☆ 4.7 Article

Study on modified poplar wood powder/polylactic acid high toughness green 3D printing composites

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Biochemistry & Molecular Biology

Preparation of glycidyl methacrylate grafted starch adhesive to apply in high-performance and environment-friendly plywood

Xiaojian Chen et al.

Summary: In this study, cassava starch was used to prepare environmentally friendly and high-performance starch-based adhesives. The grafting and cross-linking reactions improved the hydrophobicity and wet shear strength of the adhesive. Plywood made with the modified starch adhesive showed better mechanical properties and performance.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

添加到收藏夹

Review Agricultural Engineering

Rapid quantification of intracellular polyhydroxyalkanoates via fluorescence techniques: A critical review

Jia-Shun Cao et al.

Summary: Polyhydroxyalkanoates (PHA) are promising bioplastics with excellent physicochemical properties and biodegradability, but suffer from high manufacturing costs. To reduce costs, researchers have conducted experiments with mixed microbial cultures and low-cost substrates, requiring rapid and reliable PHA quantification methods. This review provides a comprehensive understanding of PHA fluorescence quantification (PHA-FQ) methods, including performance evaluation, spectral properties, staining procedures, and current developments, aiming to aid researchers in improving PHA-FQ methods.

BIORESOURCE TECHNOLOGY (2022)

添加到收藏夹

Article Polymer Science

Preparation and properties of PBAT/PLA composites modified by PVA and cellulose nanocrystals

Hailu Liu et al.

Summary: In this study, cellulose nanocrystal (CNC) was prepared through the hydrolysis of concentrated sulfuric acid and tested for performance. The CNC-TPVA prepared using the melt blending method showed improved mechanical properties and anti-aging performance during UV aging compared to TPVA.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Polymer Science

Influence of sericin-g-PLA as an organic nucleating agent for preparing biodegradable blend films

Kanittha Boonpavanitchakul et al.

Summary: This work demonstrates that the incorporation of sericin-g-polylactide (SS-g-PLA) copolymer into polylactide (PLA) matrix can enhance the crystallinity and biodegradability of PLA. The blended films of PLA/SS-g-PLA exhibit lower water vapor permeability, improved thermal behavior, increased crystallinity, and higher biodegradability compared to commercial PLA films.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Engineering, Manufacturing

An investigation of PLA/W parts quality fabricated by FFF

Dimitrios Chaidas et al.

Summary: The study examined the effects of nozzle temperature and layer thickness on the surface quality and dimensional accuracy of wood-flour PLA composite material. Lower values of layer thickness and nozzle temperature were found to optimize both surface quality and dimensional accuracy.

MATERIALS AND MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Engineering, Environmental

Modified Cellulose Nanocrystals Enhanced the Compatibility Between PLA and PBAT to Prepare a Multifunctional Composite Film

Ce Sun et al.

Summary: PLA, PBAT, and SCNC were used to prepare a multifunctional composite film, which showed improved compatibility, mechanical properties, water vapor transmission rate, migration rate, and UV resistance compared to PLA film.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2022)

添加到收藏夹

Article Engineering, Chemical

Development of PA6/GO microspheres with good processability for SLS 3D printing

Bozhen Wu et al.

Summary: In this study, PA6/GO microspheres suitable for SLS 3D printing were fabricated via reaction-induced phase separation. The particle size and morphology of the microspheres could be controlled, improving their sintering window and thermal stability. These findings are significant for the development of new nylon SLS 3D printing materials.

POLYMER ENGINEERING AND SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance of composite materials by wood fiber/polydopamine/silver modified PLA and the antibacterial property

Jiyuan Zhou et al.

Summary: Inspired by marine mussels, dopamine with a catechol structure was self-polymerized and deposited on the surface of wood fiber to enhance the interface between wood fiber and polylactic acid. Additionally, silver nanoparticles were attached to the wood fiber surface under the reducibility of polydopamine, providing antibacterial activity against Aspergillus niger.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Comparison of Properties of Poly(Lactic Acid) Composites Prepared from Different Components of Corn Straw Fiber

Zhongyu Qi et al.

Summary: The development and utilization of biodegradable wood-plastic composites (WPC) has become a hot topic in research due to resource shortage and white pollution. In this study, corn straw fiber (CSF) was chosen to reinforce a poly(lactic acid) (PLA) matrix, and the CSF/PLA composites were obtained through melt mixing. The results showed that when the particle size of CSF was low, the mechanical properties of the CSFC and CSFS loaded PLA composites were stronger than those of the CSFS/PLA composites. The CSF/PLA composite exhibited good hydrophobicity and water absorption saturation. Observing the microstructure of the composite, it was found that the smaller the particle size of CSF, the smoother the cross section of the composite and the more unified the dispersion of CSF in PLA.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

添加到收藏夹

Article Polymer Science

Triblock Copolymer Compatibilizers for Enhancing the Mechanical Properties of a Renewable Bio-Polymer

Guilian Xue et al.

Summary: This study aimed to improve the strength and toughness of PLA/basalt fiber composites. By melt-blending PBAT and MDI as compatibilizers, the interfacial adhesion and performance of PLA/BF composites were effectively improved.

POLYMERS (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Preparation and mechanism of lightweight wood fiber/poly(lactic acid) composites

Baiwang Wang et al.

Summary: In this paper, lightweight WF/PLA composites were prepared using wood fiber and PLA as raw materials and azodicarbonamide as the foaming agent. The composites exhibited excellent mechanical properties and thermal insulation performance, making them suitable for replacing traditional wood in the construction field.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

添加到收藏夹

Article Thermodynamics

The role of graphene on thermally induced shape memory properties of poly(lactic acid) extruded composites

Willian Hermogenes Ferreira et al.

Summary: The addition of rGO in PLA improved the crystallinity and thermal stability, increased molecular mobility, and significantly enhanced the thermally induced shape memory properties.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Thin-structured and compostable wood fiber-polymer biocomposites: Fabrication and performance evaluation

Binh M. Trinh et al.

Summary: Poly(lactic acid) was used as a binder for wood fibers to create thin-structured biocomposites with improved mechanical properties and water resistance. The composites showed potential for applications such as compostable crates and thermo-formable sheets for single use food utensils.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Review Chemistry, Physical

3D printing of carbon-based materials: A review

P. Blyweert et al.

Summary: 3D printing offers rapid prototyping and customization, but faces challenges when applied to carbon-based materials. This review explores the latest advances in this field, focusing on material tailoring, porosity control, and direct printing of pure carbon. The research provides insights into additive manufacturing processes, structural characteristics, and applications of various carbon-based composites and materials, with prospects for future development.

CARBON (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Waste office paper filled polylactic acid composite filaments for 3D printing

Yubo Tao et al.

Summary: Developing 3D printable waste paper based biocomposites as a greener alternative to traditional recycling methods, the study found that adding waste office paper (WOP) improved melt flow abilities of composites. However, increasing WOP content resulted in decreased tensile strengths of prints, which were significantly enhanced post KH570 treatment.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Food Science & Technology

The fabrication of a novel film based on polycaprolactone incorporated with chitosan and rutin: potential as an antibacterial carrier for rainbow trout packaging

Homeyra Piri et al.

Summary: This study fabricated novel films using rutin and chitosan, which showed better antibacterial and antioxidant properties and significantly reduced the populations of L. monocytogenes, S. aureus, and E. coli in rainbow trout samples.

FOOD SCIENCE AND BIOTECHNOLOGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on wood powders in 3D printing: processes, properties and potential applications

Atanu Kumar Das et al.

Summary: Wood powder, as a raw material for 3D printing, can reduce costs and increase sustainability when combined with natural binders. However, further research is needed to explore the potential for future applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Polymer Science

3D printing of shape memory polymers

Guido Ehrmann et al.

Summary: Shape memory polymers (SMPs) are a type of polymers that can ''remember'' their original shape and return to it after deformation with an external stimulus. Some SMPs can be 3D printed, offering a wide range of potential applications.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Polymer Science

Influence of the blending method over the thermal and mechanical properties of biodegradable polylactic acid/polyhydroxybutyrate blends and their wood biocomposites

Aida A. Perez-Fonseca et al.

Summary: The study found that the addition of PHB and wood particles significantly increased the crystallinity of PLA, while twin-screw extrusion and compatibilization treatment improved the tensile, flexural, and impact strength of the blends. The biodegradation rate of the biocomposites slightly decreased with the addition of PHB or wood particles.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

添加到收藏夹

Article Polymer Science

PBAT/PLA/cellulose nanocrystals biocomposites compatibilized with polyethylene grafted maleic anhydride (PE-g-MA)

Fabio Caixeta Nunes et al.

Summary: A biodegradable biocomposite of PBAT and PLA containing CNC was obtained in this study, with PE-g-MA as a coupling agent. Results showed improved adhesion among components using PE-g-MA, increased PLA crystallinity, and reduced complex viscosity with the addition of CNC and PE-g-MA. These findings open up new possibilities for the utilization of biodegradable mixtures using PBAT/PLA and CNC.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Materials Science, Composites

Physical, mechanical, and thermal properties of Dalbergia sissoo wood waste-filled poly(lactic acid) composites

Tej Singh et al.

Summary: The study found that increasing wood waste content resulted in certain properties of the composite materials increasing, such as modulus, porosity, and water absorption, while other properties decreased such as density, tensile strength, impact strength, and stress at break. However, the flexural strength of the composites remained relatively constant. Differential scanning calorimetry analysis showed that wood waste helped increase the glass transition and cold crystallization temperature of PLA composites.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Chemistry, Physical

Discharge Plasma Treatment as an Efficient Tool for Improved Poly(lactide) Adhesive-Wood Interactions

Mariusz L. Maminski et al.

Summary: The study demonstrated that modifying Poly(lactide) (PLA) films using diffuse coplanar surface barrier discharge plasma improved the lap shear strength and adhesion properties in joints in oak wood, revealing changes in the surface properties of the treated PLA, and confirming the effectiveness of the plasma treatment in enhancing adhesive interactions.

MATERIALS (2021)

添加到收藏夹

Article Pediatrics

Development levels of pediatric palliative care teams and the extent of palliative care understanding and implementation among pediatric oncologists in China

Siyu Cai et al.

Summary: Pediatric palliative care is an important interdisciplinary collaboration in the prevention and relief of patient suffering. However, in China, there is an uneven distribution of PPC teams with limited staff and services. Most pediatric oncologists have limited understanding and practical implementation of PPC, resulting in underutilization of resources.

PEDIATRIC INVESTIGATION (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effects of Selected Printing Parameters on the Fire Properties of 3D-Printed Neat Polylactic Acid (PLA) and Wood/PLA Composites

Natasa Knez et al.

Summary: The study investigated the effects of selected printing parameters on the fire properties of additively produced composites from PLA and wood/PLA filaments. Results showed that the incorporation of wood flour into PLA significantly affected the properties of specimens exposed to fire, with PLA specimens exhibiting better reactions to fire and longer time to ignition compared to wood/PLA specimens. Additionally, while the maximal heat release rate was slightly higher in the PLA specimens, the duration of HRR was longer for wood/PLA specimens.

JOURNAL OF RENEWABLE MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interfacial Adhesion of Polylactic Acid on Cellulose Surface: A Molecular Dynamics Study

Zechun Ren et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Engineering, Environmental

Quantification of Synthetic Polyesters from Biodegradable Mulch Films in Soils

Taylor F. Nelson et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Favorable Thermoresponsive Shape Memory Effects of 3D Printed Poly(Lactic Acid)/Poly(ε-Caprolactone) Blends Fabricated by Fused Deposition Modeling

Hao Liu et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on the properties of PLA/PBAT composite modified by nanohydroxyapatite

Dongsheng Yan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning the mechanical properties and degradation properties of polydioxanone isothermal annealing

Xiliang Liu et al.

TURKISH JOURNAL OF CHEMISTRY (2020)

添加到收藏夹

Article Construction & Building Technology

Preparation of isocyanate microcapsules as a high-performance adhesive for PLA/WF

Yangbao Ma et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Paper & Wood

Performance Comparison of Four Kinds of Straw/PLA/PBAT Wood Plastic Composites

Jianan Feng et al.

BIORESOURCES (2020)

添加到收藏夹

Article Materials Science, Textiles

Tailoring PBAT/PLA/Babassu films for suitability of agriculture mulch application

Danyelle C. Franca et al.

JOURNAL OF NATURAL FIBERS (2019)

添加到收藏夹

Article Polymer Science

Composites of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with wood fiber and wollastonite: Physical properties, morphology, and biodegradability

Phasawat Chaiwutthinan et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

添加到收藏夹

Article Engineering, Environmental

3D printed PCL/SrHA scaffold for enhanced bone regeneration

Dinghua Liu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Polymer Science

Preparation and Characterization of 3D Printed PLA-Based Conductive Composites Using Carbonaceous Fillers by Masterbatch Melting Method

Rui Guo et al.

POLYMERS (2019)

添加到收藏夹

Article Materials Science, Composites

Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite

Evi Triwulandari et al.

PLASTICS RUBBER AND COMPOSITES (2019)

添加到收藏夹

Article Materials Science, Composites

Effect of in situ reactive interfacial compatibilization on structure and properties of polylactide/sisal fiber biocomposites

Mingyang Hao et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Preparation of plasticized poly (lactic acid) and its influence on the properties of composite materials

Decai Li et al.

PLOS ONE (2018)

添加到收藏夹

Article Materials Science, Composites

Preparation and selective laser sintering of bamboo flour/copolyester composite and post-processing

Dejin Zhao et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)

添加到收藏夹

Article Engineering, Chemical

Temperature-dependent mechanical properties of wood-adhesive bondline evaluated by nanoindentation

Xinzhou Wang et al.

JOURNAL OF ADHESION (2017)

添加到收藏夹

Article Engineering, Chemical

Adhesive bonding of 3D-printed ABS parts and wood

Mirko Kariz et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Polymer Science

Incorporation of graphitic nano-filler and poly(lactic acid) in fused deposition modeling

Wang Wang Yu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

In situ reactive interfacial compatibilization of polylactide/sisal fiber biocomposites via melt-blending with an epoxy-functionalized terpolymer elastomer

Mingyang Hao et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling

Jie Zhang et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Polymer Science

Bleached extruder chemi-mechanical pulp fiber-PLA composites: Comparison of mechanical, thermal, and rheological properties with those of wood flour-PLA bio-composites

Zhaozhe Yang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

添加到收藏夹

Article Agricultural Engineering

Compostability and biodegradation study of PLA-wheat straw and PLA-soy straw based green composites in simulated composting bioreactor

Ranjan Pradhan et al.

BIORESOURCE TECHNOLOGY (2010)

添加到收藏夹

Article Polymer Science

Properties of thermoplastic composites based on wheat-straw lignocellulosic fillers

F Le Digabel et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.