spectrum and light response

Lirong Gong et al.

Summary: This study investigates the relationship between oxygen group and band gap in reduced graphene oxide (RGO). The results show that the reduction of oxygen group strongly depends on the annealing temperature, leading to a nonlinear variable band gap. The nonlinear photoelectric response of RGO light detective device further confirms this trend. Our work provides a pathway for the application of RGO in electronic fields.

DIAMOND AND RELATED MATERIALS (2022)

添加到收藏夹

Review Thermodynamics

Flow and heat transfer in swirl tubes-A review

Florian Seibold et al.

Summary: This article provides a review of cyclone cooling technology in gas turbines, including flow field and heat transfer evaluation. Through comparative analysis of various design features, the advantages of cyclone cooling systems over traditional techniques are revealed. Additionally, the predictability of different turbulence modeling approaches is assessed, and open questions for future research in cyclone cooling are discussed.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Engineering, Aerospace

Estimate of Temperature Gradients of Thin-Walled Structures Under Thermomechanical Fatigue Loading

Jiawei Xu et al.

Summary: This study investigates the temperature gradients in thin-walled structures and finds that the peak and steady-state temperature gradients are linearly related to heating power and cooling conditions, and are not affected by plate thickness.

AIAA JOURNAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of Thermal Gradient Mechanical Fatigue Test Methods for Nickel-based Superalloys

J. Sun et al.

Summary: The study developed a radiation heating system to simulate thermal gradient mechanical fatigue, successfully performed TGMF tests, and found that temperature gradients significantly reduced TGMF life.

EXPERIMENTAL MECHANICS (2021)

添加到收藏夹

Article Thermodynamics

A modified sequential gradient-based method for the inverse estimation of transient heat transfer coefficients in non-linear one-dimensional heat conduction problems

Benjamin A. Tourn et al.

Summary: This study introduces an online sequential implementation of a gradient-based method for reconstructing transient heat transfer coefficients in the context of non-linear one-dimensional heat conduction problems, denoted as the sequential quasi-Newton method (SQNM). The proposed method is fast, robust, and reliable, demonstrating its suitability for reconstructing transient heat transfer coefficients in one- and two-dimensional non-linear heat conduction problems as a novel alternative strategy to other online inverse estimation procedures.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Mechanical

A method for predicting the delamination life of thermal barrier coatings under thermal gradient mechanical fatigue condition considering degradation characteristics

Damhyun Kim et al.

Summary: A method for predicting delamination life under TGMF conditions, considering thermally grown oxides and sintering behavior, was established through degradation tests and defining damage factors. Validation through TGMF tests on different substrates confirmed the validity of the prediction method with similar actual and predicted lives.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Assessment of thermo-mechanical fatigue in a nickel-based single-crystal superalloy CMSX-4 accounting for temperature gradient effects

Jingyu Sun et al.

Summary: The study shows that the lifetime of nickel-based single-crystal superalloy CMSX-4 under thermo-mechanical fatigue and thermal gradient mechanical fatigue loading conditions is significantly affected by temperature gradient. Conventional fatigue models fail to accurately describe this, emphasizing the need to consider temperature gradient and thermal-mechanical phase angle effects.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Thermodynamics

High pressure turbine blade internal cooling in a realistic rib roughened two-pass channel

Xu Wang et al.

Summary: This study investigated the internal cooling characteristics of turbine blades in a realistic rib roughened two-pass channel and found that the type of wall boundary conditions had a significant impact on blade internal cooling performance, with blade rotation leading to a significant increase in heat transfer on the trailing surface.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Unsteady convective heat transfer from a flat plate with heat flux that varies in space and time

Amirhossein Mostafavi et al.

Summary: This study addresses convective heat transfer on a flat plate where heat flux varies both spatially and temporally, deriving an analytical solution for plate temperature distribution. The approach involves the use of fourth-order Karman-Pohlhausen polynomials and integral form of the energy equation to obtain a non-linear, first order, hyperbolic partial differential equation. Numerical solutions are provided for various heat flux profiles of interest in practical applications, contributing to the understanding and optimization of engineering systems.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Mechanical

Thermal gradient mechanical fatigue assessment of a nickel-based superalloy

Jingyu Sun et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Nuclear Science & Technology

A sequential conjugate gradient method to estimate heat flux for nonlinear inverse heat conduction problem

Ping Xiong et al.

ANNALS OF NUCLEAR ENERGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Novel Test Facility for Investigation of the Impact of Thermally Induced Stress Gradients on Fatigue Life of Cooled Gas Turbine Components

Marcus Thiele et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2019)

添加到收藏夹

Article Thermodynamics

Validation of the discrete element roughness method for predicting heat transfer on rough surfaces

David R. Hanson et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Single-phase mixed convective heat transfer and pressure drop in the laminar and transitional flow regimes in smooth inclined tubes heated at a constant heat flux

J. P. Meyer et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2019)

添加到收藏夹

Article Engineering, Mechanical

Damage mechanisms in an EB-PVD thermal barrier coating system during TMF and TGMF testing conditions under combustion environment

Florent Mauget et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

FEM-DBEM approach for crack propagation in a low pressure aeroengine turbine vane segment

Roberto Citarella et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of Thermal Gradient Mechanical Fatigue Characteristics of Thermal Barrier Coating, Considering the Effects of Thermally Grown Oxide

Jeong-Min Lee et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Thermo-mechanical crack propagation in aircraft engine vane by coupled FEM-DBEM approach

R. Citarella et al.

ADVANCES IN ENGINEERING SOFTWARE (2014)

添加到收藏夹

Article Thermodynamics

Radiation emission from a heating coil or a halogen lamp on a semitransparent sample

P. Boulet et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)

添加到收藏夹

Article Engineering, Mechanical

Effects of strain rate and mean strain on cyclic behavior of aluminum alloys under isothermal and thermo-mechanical fatigue loadings

Mohammad Azadi

INTERNATIONAL JOURNAL OF FATIGUE (2013)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Assessment of the Characteristic of Thermal Barrier Coating Applied to Gas Turbine Blade by Thermo-Gradient Mechanical Fatigue Test

In Hwan Shin et al.

6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

A sequential algorithm and error sensitivity analysis for the inverse heat conduction problems with multiple heat sources

Shih-Ming Lin

APPLIED MATHEMATICAL MODELLING (2011)

添加到收藏夹

Article Thermodynamics

Inverse estimation of the inner wall temperature fluctuations in a pipe elbow

T. Lu et al.

APPLIED THERMAL ENGINEERING (2011)

添加到收藏夹

Article Thermodynamics

A two-dimensional inverse heat conduction problem in estimating the fluid temperature in a pipeline

T. Lu et al.

APPLIED THERMAL ENGINEERING (2010)

添加到收藏夹

Article Thermodynamics

Inverse estimation of spatially and temporally varying heating boundary conditions of a two-dimensional object

Jianhua Zhou et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

添加到收藏夹

Review Engineering, Mechanical

A Review of Surface Roughness Effects in Gas Turbines

J. P. Bons

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep behavior of single crystal superalloy specimen under temperature gradient condition

N. X. Hou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

添加到收藏夹

Article Engineering, Mechanical

Temperature gradients in TMF specimens. Measurement and influence on TMF life

T. Brendel et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

添加到收藏夹

Article Engineering, Mechanical

Advanced thermal gradient mechanical fatigue testing of CMSX-4 with an oxidation protection coating

Bernd Baufeld et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

添加到收藏夹

Article Engineering, Mechanical

Fatigue cracks in a thermal barrier coating system on a superalloy in multiaxial thermomechanical testing

Marion Bartsch et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

添加到收藏夹

Article Thermodynamics

Numerical solutions of conjugate heat transfer and thermal stresses in a circular pipe externally heated with non-uniform heat flux

H Yapici et al.

ENERGY CONVERSION AND MANAGEMENT (2004)

添加到收藏夹

Article Thermodynamics

Determination of heat transfer rate and Nusselt number on the thermal-entry region in ducts

M Kilic

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2004)

添加到收藏夹

Article Thermodynamics

Transient laminar forced convection with arbitrary variation in the wall heat flux

G Polidori et al.

HEAT AND MASS TRANSFER (2002)

添加到收藏夹

Article Engineering, Industrial

Thermal stresses in thick-walled pipes subjected to fully developed laminar flow

IT Alzaharnah et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.