☆ 4.7 Article

Preparing high-strength and low-density proppants with oil-based drilling cuttings pyrolysis residues and red mud: Process optimization and sintering mechanism

FUEL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Geochemistry & Geophysics

Effective Stress Factor Analysis of Proppant for Multi-stage Fracturing in Horizontal Wells

Bo Cai et al.

Summary: This study analyzes the effective stress characteristics of proppants during multi-stage hydraulic fracturing in horizontal wells and considers the geomechanics and long-term production characteristics of reservoirs. The results show that the stress on proppants is influenced by geological factors as well as injection volume, spacing, fluid type, displacement, and post-fracture management. Increasing injection intensity, reducing fracture spacing, using low-viscosity fracturing fluid, and implementing a reasonable flowback system can enhance the effective conductivity of proppants. Furthermore, the analysis of nearly 300 horizontal wells reveals that the effective stress of proppants in horizontal wells is only 50-60% of that in vertical wells, indicating a different proppant selection criterion and the potential to replace ceramsite proppant with quartz sand to reduce costs and increase efficiency.

GEOFLUIDS (2022)

添加到收藏夹

Article Energy & Fuels

Coated proppants with self-suspension and tracer slow-release functions

Yang Zhou et al.

Summary: Proppants play a vital role in increasing oil and gas output in shale oil and gas development. Tracers are utilized to assess reservoir heterogeneity and dynamic equivalence. Development of functional coated proppants with tracer slow-release function is challenging but significant. The study introduced carbon quantum dots into polyvinyl alcohol coated proppants to fabricate self-suspension proppants with tracer slow-release function, showing promising results for improving oil and gas production.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Environmental Sciences

Particular pollutants, physical properties, and environmental performance of porous ceramsite materials containing oil-based drilling cuttings residues

Deming Xiong et al.

Summary: The study found that ceramsite made from ODCRs can improve the processing speed of ODCRs and be used as building materials, greening materials, and industrial filter materials, among other applications, increasing its environmental and social benefits.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

添加到收藏夹

Article Engineering, Environmental

Utilization of Cr-Contaminated Oil-Based Drilling-Cuttings Ash in Preparation of Bauxite-Based Proppants

Pin Xie et al.

Summary: The study showed that OBDCA-sp/bauxite proppants had excellent performance at low mixture ratios, but increasing the ratio led to surface collapse of the proppants. X-ray diffraction results revealed a decrease in bauxite phase structure as the mixture ratio of OBDCA-sp to bauxite increased.

ENVIRONMENTAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Energy & Fuels

Ultra-light weight proppant: Synthesis, characterization, and performance of new proppants

Joana E. Tasque et al.

Summary: The study compared the performance of polymer proppants synthesized with different fillers, and found that the composites prepared in presence of carbon black showed the most promising results, meeting the requirements for hydraulic fracturing with good conductivity and permeability similar to commercial polymeric and natural sand, as well as no generation of fines observed in the crushing test.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Environmental Sciences

Using water-based drilling cuttings from shale gas development to manufacture sintered bricks: a case study in the southern Sichuan Basin, China

Wenshi Liu et al.

Summary: This study evaluated the feasibility of using water-based drilling cuttings (WDC) to prepare sintered bricks and found that incorporating waste glass and fly ash could improve the physical-mechanical performance. Under optimal preparation conditions, the WDC sintered bricks met the requirements of Chinese and ASTM standards, providing an effective solution for recycling WDC from shale gas development.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

添加到收藏夹

Article Environmental Sciences

Integration of a shoreline response program (SRP) and shoreline assessment surveys into an Incident Management System for oil spill response

Edward Owens et al.

Summary: The Shoreline Response Program (SRP) is an adjustment within an Incident Management System (IMS) aimed at improving planning, preparedness, and initial response practices for oil spills. By integrating SRP into IMS, decision and planning processes can be streamlined, costs reduced, and impacts on shorelines minimized.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

添加到收藏夹

Article Materials Science, Ceramics

Preparation of high-strength ceramsite from red mud, fly ash, and bentonite

Hongcheng Mi et al.

Summary: High-strength ceramsite was successfully prepared without any chemical additives through a two-stage sintering process using red mud, fly ash, and bentonite. The optimal synthesis conditions resulted in ceramsite with high compressive strength, low water absorption, and effective solidification of deleterious elements.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effects of sintering temperature on microstructure and properties of low-grade bauxite-based ceramic proppant

Donghai Ding et al.

Summary: In this study, low density and high strength ceramic proppant was prepared by sintering high aluminium type low-grade bauxite and high iron type low-grade bauxite within a specific temperature range. Through XRD and SEM analysis, it was found that the mullite crystal conforms to the layer growth theory, showing step growth mechanism and forming needle-like morphology at higher sintering temperatures.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Environmental

Low-temperature thermal desorption and secure landfill for oil-based drill cuttings management: Pollution control, human health risk, and probabilistic cost assessment

Guangji Hu et al.

Summary: The study found that LTTD treatment can effectively reduce the risk of PAHs in OBDCs, but the impact on heavy metals is not significant. Significant cancer risks were identified for exposure to toxic heavy metals, while the risks posed by PAHs were not significant in both securely landfilled and LTTD-treated OBDCs.

JOURNAL OF HAZARDOUS MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultra-high heating rate effects on the sintering of ceramic nanoparticles: an in situ TEM study

Xin Li Phuah et al.

Summary: This study demonstrates the use of in situ transmission electron microscopy (TEM) heating to observe ceramic nanoparticles in real-time under ultra-high heating rates up to 1200 degrees C/s. It was found that ultra-high heating rate is highly effective in densifying 3 mol.% yttria-stabilized zirconia nanoparticles, while less effective for 8 mol.% yttria-stabilized zirconia or zinc oxide due to competing diffusion mechanisms.

MATERIALS RESEARCH LETTERS (2021)

添加到收藏夹

Article Construction & Building Technology

Preparation, characteristics and mechanisms of the composite sintered bricks produced from shale, sewage sludge, coal gangue powder and iron ore tailings

Liqun Luo et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effects of CaCO3 additive on properties and microstructure of corundum- And mullite-based ceramic proppants

Mei Qin et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Environmental

Physicochemical characteristics of oil-based cuttings from pretreatment in shale gas well sites

Guobin Jiang et al.

JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Environmental

A novel approach to preparing ultra-lightweight ceramsite with a large amount of fly ash

Sen Liu et al.

FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and color properties of the CoAl2O4/Al2O3hybrid blue pigments with low cobalt contents

Xuanmeng He et al.

JOURNAL OF MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effects of sintering temperature on microstructure, properties, and crushing behavior of ceramic proppants

Haiqiang Ma et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and characterization of high silicon ceramic proppants using low grade bauxite and fly ash

Qiang Ren et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of thermochemical activation of clay raw materials on phase formation, microstructure and properties of aluminosilicate proppants

T. V. Vakalova et al.

APPLIED CLAY SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Preparation and properties of resin coated ceramic proppants with ultra light weight and high strength from coal-series kaolin

Xiaokang Xie et al.

APPLIED CLAY SCIENCE (2019)

添加到收藏夹

Article Materials Science, Ceramics

Low-temperature sintering of ceramic proppants by adding solid wastes

Jianying Hao et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of raw material milling on ceramic proppants properties

Anabella Mocciaro et al.

APPLIED CLAY SCIENCE (2018)

添加到收藏夹

Article Materials Science, Ceramics

Assessment of crystalline phase changes and glass formation by RietveldXRD method on ceramic lightweight aggregates sintered from mineral and polymeric wastes

Jose Manuel Moreno-Maroto et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis and microstructural evolution in iron oxide kaolinite based proppant as a function of reducing atmosphere, sintering conditions, and composition

Kyu-Bum Han et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Environmental Sciences

A study on the oil-based drilling cutting pyrolysis residue resource utilization by the exploration and development of shale gas

Chao-qiang Wang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)

添加到收藏夹

Article Chemistry, Physical

Preparation and characterization of ceramic proppants with low density and high strength using fly ash

Xiulan Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Optimization of Maerua Decumbent bio-coagulant in paint industry wastewater treatment with response surface methodology

Beatrice Kakoi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Engineering, Environmental

Environmental performance, mechanical and microstructure analysis of concrete containing oil-based drilling cuttings pyrolysis residues of shale gas

Chao-qiang Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Ceramic Proppants Based on Kazakhstan Natural Alumosilicate Resources

A. A. Biryukova et al.

REFRACTORIES AND INDUSTRIAL CERAMICS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of MnO2 on the Properties of Mullite-based Ceramics

Xudong Chen et al.

CHEMISTRY LETTERS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Low-cost and environment-friendly ceramic foams made from lead-zinc mine tailings and red mud: Foaming mechanism, physical, mechanical and chemical properties

Taoyong Liu et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sintering temperature dependence of low-cost, low-density ceramic proppant with high breakage resistance

Xiaoxia Ma et al.

MATERIALS LETTERS (2016)

添加到收藏夹

Article Engineering, Chemical

Synthesis and properties of new materials produced by alkaline activation of glass cullet and red mud

Alina Ioana Badanoiu et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2015)

添加到收藏夹

Article Materials Science, Ceramics

Novel glass ceramic foams materials based on red mud

Yuxi Guo et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Composites

Mechanics of light weight proppants: A discrete approach

M. C. Kulkarni et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Review Engineering, Environmental

A review of the current options for the treatment and safe disposal of drill cuttings

Andrew S. Ball et al.

WASTE MANAGEMENT & RESEARCH (2012)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Bauxite residue issues: II. options for residue utilization

C. Klauber et al.

HYDROMETALLURGY (2011)

添加到收藏夹

Article Materials Science, Ceramics

The influence of different CaO source in the production of anorthite ceramics

S. Kurama et al.

CERAMICS INTERNATIONAL (2009)

添加到收藏夹

Article Engineering, Environmental

Characterization of red mud derived from a combined Bayer Process and bauxite calcination method

Yong Liu et al.

JOURNAL OF HAZARDOUS MATERIALS (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of compaction on the kinetics of thermal decomposition of dolomite under non-isothermal condition

S Maitra et al.

JOURNAL OF MATERIALS SCIENCE (2005)

添加到收藏夹

Article Chemistry, Physical

The role of charcoal on DTA curves of organo-clay complexes: an overview

S Yariv

APPLIED CLAY SCIENCE (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation by pyrolysis of aerosols and structural characterization of Fe-doped mullite powders

M Ocaña et al.

MATERIALS RESEARCH BULLETIN (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.