4.7 Article

Convective-radiative magnetized dissipative nanofluid (CNTs-water) transport in porous media, using Darcy-Brinkman-Forchheimer model

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Multidisciplinary

Nonsimilar Modeling and Numerical Simulations of Electromagnetic Radiative Flow of Nanofluid with Entropy Generation

Muzamil Hussain et al.

Summary: This study investigates the flow of electromagnetic water/CNTs nanofluid across a convectively heated moving surface, taking into account thermal radiations. The nonsimilar boundary layer concept is used to simplify the mathematical expressions, and an entropy generation model is considered to improve thermal efficiency. The numerical solution for velocity and temperature profiles is obtained, and the impacts of various factors on temperature, velocity, frictional drag, entropy generation, Nusselt number, and Bejan number are analyzed. The results show the influence of different parameters on the flow characteristics, and the originality of the findings is verified by comparing with existing research. This study is important for understanding the behavior of nanofluids in thermal transport analysis.

MATHEMATICAL PROBLEMS IN ENGINEERING (2022)

Article Engineering, Chemical

An MHD of Nanofluid Flow Over a Porous Stretching/Shrinking Plate with Mass Transpiration and Brinkman Ratio

T. Anusha et al.

Summary: The study investigates the characteristics of 2D laminar magnetohydrodynamics couple stress hybrid nanofluid on a stretching/shrinking surface embedded in porous media under an inclined magnetic field. The results have potential applications in various fields such as polymer extrusion, liquid crystal solidification, and metal spinning.

TRANSPORT IN POROUS MEDIA (2022)

Article Physics, Multidisciplinary

Nonsimilar forced convection simulations of water-copper nanofluid flow through a porous medium in the presence of thermal radiations, heat generation and viscous dissipation

Wenhao Cheng et al.

Summary: In this article, the MHD radiative nanoliquid flow in a porous media on top of a surface expanding at a nonlinear rate is investigated using nonsimilar modeling. The effects of various parameters on convection are explored and a comparison between nonsimilar and local similar estimations is made.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Article Energy & Fuels

Swimming of Gyrotactic Microorganism in MHD Williamson nanofluid flow between rotating circular plates embedded in porous medium: Application of thermal energy storage

M. M. Bhatti et al.

Summary: The presence of thermal energy storage devices in concentrated solar power plants is beneficial for controlling power and energy demand. In this study, the unsteady flow confined by parallel rotating circular plates in a porous media filled with Williamson nanofluid is investigated. The effects of magnetic fields on the flow and the relationship between various characteristics are examined.

JOURNAL OF ENERGY STORAGE (2022)

Article Thermodynamics

Heat and mass transfer analysis of nonlinear mixed convective hybrid nanofluid flow with multiple slip boundary conditions

Wei-Feng Xia et al.

Summary: This study focuses on the flow behavior of hybrid nanofluids under special conditions, providing a theoretical basis for the application of these fluids. The results show that the wall thickness parameter and Hartmann number have an impact on fluid velocity, while higher values of phi(2) can enhance heat and mass transfer.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Article Thermodynamics

Simulation of the dynamics of colloidal mixture of water with various nanoparticles at different levels of partial slip: Ternary-hybrid nanofluid

Wenhao Cao et al.

Summary: This study investigates the flow characteristics of ternary-hybrid nanofluids and their influence under temperature difference, nonlinear thermal radiation, and partial slip. The results show that partial slip reduces the friction at the wall, with the lowest decreasing rate observed in free convection. When induced by mixed convection, the increased motion of the three types of nanoparticles leads to optimal mass and heat transfer rates.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Computer Science, Interdisciplinary Applications

Unsteady MHD radiative-dissipative flow of Cu-Al2O3/H2O hybrid nanofluid past a stretching sheet with slip and convective conditions: A regression analysis

Bidyasagar Kumbhakar et al.

Summary: This study investigates the effects of nonlinear thermal radiation, viscous-Ohmic dissipation, and velocity slip on the unsteady laminar flow with heat and mass transfer. The solutions for momentum, thermal, and mass fields are obtained using the shooting method and Runge-Kutta-Fehlberg method. The graphical representations demonstrate the impacts of various parameters on the velocity, heat, and mass distributions.

MATHEMATICS AND COMPUTERS IN SIMULATION (2022)

Article Multidisciplinary Sciences

Thermal analysis for Al2O3-sodium alginate magnetized Jeffrey's nanofluid flow past a stretching sheet embedded in a porous medium

Faisal Shahzad et al.

Summary: The study focuses on MHD viscous Jeffrey heat transport flow past a permeable extending sheet, using Alumina nanoparticles immersed in sodium alginate as the base fluid. The results indicate that viscous dissipation, heat generation, and Ohmic heating affect the fluid properties, while parameters like porosity, volume fraction of nanoparticles, and Deborah number impact heat transfer and fluid velocity.

SCIENTIFIC REPORTS (2022)

Article Thermodynamics

Numerical analysis of MHD nanofluid flow and heat transfer in a circular porous medium containing a Cassini oval under the influence of the Lorentz and buoyancy forces

Bahram Jalili et al.

Summary: This study investigates the flow characteristics and heat transfer performance of magnetohydrodynamics (MHD) nanofluid in an innovative porous, circle-shaped enclosure. The results show that the volume fraction of nanoparticles, inclined angle, Lorentz, and buoyancy forces significantly affect the MHD nanofluid flow.

HEAT TRANSFER (2022)

Article Thermodynamics

Nonsimilar convective thermal transport analysis of EMHD stagnation Casson nanofluid flow subjected to particle shape factor and thermal radiations

Muzamil Hussain et al.

Summary: This article presents a novel analysis of the two-dimensional electromagnetohydrodynamic (EMHD) flow of nanofluids, considering various shape factors and simulating the velocity and temperature profiles. The results provide valuable insights for industrial applications.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Thermodynamics

Dynamics of ternary-hybrid nanofluids due to dual stretching on wedge surfaces when volume of nanoparticles is small and large: forced convection of water at different temperatures

Weirong Xiu et al.

Summary: This report investigates the flow of nanoparticles suspended in water at different temperatures. The study finds that as the volume of nanoparticles decreases, the rate of increase in local skin friction coefficients increases. Additionally, at a temperature of 80 degrees C, the heat transfer rate decreases as the volume of nanoparticles decreases, but increases as the volume of nanoparticles increases.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Physics, Multidisciplinary

Effect of magnetic and boundary parameters on flow characteristics analysis of micropolar ferrofluid through the shrinking sheet with effective thermal conductivity

Bahram Jalili et al.

Summary: This study investigates the characteristics of ferrofluid over a shrinking sheet with an effective thermal conductivity model. The magnetic and boundary parameters were found to have the same impact on velocity, while the micro-rotation parameter did not affect velocity. Comparison with other researchers' results shows the impressive accuracy and efficiency of the methods used in this study.

CHINESE JOURNAL OF PHYSICS (2021)

Article Thermodynamics

Numerical performance of thermal conductivity in Bioconvection flow of cross nanofluid containing swimming microorganisms over a cylinder with melting phenomenon

Muhammad Imran et al.

Summary: This study investigates the effects of melting phenomena and non-linear thermal radiation in Cross nanofluid bioconvection flow with motile microorganisms over a cylinder. The mathematical model takes into account Brownian motion and thermophoresis diffusion. Numerical solutions and profiles analysis show that increasing mixed convection parameter estimates can enhance velocity, while increasing Prandtl number decreases temperature and nanoparticle concentration. A higher Peclet value is shown to lower the microorganism's profile.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Thermodynamics

Evaluating the unsteady Casson nanofluid over a stretching sheet with solar thermal radiation: An optimal case study

Wasim Jamshed et al.

Summary: The study numerically simulated the unsteady flow of a non-Newtonian Casson nanofluid on a slippery surface, discussing the effects of thermal transport and entropy, and found that thermal conductivity increases under the Casson phenomenon.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Physics, Multidisciplinary

Dynamics of aluminum oxide and copper hybrid nanofluid in nonlinear mixed Marangoni convective flow with entropy generation: Applications to renewable energy

Yun-Xiang Li et al.

Summary: The study focuses on the application of nanofluids and hybrid nanofluids in heat and mass transfer, exploring the impact of various flow parameters. The results indicate that increasing Marangoni number and radiation parameter enhances heat transfer, while an increase in heat source/sink parameter and volume fraction boosts thermal profile and mass transfer rate.

CHINESE JOURNAL OF PHYSICS (2021)

Article Engineering, Mechanical

Role of surface undulation during mixed bioconvective nanofluid flow in porous media in presence of oxytactic bacteria and magnetic fields

Dipak Kumar Mandal et al.

Summary: Thermo-bioconvection involving magnetohydrodynamic mixed bioconvection with oxytactic microorganisms suspended in copper-water nanofluid is studied in a complex enclosure. The undulating curved surface enhances heat transfer up to optimal magnitudes of undulations, and adjusting flow parameters and undulations can effectively control local and overall transport mechanisms. Bioconvection always favors heat transfer and can be found in the design of microbial fuel cells and nanotechnology-based bioconvection.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Physics, Multidisciplinary

Non-similar mixed convection analysis for magnetic flow of second-grade nanofluid over a vertically stretching sheet

Ammarah Raees et al.

Summary: This research explores the impact of non-similar modeling for mixed convection in magnetized second-grade nanofluid flow, concluding that non-similar modeling is more general and accurate than similar models in convection studies considering buoyancy effects.

COMMUNICATIONS IN THEORETICAL PHYSICS (2021)

Article Metallurgy & Metallurgical Engineering

Turbulent boundary layers and hydrodynamic flow analysis of nanofluids over a plate

Hana Aouinet et al.

Summary: A numerical analysis was conducted on the log-law behavior of the turbulent boundary layer over a flat plate immersed in three nanofluids, showing that changes in nanoparticle concentrations have an impact on velocity, temperature profiles, wall shear stress, and turbulent intensity. Additionally, the section with significant temperature changes corresponds to a decrease in thickness of the thermal boundary layer as velocity decreases.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)

Article Mathematics

Entropy Optimization of First-Grade Viscoelastic Nanofluid Flow over a Stretching Sheet by Using Classical Keller-Box Scheme

Mashhour A. Alazwari et al.

Summary: This study focuses on the flow characteristics and heat transfer models of nanofluids as heat transfer fluids under different conditions. Mathematical equations and graphs were used to analyze the factors influencing the distribution of temperature, speed, and entropy.

MATHEMATICS (2021)

Article Mathematics

A Significant Solar Energy Note on Powell-Eyring Nanofluid with Thermal Jump Conditions: Implementing Cattaneo-Christov Heat Flux Model

Nidal H. Abu-Hamdeh et al.

Summary: PTSCs are commonly used in solar-thermal applications to achieve high temperatures. This study focused on determining the entropy generation when P-ENF flows across porous media on a horizontal plane under thermal jump circumstances. The research found that changing the permeability parameter affects the fluid properties, which in turn impacts thermal efficiency. Under certain conditions, there is a correlation between the increase in heat transport rate and the decrease in entropy production.

MATHEMATICS (2021)

Article Thermodynamics

Impact of non-similar modeling on Darcy-Forchheimer-Brinkman model for forced convection of Casson nano-fluid in non-Darcy porous media

Umer Farooq et al.

Summary: In the study of boundary layer regions, dimensionless numbers are used to reduce variables and analyze the differences between similar and non-similar flows, as well as the flow across porous media in biological and environmental systems. The Darcy-Forchheimer-Brinkman model is utilized to explore the impact of various parameters on velocity, temperature, and concentration distributions in the flow. The non-similar solutions are compared with local similar solutions for validation.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Physics, Multidisciplinary

Micropolar fluid past a convectively heated surface embedded with nth order chemical reaction and heat source/sink

Tanveer Sajid et al.

Summary: This article investigates the flow of an incompressible micropolar Prandtl fluid over a porous stretching sheet, incorporating effects such as exponential temperature-dependent heat source, higher-order chemical reaction viscous dissipation, nonlinear thermal radiation, and multiple convective surface boundary conditions. The nonlinear partial differential equations (PDEs) for momentum, energy, micro-rotation, and concentration are converted into ordinary differential equations (ODEs) and solved using the nonlinear shooting method. Increasing the microrotation parameter enhances the angular velocity profile, higher order of reactivity increases the heat transmission rate, while mass convection enhances the concentration size, demonstrating potential applications in clean engine lubricants and coolant industrial liquids under the same constraints.

PHYSICA SCRIPTA (2021)

Article Thermodynamics

Numerical analysis of dual variable of conductivity in bioconvection flow of Carreau-Yasuda nanofluid containing gyrotactic motile microorganisms over a porous medium

Hassan Waqas et al.

Summary: This study focuses on the heat transfer performance of nanoliquids in thermal systems, demonstrating the impact of various parameters on the system through numerical methods. The results show that velocity is reduced by magnetic parameters and buoyancy ratio parameters, while additional thermal radiation enhances heat transfer rate, and the concentration field increases with the thermophoresis parameter.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Thermodynamics

Heat transfer analysis of CNTs-water nanofluid flow between nonparallel plates: Approximate solutions

Hamza Berrehal et al.

Summary: Approximate solutions were obtained for the problem of heat transfer and flow of a nanofluid between two nonparallel plates. Two different types of carbon nanotube nanoparticles and water as the base fluid were considered, with the effects of various emerging parameters on fluid properties analyzed comprehensively. The results were compared with those from literature and computational methods, showing excellent agreement.

HEAT TRANSFER (2021)

Article Physics, Multidisciplinary

CNTs-Nanofluid flow in a Rotating system between the gap of a disk and cone

Taza Gul et al.

PHYSICA SCRIPTA (2020)

Article Thermodynamics

Analysis of particle deposition of nanofluid flow through porous media

Ahmed Albojamal et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Chemistry, Multidisciplinary

Remarkable role of C3H8O2 on transportation of MoS2 - SiO2 hybrid nanoparticles influenced by thermal deposition and internal heat generation

Shakil Shaiq et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2019)

Article Metallurgy & Metallurgical Engineering

Heat transfer and nanofluid flow over a porous plate with radiation and slip boundary conditions

Hamid Maleki et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2019)

Article Thermodynamics

Characteristics of ferrofluid flow over a stretching sheet with suction and injection

Bahram Jalili et al.

CASE STUDIES IN THERMAL ENGINEERING (2019)

Article Engineering, Multidisciplinary

Magnetic field effect on nanofluid flow between two circular cylinders using AGM

M. Sheikholeslami et al.

ALEXANDRIA ENGINEERING JOURNAL (2018)

Review Thermodynamics

Nanofluid flow and heat transfer in porous media: A review of the latest developments

Alibakhsh Kasaeian et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Review Green & Sustainable Science & Technology

Review of convection heat transfer and fluid flow in porous media with nanofluid

Raed Abed Mandi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Physics, Condensed Matter

Model for thermal conductivity of carbon nanotube-based composites

QZ Xue

PHYSICA B-CONDENSED MATTER (2005)

Article Thermodynamics

Conceptions for heat transfer correlation of nanofluids

YM Xuan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)