☆ 4.7 Article

Fatigue life prediction of bending polymer films using random forest

INTERNATIONAL JOURNAL OF FATIGUE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

A novel method of multiaxial fatigue life prediction based on deep learning

Jingye Yang et al.

Summary: A novel deep learning-based method is proposed in this study to predict fatigue data of different materials, with excellent prediction accuracy for various loading conditions. The method shows strong capability in handling different loading paths and levels, but its extrapolation capability may weaken with increasing distinctions between training and test datasets in terms of loading paths.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanoscale Analysis of Surface Bending Strain in Film Substrates for Preventing Fracture in Flexible Electronic Devices

Ryo Taguchi et al.

Summary: The study introduces a surface-labeled grating method for measuring surface bending strains in materials accurately and without the need for additional material information. By reducing surface bending strains, the fracture limit of hard coatings on flexible substrates was successfully determined.

ADVANCED MATERIALS INTERFACES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A Deformable Low-Threshold Optical Limiter with Oligothiophene-Doped Liquid Crystals

Koji Usui et al.

Summary: This study introduces oligothiophene-doped liquid crystals as a low-threshold and deformable optical limiter, which can be tuned by adjusting the applied voltage without additional optical components. This novel optical limiter based on oligothiophene-doped LCs provides protection for eyes and optical sensors from intense light damage.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Physics, Applied

Wideband reflection wavelength tuning by bending of cholesteric liquid crystal elastomer films

Masayuki Kishino et al.

Summary: This study investigates the tuning of reflection wavelength of cholesteric liquid crystal elastomers (CLCEs) using bending, which requires lower load and achieves a wider tuning range compared to traditional stretching. Experimental evidence demonstrates the effectiveness of this wideband reflection wavelength tuning by low-load bending.

JOURNAL OF APPLIED PHYSICS (2021)

添加到收藏夹

Article Polymer Science

Rotating Bending Fatigue Analysis of Printed Specimens from Assorted Polymer Materials

Marino Brcic et al.

Summary: Fused filament fabrication (FFF), a form of additive manufacturing (AM), has gained popularity in manufacturing prototypes and functional parts. Common materials used include polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), and acrylonitrile styrene acrylate (ASA).

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechano-Optical Sensors Fabricated with Multilayered Liquid Crystal Elastomers Exhibiting Tunable Deformation Recovery

Kyohei Hisano et al.

Summary: This study introduces a design concept for tuning the recovery response of liquid crystal elastomers by utilizing layered materials. By changing the layering materials, it was possible to significantly reduce the relaxation time from months to seconds, enabling the development of highly sensitive and stretchable mechano-optical sensors with real-time strain detection and high spatial resolution storage capabilities.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Mechanics

Data-driven fatigue life prediction in additive manufactured titanium alloy: A damage mechanics based machine learning framework

Zhixin Zhan et al.

Summary: This paper proposes a machine learning framework based on damage mechanics for data-driven fatigue life prediction of AM titanium alloy. Fatigue life predictions are conducted for AM titanium alloy specimens under different stress levels and stress ratios, compared with experimental data, and parametric studies on prediction performance and fatigue lives are carried out.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Chemistry, Physical

Quantitative analysis of bending hysteresis by real-time monitoring of curvature in flexible polymeric films†

Ryo Taguchi et al.

Summary: This study successfully determined the curvatures that cause the bending hysteresis by precisely monitoring bending curvatures, and found that these curvatures depend on film thickness. Furthermore, the occurrence of bending hysteresis can be explained by bending strains with a nonlinear relation with internal stresses.

SOFT MATTER (2021)

添加到收藏夹

Article Polymer Science

Rubber fatigue life prediction using a random forest method and nonlinear cumulative fatigue damage model

Qiaobin Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

添加到收藏夹

Article Physics, Applied

Experimental and theoretical analyses of curvature and surface strain in bent polymer films

Kohei Kuwahara et al.

Applied Physics Express (2020)

添加到收藏夹

Article Engineering, Mechanical

Life prediction for rate-dependent low-cycle fatigue of PA6 polymer considering ratchetting: Semi-empirical model and neural network based approach

Jingye Yang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Fatigue Life Prediction of GLARE Composites Using Regression Tree Ensemble-Based Machine Learning Model

Wei Sai et al.

ADVANCED THEORY AND SIMULATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Composition optimization of a high-performance epoxy resin based on molecular dynamics and machine learning

Kai Jin et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Chemistry, Physical

Machine learning assisted materials design and discovery for rechargeable batteries

Yue Liu et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Machine Learning Predictions of Block Copolymer Self-Assembly

Kun-Hua Tu et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

High cycle fatigue life prediction of laser additive manufactured stainless steel: A machine learning approach

Meng Zhang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Flexible and Stretchable Smart Display: Materials, Fabrication, Device Design, and System Integration

Ja Hoon Koo et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Paper-Based Electrodes for Flexible Energy Storage Devices

Bin Yao et al.

ADVANCED SCIENCE (2017)

添加到收藏夹

Review Construction & Building Technology

Machine learning for durability and service-life assessment of reinforced concrete structures: Recent advances and future directions

Woubishet Zewdu Taffese et al.

AUTOMATION IN CONSTRUCTION (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Suppressing molecular vibrations in organic semiconductors by inducing strain

Takayoshi Kubo et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Progress in flexible lithium batteries and future prospects

Guangmin Zhou et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Polymer Science

Development of Elastic and Plastic Properties of Polyoxymethylene During Bending Fatigue

Gregory S. Heinlein et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

添加到收藏夹

Review Optics

Polymer solar cells

Gang Li et al.

NATURE PHOTONICS (2012)

添加到收藏夹

Review Multidisciplinary Sciences

Materials and Mechanics for Stretchable Electronics

John A. Rogers et al.

SCIENCE (2010)

添加到收藏夹

Article Polymer Science

Fatigue life predictions for glassy polymers: A constitutive approach

Roel P. M. Janssen et al.

MACROMOLECULES (2008)

添加到收藏夹

Review Multidisciplinary Sciences

The path to ubiquitous and low-cost organic electronic appliances on plastic

SR Forrest

NATURE (2004)

添加到收藏夹

Article Multidisciplinary Sciences

Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors

K Nomura et al.

NATURE (2004)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Random forests

L Breiman

MACHINE LEARNING (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.