4.7 Article

Infiltrated Nanofiber-Based Nanostructured Electrodes for Solid Oxide Fuel Cells

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Thermodynamics

A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels

Qidong Xu et al.

Summary: This article comprehensively reviews the electrochemical performances and stabilities of SOFCs operating on various fuels. Although comparable power densities to hydrogen were frequently obtained, degradation problems induced by these fuels influence the long-term stable operation of SOFCs. Potential strategies from three perspectives of thermodynamics, kinetics and structure are proposed to solve degradation issues. The remaining challenges and future prospects of SOFCs fed by each fuel are separately elaborated.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Chemistry, Physical

Advanced metal oxide infiltrated electrodes for boosting the performance of solid oxide cells

Alodia Orera et al.

Summary: The study focuses on enhancing the performance of oxygen electrodes by infiltrating metal oxide nanoparticles. Different metal oxides such as cerium oxide, praseodymium or manganese oxide will be examined for their effect on the performance of lanthanum strontium manganite oxygen electrodes. The infiltration of metal oxides significantly improves the current densities in both fuel cell and electrolysis modes in comparison with literature results for microtubular configuration.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Engineering, Environmental

Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Muhammad Bilal Hanif et al.

Summary: Solid oxide fuel cells (SOFCs) hold promise for energy conversion technology, but face challenges such as component degradation and sulfur poisoning. This article discusses various electrode materials and improvements to enhance electrochemical performance, highlighting critical challenges for advancement.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Chemistry, Multidisciplinary

Advanced Materials for Thin-Film Solid Oxide Fuel Cells: Recent Progress and Challenges in Boosting the Device Performance at Low Temperatures

Jun Zhang et al.

Summary: Solid oxide fuel cells (SOFCs) are efficient electrochemical energy conversion devices that have the potential to become low cost. However, their high operating temperatures have hindered their widespread commercialization. This review summarizes the recent progress in developing materials to lower the operating temperature of SOFCs and discusses the new opportunities and challenges. The focus is on thin film SOFCs, sub-micrometer SOFCs based on microelectromechanical systems, and devices based on proton-conducting oxide electrolyte.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Engineering, Environmental

Tuning the oxygen vacancy concentration in a heterostructured electrode for high chemical and electrochemical stabilities

Mingi Choi et al.

Summary: This study demonstrates the precise tuning of oxygen vacancy concentration at the perovskite surface in a heterostructured electrode, resulting in a significant increase in surface exchange coefficient for highly sustainable electrodes under long-term operation at elevated temperatures.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Performance and DRT analysis of infiltrated functional cathode based on the anode supported SOFCs with long-term stability

Ziwei Zheng et al.

Summary: The relationship between morphology and kinetics of oxygen reduction reaction (ORR) in cathode functional layer (CFL) is studied. A highly efficient and robust CFL is prepared by infiltrating method, which shows significantly enhanced ORR activity. This study provides insights for improving the performance of solid oxide fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Preparation of 3D structure high performance Ba0.5Sr0.5Fe0.8Cu0.2O3-δ nanofiber SOFC cathode material by low-temperature calcination method

Jinghe Bai et al.

Summary: BSFC cathode material was prepared using electrospinning and sol-gel methods, and the effect of sintering temperature on its properties was investigated. The results showed that low-temperature calcination improved the structure and performance of the fibers, with BSFC-F800 exhibiting lower resistance and higher power density at 700 degrees Celsius.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Controlling oxygen defect chemistry at electrolyte surface of intermediate temperature solid oxide fuel cells

Seo Ju Kim et al.

Summary: Engineering the anion defect, especially oxygen vacancy, at the electrolyte surface is crucial for improving the oxygen reduction reaction kinetics and enhancing the electrochemical performance of intermediate temperature solid oxide fuel cells. The precise control of defect chemistry through infiltration methods can significantly increase the maximum power density of the fuel cells, providing extended and more active reaction sites.

JOURNAL OF POWER SOURCES (2021)

Article Materials Science, Ceramics

Effects of water atmosphere on chemical degradation of PrBa0.5Sr0.5Co1.5Fe0.5O5+δ electrodes

Mingi Choi et al.

Summary: Protonic ceramic fuel cells (PCFC) show exceptional power output due to their advanced electrolyte and cathode materials, but face challenges in reliable long-term operation. Water adsorption onto the electrode surface alters the chemical states, leading to increased electrostatic attraction and cation segregation, ultimately resulting in electrode degradation.

CERAMICS INTERNATIONAL (2021)

Article Multidisciplinary Sciences

Naturally diffused sintering aid for highly conductive bilayer electrolytes in solid oxide cells

Junseok Kim et al.

Summary: Solid oxide cells with a bilayer electrolyte structure have been successfully fabricated at lower sintering temperature, demonstrating high performance and defect-free characteristics. The resulting cells show minimal ohmic loss and remarkable performance in both fuel cell and electrolysis operations.

SCIENCE ADVANCES (2021)

Article Chemistry, Physical

Praseodymium based double-perovskite cathode nanofibers for intermediate temperature solid oxide fuel cells (IT-SOFC)

Cenk Gumeci et al.

Summary: The research demonstrated that the Praseodymium-based double perovskite oxide cathode nanofibers showed promising performance in improving the kinetics of the oxygen reduction reaction. The results indicated that nanofiber structures could be a suitable cathode material choice for intermediate-temperature solid oxide fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Multidisciplinary

Exceptionally high performance of protonic ceramic fuel cells with stoichiometric electrolytes

Mingi Choi et al.

Summary: Researchers have successfully developed a new protonic ceramic fuel cell electrolyte with high electrochemical performance, surpassing values of previously reported PCFCs without the need for complex engineering, which has advanced the technology in this field.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Materials Science, Ceramics

Electrospun composite nanofibers for intermediate-temperature solid oxide fuel cell electrodes

Minwoo Ahn et al.

CERAMICS INTERNATIONAL (2020)

Article Nanoscience & Nanotechnology

Engineering of Charged Defects at Perovskite Oxide Surfaces for Exceptionally Stable Solid Oxide Fuel Cell Electrodes

Mingi Choi et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Ex-Solved Ag Nanocatalysts on a Sr-Free Parent Scaffold Authorize a Highly Efficient Route of Oxygen Reduction

Jun Hyuk Kim et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Materials Science, Ceramics

Modifying defect structures at interfaces for high-performance solid oxide fuel cells

Seo Ju Kim et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Chemistry, Multidisciplinary

Enhanced Cr tolerance of perovskite oxide via Gd0.1Ce0.9O2surface modifications

Mingi Choi et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2020)

Article Chemistry, Physical

Tailoring defect chemistry at interfaces for promoted oxygen reduction reaction kinetics

Seo Ju Kim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Enhancement of Ni-(Y2O3)0.08(ZrO2)0.92 fuel electrode performance by infiltration of Ce0.8Gd0.2O2-δ nanoparticles

Beom-Kyeong Park et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Materials Science, Ceramics

Optimization of laser-patterned YSZ-LSM composite cathode-electrolyte interfaces for solid oxide fuel cells

J. A. Cebollero et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Chemistry, Physical

One-step fabrication of composite nanofibers for solid oxide fuel cell electrodes

Minwoo Ahn et al.

JOURNAL OF POWER SOURCES (2019)

Review Chemistry, Physical

Anionic defect engineering of transition metal oxides for oxygen reduction and evolution reactions

Yunmin Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Nanoscience & Nanotechnology

Suppression of Cation Segregation in (La,Sr)CoO3-delta, by Elastic Energy Minimization

Ja Yang Koo et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Physical

Nano-film coated cathode functional layers towards high performance solid oxide fuel cells

Mingi Choi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

A Highly Efficient and Robust Nanofiber Cathode for Solid Oxide Fuel Cells

Yu Chen et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Nanofiber-based composite cathodes for intermediate temperature solid oxide fuel cells

Minwoo Ahn et al.

JOURNAL OF POWER SOURCES (2017)

Article Chemistry, Physical

Corn-cob like nanofibres as cathode catalysts for an effective microstructure design in solid oxide fuel cells

Yukwon Jeon et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Review Chemistry, Multidisciplinary

Enhancing SOFC cathode performance by surface modification through infiltration

Dong Ding et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Impact of segregation energetics on oxygen conductivity at ionic grain boundaries

Dilpuneet S. Aidhy et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Multidisciplinary

Oxygen Surface Exchange at Grain Boundaries of Oxide Ion Conductors

Wonyoung Lee et al.

ADVANCED FUNCTIONAL MATERIALS (2012)

Article Chemistry, Physical

Low-temperature, solution-processed metal oxide thin film transistors

Sunho Jeong et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Review Multidisciplinary Sciences

Lowering the Temperature of Solid Oxide Fuel Cells

Eric D. Wachsman et al.

SCIENCE (2011)

Article Chemistry, Physical

Performance of metal-supported SOFCs with infiltrated electrodes

Michael C. Tucker et al.

JOURNAL OF POWER SOURCES (2007)

Article Materials Science, Ceramics

Low-temperature fabrication of oxide composites for solid-oxide fuel cells

HP He et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)

Review Chemistry, Multidisciplinary

Factors governing oxygen reduction in solid oxide fuel cell cathodes

SB Adler

CHEMICAL REVIEWS (2004)

Article Materials Science, Multidisciplinary

Grain size dependent grain boundary defect structure: case of doped zirconia

X Guo et al.

ACTA MATERIALIA (2003)