相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Recent trend in developing advanced fiber metal laminates reinforced with nanoparticles: A review study
Reza Eslami-Farsani et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
Tensile mechanical behavior and failure mechanisms of fiber metal laminates under various temperature environments
Lu Yao et al.
COMPOSITE STRUCTURES (2022)
Morphing wing flaps for large civil aircraft: Evolution of a smart technology across the Clean Sky program
Rosario Pecora
CHINESE JOURNAL OF AERONAUTICS (2021)
Mechanical properties and failure mode of thin-ply fiber metal laminates under out-of-plane loading
Kohei Yamada et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Interlaminar mechanical properties of nano- and short-aramid fiber reinforced glass fiber-aluminum laminates: a comparative study
Xinyu Qi et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Dynamic Tensile Stress-Compressive Stress Behavior of Thermoplastic Matrix Composite Materials Reinforced with Continuous Fiber for Automotive Damping and Anti-Vibration Structural Elements
D. Tobalina-Baldeon et al.
MATERIALS (2020)
A numerical-experimental assessment on a composite fuselage barrel vertical drop test: Induced damage onset and evolution
A. Riccio et al.
COMPOSITE STRUCTURES (2020)
Tensile mechanical behavior and failure mechanisms of multihole fiber metal laminates-Experimental characterization and numerical prediction
Wentao He et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2020)
Effects of strain rate and high temperature environment on the mechanical performance of carbon fiber reinforced thermoplastic composites fabricated by hot press molding
Yiben Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Investigation into effect of the graphene oxide addition on the mechanical properties of the fiber metal laminates
Lei Li et al.
POLYMER TESTING (2020)
The residual stress characteristics and mechanical behavior of shot peened fiber metal laminates based on the aluminium-lithium alloy
Huaguan Li et al.
COMPOSITE STRUCTURES (2020)
Strain rate effects on mechanical properties of Fe-10Mn-5Al-0.5C steel
Z. P. He et al.
KOVOVE MATERIALY-METALLIC MATERIALS (2020)
Review of Practices to Integrate Aircraft Mass Properties Management and Development Processes
Vera de Paula et al.
JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT (2020)
Low velocity impact response of fibre metal laminates based on aramid fibre reinforced polypropylene
J. G. Carrillo et al.
COMPOSITE STRUCTURES (2019)
Effects of applying a combination of surface treatments on the mechanical behavior of basalt fiber metal laminates
M. Emami Mehr et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Effect of Linseed (Linum usitatissimum) Mucilage and Chitosan Edible Coatings on Quality and Shelf-Life of Fresh-Cut Cantaloupe (Cucumis melo)
Mayra Z. Trevino-Garza et al.
COATINGS (2019)
Characterization and properties of AA6061-based fiber metal laminates with different aluminum-surface pretreatments
Wei Zhu et al.
COMPOSITE STRUCTURES (2019)
Mechanical properties of Ti/CF/PMR polyimide fiber metal laminates with various layup configurations
Yubing Hu et al.
COMPOSITE STRUCTURES (2019)
Mechanical properties of a novel fiber metal laminate based on a carbon fiber reinforced Zn-Al alloy composite
Xinwei Hao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Tensile failure of fibre-metal-laminates made of titanium and carbon-fibre/epoxy laminates
Jing Sun et al.
MATERIALS & DESIGN (2019)
Mechanical Properties and Applications of Fibre Metal Laminates
A. M. Mukesh et al.
ADVANCES IN BASIC SCIENCES (ICABS 2019) (2019)
The Effects of Temperature Variation on Mechanical Behaviors of Polyetheretherketone-Based Fiber Metal Laminates
Yubing Hu et al.
POLYMER COMPOSITES (2018)
Mechanical Properties of Fibre-Metal Laminates Made of Natural/Synthetic Fibre Composites
Ibrahim Mohammed et al.
BIORESOURCES (2018)
Fabrication of high-stiffness fiber-metal laminates and study of their behavior under low-velocity impact loadings
Dong-Woo Lee et al.
COMPOSITE STRUCTURES (2018)
Effect of through thickness metal layer distribution on the low velocity impact response of fiber metal laminates
Ankush P. Sharma et al.
POLYMER TESTING (2018)
Effect of prepreg gaps and overlaps on mechanical properties of fibre metal laminates
M. Abouhamzeha et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Carbon nanotubes for enhanced interface of fiber metal laminate
A. A. Khurram et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
S. Singh et al.
INTERNATIONAL JOURNAL OF ENGINEERING (2018)
Galvanic Corrosion and Mechanical Behavior of Fiber Metal Laminates of Metallic Glass and Carbon Fiber Composites
Lee Hamill et al.
ADVANCED ENGINEERING MATERIALS (2018)
An experimental review on the mechanical properties and hygrothermal behaviour of fibre metal laminates
M. Chandrasekar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Low-velocity impact damage response of fiberglass/magnesium fiber-metal laminates under different size and shape impactors
Davide De Cicco et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2017)
Note on the impact behaviour of fibre-metal laminates
Norman Jones
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
A study on fiber metal laminates by using a new damage model for composite layer
M. Kashfi et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Mechanical characterization of fiber metal laminate based on aramid fiber reinforced polypropylene
N. G. Gonzalez-Canche et al.
COMPOSITE STRUCTURES (2017)
Impact behaviour of glass fibre-reinforced epoxy/aluminium fibre metal laminate manufactured by Vacuum Assisted Resin Transfer Moulding
I. Ortiz de Mendibil et al.
COMPOSITE STRUCTURES (2016)
Improvement of adhesion performance between aluminum alloy sheet and epoxy based on anodizing technique
Yiwei Xu et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Effect of MWCNT filled epoxy adhesives on the quality of adhesively bonded joints
M. Konstantakopoulou et al.
PLASTICS RUBBER AND COMPOSITES (2016)
Dry Machining Aeronautical Aluminum Alloy AA2024-T351: Analysis of Cutting Forces, Chip Segmentation and Built-Up Edge Formation
Badis Haddag et al.
METALS (2016)
Low-energy impact behaviour and damage characterization of carbon fibre reinforced polymer and aluminium hybrid laminates
J. Bienias et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2015)
Comparative study of FML profiles buckling and postbuckling behaviour under axial loading
Radoslaw J. Mania et al.
COMPOSITE STRUCTURES (2015)
Low-velocity impact response of fiberglass/magnesium FMLs with a new 3D fiberglass fabric
Zohreh Asaee et al.
COMPOSITE STRUCTURES (2015)
Experimental characterization of a fiber metal laminate for underwater applications
E. Poodts et al.
COMPOSITE STRUCTURES (2015)
Microstructure and tensile properties of carbon-epoxy laminates produced by automated fibre placement: Influence of a caul plate on the effects of gap and overlap embedded defects
Marine Lan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
An experimental study on fatigue characteristics of CFRP-steel hybrid laminates
Qiang Liu et al.
MATERIALS & DESIGN (2015)
The effect of impact energy division over repeated low-velocity impact on fiber metal laminates
M. Haghi Kashani et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Impact Behaviour of GLAREs with MWCNT Modified Epoxy Resins
H. Zhang et al.
EXPERIMENTAL MECHANICS (2014)
Monitoring the integrity of adhesive joints during fatigue loading using carbon nanotubes
Roham Mactabi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Crack paths in fibre metal laminates: Role of fibre bridging
M. Gupta et al.
ENGINEERING FRACTURE MECHANICS (2013)
Investigation on the high velocity impact properties of glass-reinforced fiber metal laminates
H. Ahmadi et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
An investigation on blunt notch behavior of fiber metal laminates containing notch with different shapes
Ebrahim Sadeghpour et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Low-impulse blast behaviour of fibre-metal laminates
T. P. Vo et al.
COMPOSITE STRUCTURES (2012)
Applicability of AZ31B-H24 magnesium in Fibre Metal Laminates - An experimental impact research
T. Parnanen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Improved Adhesives Containing CNT/SP1 Nano Fillers
A. Wolf et al.
JOURNAL OF ADHESION (2012)
The effect of thermal cycles on the mechanical properties of fiber-metal laminates
Adriana A. da Costa et al.
MATERIALS & DESIGN (2012)
The fracture properties of environmental-friendly fiber metal laminates
H. T. N. Kuan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
The effects of void contents on the long-term hygrothermal behaviors of glass/epoxy and GLARE laminates
Sang Yoon Park et al.
COMPOSITE STRUCTURES (2010)
A study on tensile properties of a novel fiber/metal laminates
S. Ebrahim Moussavi-Torshizi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
High strain rate tensile behavior of woven fabric E-glass/epoxy composite
N. K. Naik et al.
POLYMER TESTING (2010)
Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites
A. Godara et al.
CARBON (2009)
Fatigue crack growth in fibre metal laminates under selective variable-amplitude loading
H. M. Plokker et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints
S. G. Prolongo et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
Hygrothermal Aging Effect on Fatigue Behavior of GLARE
D. A. Da Silva et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Fiber/metal composite technology for future primary aircraft structures
R. C. Alderliesten et al.
JOURNAL OF AIRCRAFT (2008)
Fatigue crack initiation in hybrid boron/glass/aluminum fiber metal laminates
Po-Yu Chang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Mechanical behavior of glass-fiber reinforced thermoplastic materials under high strain rates
Marcus Schossig et al.
POLYMER TESTING (2008)
Scaling effects in the tensile behavior of fiber-metal laminates
J. G. Carrillo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Mechanical behavior of lightweight thermoplastic fiber-metal laminates
G. Reyes et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Development of Fibre Metal Laminates: concurrent multi-scale modeling and testing
J. Sinke
JOURNAL OF MATERIALS SCIENCE (2006)
Effects of R-ratio on the off-axis fatigue behavior of unidirectional hybrid GFRP/Al laminates at room temperature
M. Kawai et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Numerical analysis of rate-dependent dynamic composite delamination
A Corigliano et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
The fracture properties of a fibre-metal laminate based on magnesium alloy
P Cortes et al.
COMPOSITES PART B-ENGINEERING (2006)
A study of the mechanical properties of steel/aluminium/GRP laminates
SMR Khalili et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Application of neutron generators for high explosives, toxic agents and fissile material detection
VD Aleksandrov et al.
APPLIED RADIATION AND ISOTOPES (2005)
The mechanical behavior of GLARE laminates for aircraft structures
GC Wu et al.
JOM (2005)
Mechanical behaviour of glass and carbon fibre reinforced composites at varying strain rates
RO Ochola et al.
COMPOSITE STRUCTURES (2004)
Long term behaviour of Glare
B Borgonje et al.
APPLIED COMPOSITE MATERIALS (2003)
An historic overview of the development of fibre metal laminates
CAJR Vermeeren
APPLIED COMPOSITE MATERIALS (2003)
Static properties of fibre metal laminates
M Hagenbeek et al.
APPLIED COMPOSITE MATERIALS (2003)
Three-dimensional modeling of intersonic shear-crack growth in asymmetrically loaded unidirectional composite plates
C Yu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2002)
Experimental study of strain-rate-dependent behavior of carbon/epoxy composite
A Gilat et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
The effects of strain rate and failure modes on the failure energy of fibre reinforced composites
OI Okoli
COMPOSITE STRUCTURES (2001)
High strain rate compression response of carbon/epoxy laminate composites
MV Hosur et al.
COMPOSITE STRUCTURES (2001)
Delamination buckling of fibre-metal laminates
JJC Remmers et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Development of fibre metal laminates for advanced aerospace structures
LB Vogelesang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
The mechanical properties of fibre-metal laminates based on glass fibre reinforced polypropylene
G Reyes et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)