☆ 4.6 Article

Experimental investigation on tool wear in ultrasonic vibration-assisted turning of SiCf/SiC ceramic matrix composite

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Green ceramic machining benefits through ultrasonic-assisted turning: an experimental investigation

Marcos Goncalves Junior et al.

Summary: Ultrasonic-assisted machining on ceramic materials in a green state improves surface finish, reduces machining forces, and decreases tool wear. Compared to conventional turning, ultrasonic-assisted turning provides process benefits through improved surface finish, reduced tool flank wear, and decreased machining forces, when cutting parameters are properly set.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Feasibility and tool performance of ultrasonic vibration-assisted milling-grinding SiCf/SiC ceramic matrix composite

Yi-feng Xiong et al.

Summary: This study investigates the ultrasonic vibration-assisted milling-grinding of SiC fiber reinforced ceramic matrix composite. The results show that the ultrasonic vibration-assisted machining technique is advantageous for machining this material, and the self-designed polycrystalline diamond compact tool achieves longer tool life.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Engineering, Aerospace

Machining of SiC ceramic matrix composites: A review

Qinglong An et al.

Summary: FRCMCs-SiC, as the preferred material for hot section components, safety-critical components, and braking components, faces challenges in machining due to high brittleness, anisotropy, and heterogeneity. With increasing demand for FRCMCs-SiC parts, high-quality and high-efficient machining has become a hot issue.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Article Acoustics

Effect of radial high-speed ultrasonic vibration cutting on machining performance during finish turning of hardened steel

Zhenlong Peng et al.

Summary: In this study, radial high-speed ultrasonic vibration cutting (R-HUVC) process was adopted to improve the machining performance of finishing hardened steel. Experimental results showed that R-HUVC can achieve lower cutting force, longer tool life, and better surface roughness compared to conventional cutting (CC). It was demonstrated that R-HUVC can be applied to high-speed machining for the finish turning of hardened steel due to its improved machining performance.

ULTRASONICS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Analysis on ground surface in ultrasonic face grinding of silicon carbide (SiC) ceramic with minor vibration amplitude

Chenwei Dai et al.

Summary: Ultrasonic face grinding of SiC ceramic has been proven to improve machining efficiency, with the choice of vibration amplitude playing a critical role in workpiece surface quality. An amplitude less than 0.2 µm can reduce chunks and pits on the workpiece surface.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Engineering, Manufacturing

Influence of ultrasonic vibration assistance in manufacturing processes: A Review

Pankaj Sonia et al.

Summary: High precision and close tolerance are essential requirements for current manufacturing industries, especially in micro-fabrication. The continuous development of various materials and alloys aims to fulfill the application needs in critical conditions. Ultrasonic vibration assistance has been extensively applied in numerous manufacturing processes, demonstrating significant improvements in process performance.

MATERIALS AND MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Chemistry, Physical

Experimental Study on High-Speed Milling of SiCf/SiC Composites with PCD and CVD Diamond Tools

Bin Zhang et al.

Summary: This study investigated high-speed milling of SiCf/SiC composites under dry and cryogenic cooling conditions, utilizing PCD and CVD diamond cutting tools. It found that the PCD tool outperformed the CVD diamond tool in terms of tool life and surface quality, and that both tools experienced reduced wear and improved surface quality in cryogenic machining.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tool Wear Analysis during Ultrasonic Assisted Turning of Nimonic-90 under Dry and Wet Conditions

Jay Airao et al.

Summary: Nickel-based superalloys are widely used due to their high mechanical strength and corrosion resistance, but exhibit poor machinability. Ultrasonic assisted turning (UAT) is a modification used to improve machining performance. Research on UAT's effect on tool wear during machining of Nimonic-90 shows that UAT performed better in reducing tool wear under dry conditions.

METALS (2021)

添加到收藏夹

Article Automation & Control Systems

Experimental study on tool wear in ultrasonic vibration-assisted milling of C/SiC composites

Yang Liu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Industrial

Study on mechanism and theoretical model of tool wear in fluorophlogopite glass-ceramics turning

Lianjie Ma et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Review Engineering, Manufacturing

Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives

Fuda Ning et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Manufacturing

Tool wear rate prediction in ultrasonic vibration-assisted milling

Yixuan Feng et al.

MACHINING SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Review Engineering, Manufacturing

The new challenges of machining Ceramic Matrix Composites (CMCs): Review of surface integrity

Oriol Gavalda Diaz et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

添加到收藏夹

Article Engineering, Mechanical

A mechanistic model on feeding-directional cutting force in surface grinding of CFRP composites using rotary ultrasonic machining with horizontal ultrasonic vibration

Hui Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rotary ultrasonic milling of C/SiC composites fabricated using chemical vapor infiltration and needling technique

Atul Babbar et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A review of third generation SiC fibers and SiCf/SiC composites

Pengren Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Prediction model of tool wear volume in precision turning of ceramic particle reinforced aluminum matrix composites

H. Z. Liu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

Feasibility Study of Longitudinal-Torsional-Coupled Rotary Ultrasonic Machining of Brittle Material

Jianjian Wang et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on the tool wear and its effect of PCD tool in micro milling of tungsten carbide

Xian Wu et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)

添加到收藏夹

Article Engineering, Aerospace

Prediction of cutting forces in ball-end milling of 2.5D C/C composites

Shan Chenwei et al.

CHINESE JOURNAL OF AERONAUTICS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Thermo-mechanical properties of C/SiC composite structure under extremely high temperature environment up to 1500 °C

Dafang Wu et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Mechanical

Study on wear of diamond wheel in ultrasonic vibration-assisted grinding ceramic

J. Y. Shen et al.

WEAR (2015)

添加到收藏夹

Article Engineering, Manufacturing

Fundamental Machining Characteristics of Ultrasonic Assisted Internal Grinding of SiC Ceramics

Jianguo Cao et al.

MATERIALS AND MANUFACTURING PROCESSES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hot-press sintering temperature response of diamond cutting tools and its correlation with wear mechanism

N. B. Dhokey et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)

添加到收藏夹

Review Engineering, Manufacturing

ULTRASONIC MACHINING-A COMPREHENSIVE REVIEW

Jatinder Kumar

MACHINING SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Proceedings Paper Computer Science, Interdisciplinary Applications

Turning CFRP Composites with Ceramic tool for Surface Roughness Analysis

T. Rajasekaran et al.

INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING (2012)

添加到收藏夹

Article Engineering, Industrial

A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool

D. K. Sarma et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites

K. Palanikumar et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Engineering, Manufacturing

Experimental observation of tool wear in rotary ultrasonic machining of advanced ceramics

WM Zeng et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)

添加到收藏夹

Article Engineering, Industrial

Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite

E Kiliçkap et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

添加到收藏夹

Article Chemistry, Physical

Structural modifications of carbon-carbon composites under high temperature and ion irradiation

T Paulmier et al.

APPLIED SURFACE SCIENCE (2005)

添加到收藏夹

Article Engineering, Mechanical

Tool wear acceleration in relation to workpiece reinforcement percentage in cutting of metal matrix composites

XP Li et al.

WEAR (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.