☆ 4.6 Article

DEM-DDM Investigation of the Tablet Coating Process Using Different Particle Shape Models

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

DEM investigation of the conveyor belt sorting system for coated fuel particles with a large feeding rate

Zihan Liu et al.

Summary: In this study, a conveyor belt sorting system is used to separate coated fuel particles. The effects of different parameters on the system are investigated using the Discrete Element Method, and a set of optimal parameters is proposed for the design and optimization of the system.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

Quantifying the coating yield by modeling heat and mass transfer in a Wurster fluidized bed coater

S. Madlmeir et al.

Summary: This study investigates the drying and losses of spray droplets during the coating process of medicines. By using simulation and experiments, the researchers propose solutions to reduce coating losses and improve coating yield, leading to significant time savings.

CHEMICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Ascertain a minimum coating thickness for acid protection of enteric coatings by means of optical coherence tomography

Matthias Wolfgang et al.

Summary: This study investigates the use of optical coherence tomography (OCT) for characterizing the coating thickness and variability of enteric-coated tablets. The results show that the proposed approach can be transferred to in-line monitoring of tablet coating processes, which could improve production efficiency.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Review Chemistry, Medicinal

Emerging Landscape of Computational Modeling in Pharmaceutical Development

Yuriy A. Abramov et al.

Summary: Computational chemistry applications have become essential in the drug discovery workflow, but computational modeling in drug development remains relatively unknown. This review provides an overview of computational support in drug preclinical and clinical development, with a focus on modern physics-based virtual screening methods for solid form design.

JOURNAL OF CHEMICAL INFORMATION AND MODELING (2022)

添加到收藏夹

Article Engineering, Chemical

Development and verification of coarse-grain CFD-DEM for nonspherical particles in a gas-solid fluidized bed

Lianyong Zhou et al.

Summary: This study proposes a coarse-grain CFD-DEM model for nonspherical particles, with the morphology of particles characterized by the super-ellipsoid model. The effectiveness and accuracy of the model are evaluated by comparing hydrodynamic behaviors with traditional CFD-DEM. The results show that the proposed model accurately models gas-solid flow with nonspherical particles and reduces computational costs.

AICHE JOURNAL (2022)

添加到收藏夹

Article Engineering, Chemical

Flow characteristics of nonspherical granular materials simulated with multi-superquadric elements

Siqiang Wang et al.

Summary: The study developed a multi-superquadric model to construct concave and convex particle shapes, and verified its applicability through four tests. Results indicate that concave particles have lower packing density, flow rate, and mixing rate, as well as higher angles of repose.

PARTICUOLOGY (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Interrelationships Between Coating Uniformity and Efficiency in Pan Coating Processes

Michael Choi et al.

Summary: The relationship between coating uniformity and efficiency in tablet coating processes using pan coaters was explored, with factors such as tablet shape and size, bed porosity, coating time, etc., affecting both aspects. Some variables showed a dual impact on coating efficiency and uniformity, highlighting the complexity of the optimization process in formulation, process, and equipment design.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Novel Coating Uniformity Models for Tablet Pan Coaters

Michael Choi et al.

Summary: The novel mathematical models developed are able to accurately predict tablet coating uniformity in cylindrical tablet pan coaters. These models can be used for process analysis, optimization, scale-up, and manufacturing design and control.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Validating a Numerical Simulation of the ConsiGma(R) Coater

Peter Boehling et al.

Summary: Continuous manufacturing is increasingly adopted in the pharmaceutical industry for better product quality and production flexibility. GEA's development of a semi-continuous tablet coater accelerates the transition from traditional batch to continuous production. Process understanding and computational tools are essential for process control and performance improvement in new processes like continuous tablet coating.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Engineering, Chemical

Numerical and experimental validation of a detailed non-isothermal CFD-DEM model of a pilot-scale Wurster coater

Martina Trogrlic et al.

Summary: While the Wurster technology is commonly used in the pharmaceutical industry for coating beads, further research is needed to fully understand and control the process. The CFD-DEM coupled approach is effective in simulating the coating process and has been verified through experimental comparisons. The study also presents time-averaged contour plots of temperature, humidity, and particle volume fraction distribution in the Wurster coater.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Mechanism of inter-tablet coating variability: Investigation about the motion behavior of ellipsoidal tablets in a pan coater

Changhua Xie et al.

Summary: This paper investigates the coating process of tablets using the DEM and DDM methods, analyzing the influence of droplet diameter on computational efficiency and coating uniformity. The study also examines how tablet motion affects coating uniformity and how improving the internal structure can enhance uniformity.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Predictive Approach to Understand and Eliminate Tablet Breakage During Film Coating

William R. Ketterhagen et al.

Summary: A hybrid predictive approach combining DEM modeling and lab-based experiments was developed to identify conditions leading to tablet breakage, with potential modifications to the equipment and process conditions examined in silico. The approach enhances process understanding, identifies optimal conditions within development constraints, and reduces manufacturing risks for future tablet coating batches.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Feasibility of In-line monitoring of critical coating quality attributes via OCT: Thickness, variability, film homogeneity and roughness

Stephan Sacher et al.

Summary: The feasibility of utilizing Optical Coherence Tomography (OCT) for in-line monitoring of pharmaceutical film coating processes has been demonstrated. OCT enables real-time acquisition of high-resolution cross-sectional images, computation of coating thickness, and assessment of coating quality attributes. The study found that OCT can be used to determine end-point, establish in-process control, and support process optimization and formulation development for a wide range of coating formulations.

INTERNATIONAL JOURNAL OF PHARMACEUTICS-X (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Modeling the coating layer thickness in a pharmaceutical coating process

S. Madlmeir et al.

Summary: In this study, detailed CFD-DEM simulations were used to evaluate input parameters for a novel Monte-Carlo simulation approach in predicting coating mass and thickness distributions over the entire process time for pharmaceutical microspheres. The research found that smaller beads receive thicker coating layers and that the spray rate significantly impacts inter-particle coating variability. A stochastic model was developed to investigate the contribution of coating layer and fill weight variability to product non-uniformity in a capsule filling process of Multiple Unit Pellet Systems (MUPS).

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Chemical

DEM Simulation on Mixing Characteristics and Macroscopic/ Microscopic Flow Behaviors of Different-Shaped Sphero-Cylinders in a Rotating Drum

Meng Li et al.

Summary: In this study, the mixing process and flow behavior of different-shaped sphero-cylinders in a rotating drum were numerically investigated. It was found that sphero-cylinders of different aspect ratios can reach well-mixed states under sufficient rotation conditions, with the flow behavior influenced by rotation speed and AR.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

添加到收藏夹

Article Engineering, Chemical

Comparative study of discrete element modeling of tablets using multi-spheres, multi-super-ellipsoids, and polyhedrons

Zihan Liu et al.

Summary: The Discrete Element Method (DEM) is an effective tool for studying non-spherical granular systems encountered in various fields. This paper compares the modeling of tablets using different approaches and validates their accuracy through experiments and simulations. The results show that different modeling approaches have an impact on the simulation outcomes.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Prediction of particle size and layer-thickness distributions in a continuous horizontal fluidized-bed coating process

P. Bachmann et al.

PARTICUOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Multi-super-ellipsoid model for non-spherical particles in DEM simulation

Zihan Liu et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Modeling of inter- and intra-particle coating uniformity in a Wurster fluidized bed by a coupled CFD-DEM-Monte Carlo approach

Zhaochen Jiang et al.

CHEMICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Engineering, Chemical

A DEM-based mechanistic model for scale-up of industrial tablet coating processes

Liang Li et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Discrete element modeling and simulation of non-spherical particles using polyhedrons and super-ellipsoids

Changhua Xie et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

A Discrete Element Method Study of Monodisperse Mixing of Ellipsoidal Particles in a Rotating Drum

Siyuan He et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Chemistry, Medicinal

CFD-DEM -DDM Model for Spray Coating Process in a Wurster Coater

Foad Farivar et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

A Thermodynamic Balance Model for Liquid Film Drying Kinetics of a Tablet Film Coating and Drying Process

Bumjoon Cha et al.

AAPS PHARMSCITECH (2019)

添加到收藏夹

Article Engineering, Chemical

Industrial scale simulations of tablet coating using GPU based DEM: A validation study

Hermann Kureck et al.

CHEMICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Engineering, Chemical

Discrete element simulation of cylindrical particles using super-ellipsoids

Yongzhi Zhao et al.

PARTICUOLOGY (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

How to measure coating thickness of tablets: Method comparison of optical coherence tomography, near-infrared spectroscopy and weight-, height- and diameter gain

P. R. Wahl et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)

添加到收藏夹

Article Engineering, Chemical

Investigating the fluidization of disk-like particles in a fluidized bed using CFD-DEM simulation

Huaqing Ma et al.

ADVANCED POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Mathematics, Applied

A study of shape non-uniformity and poly-dispersity in hopper discharge of spherical and polyhedral particle systems using the Blaze-DEM GPU code

Nicolin Govender et al.

APPLIED MATHEMATICS AND COMPUTATION (2018)

添加到收藏夹

Article Engineering, Chemical

A quantitative comparison of in-line coating thickness distributions obtained from a pharmaceutical tablet mixing process using discrete element method and terahertz pulsed imaging

Chunlei Pei et al.

CHEMICAL ENGINEERING SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigating the flow of rod-like particles in a horizontal rotating drum using DEM simulation

Huaqing Ma et al.

GRANULAR MATTER (2018)

添加到收藏夹

Article Engineering, Chemical

Calibration and interpretation of DEM parameters for simulations of cylindrical tablets with multi-sphere approach

Ramon Cabiscol et al.

POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigating the flow of rod-like particles in a horizontal rotating drum using DEM simulation

Huaqing Ma et al.

GRANULAR MATTER (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Comparison of video analysis and simulations of a drum coating process

P. Boehling et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2017)

添加到收藏夹

Article Chemistry, Medicinal

Measurement of the Intertablet Coating Uniformity of a Pharmaceutical Pan Coating Process With Combined Terahertz and Optical Coherence Tomography In-Line Sensing

Hungyen Lin et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2017)

添加到收藏夹

Article Engineering, Chemical

Asymptotic limits on tablet coating variability based on cap-to-band thickness distributions: A discrete element model (DEM) study

Chunlei Pei et al.

CHEMICAL ENGINEERING SCIENCE (2017)

添加到收藏夹

Article Engineering, Chemical

Scaling Inter-Tablet Coating Variability in a Horizontal Rotating Drum

J. Ban et al.

AICHE JOURNAL (2017)

添加到收藏夹

Article Engineering, Chemical

Inter-particle coating variability in a rotary batch seed coater

Mehrdad Pasha et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)

添加到收藏夹

Article Engineering, Chemical

Monte Carlo Modeling of Fluidized Bed Coating and Layering Processes

Christian Rieck et al.

AICHE JOURNAL (2016)

添加到收藏夹

Article Pharmacology & Pharmacy

Simulation of a tablet coating process at different scales using DEM

P. Boehling et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)

添加到收藏夹

Article Pharmacology & Pharmacy

Analysis of large-scale tablet coating: Modeling, simulation and experiments

P. Boehling et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)

添加到收藏夹

Article Engineering, Chemical

Comparative analysis of the coating thickness on single particles using X-ray micro-computed tomography and confocal laser-scanning microscopy

F. Sondej et al.

POWDER TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Chemical

DEM-compartment-population balance model for particle coating in a horizontal rotating drum

Rahul Kumar et al.

CHEMICAL ENGINEERING SCIENCE (2015)

添加到收藏夹

Article Engineering, Chemical

Comparisons of intra-tablet coating variability using DEM simulations, asymptotic limit models, and experiments

Ben Freireich et al.

CHEMICAL ENGINEERING SCIENCE (2015)

添加到收藏夹

Review Chemistry, Medicinal

Scale Up of Pan Coating Process Using Quality by Design Principles

Anjali M. Agrawal et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2015)

添加到收藏夹

Article Chemistry, Medicinal

Modeling of an Active Tablet Coating Process

Gregor Toschkoff et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2015)

添加到收藏夹

Article Engineering, Chemical

Investigation of coating layer morphology by micro-computed X-ray tomography

Franziska Sondej et al.

POWDER TECHNOLOGY (2015)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Discrete element modeling of rock materials with dilated polyhedral elements

Shunying Ji et al.

NEW PARADIGM OF PARTICLE SCIENCE AND TECHNOLOGY, PROCEEDINGS OF THE 7TH WORLD CONGRESS ON PARTICLE TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Chemical

Particle Mixing Study in Rotating Wavy Wall Tumblers by Discrete Element Method Simulation

Nan Gui et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

添加到收藏夹

Review Pharmacology & Pharmacy

Mathematical modeling of the coating process

Gregor Toschkoff et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Energy-conserving contact interaction models for arbitrarily shaped discrete elements

Y. T. Feng et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)

添加到收藏夹

Article Engineering, Chemical

Intra-tablet coating variability for several pharmaceutical tablet shapes

Ben Freireich et al.

CHEMICAL ENGINEERING SCIENCE (2011)

添加到收藏夹

Article Engineering, Chemical

Dynamic Simulation of the Packing of Ellipsoidal Particles

Zong-Yan Zhou et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)

添加到收藏夹

Article Pharmacology & Pharmacy

Modeling the motion and orientation of various pharmaceutical tablet shapes in a film coating pan using DEM

William R. Ketterhagen

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)

添加到收藏夹

Article Engineering, Chemical

Study of tablet-coating parameters for a pan coater through video imaging and Monte Carlo simulation

Bhoja Kandela et al.

POWDER TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Chemical

A study on the validity of the multi-sphere Discrete Element Method

H. Kruggel-Emden et al.

POWDER TECHNOLOGY (2008)

添加到收藏夹

Article Engineering, Chemical

Challenges in the modeling and prediction of coating of pharmaceutical dosage forms

Richard Turton

POWDER TECHNOLOGY (2008)

添加到收藏夹

Article Engineering, Chemical

Discrete element modelling of fluidised bed spray granulation

MJV Goldschmidt et al.

POWDER TECHNOLOGY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.