相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Experimental investigation on combustion and particulate emissions of the high compressed natural gas reactivity controlled compression ignition over wide ranges of intake conditions in a multi-cylinder engine using a two-stage intake boost system
Sunyoup Lee et al.
FUEL PROCESSING TECHNOLOGY (2022)
Effect of ethanol blends, E10, E25 and E85 on sub-23 nm particle emissions and their volatile fraction at exhaust of a high-performance GDI engine over the WLTC
Francesco Catapano et al.
FUEL (2022)
Effect of ethanol blends, E10, E25 and E85 on sub-23 nm particle emissions and their volatile fraction at exhaust of a high-performance GDI engine over the WLTC
Francesco Catapano et al.
FUEL (2022)
Gasoline-diesel dual fuel intelligent charge compression ignition (ICCI) combustion: Conceptual model and comparison with other advanced combustion modes
ZiLong Li et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2021)
Effect of pilot fuel properties on lean dual-fuel combustion and emission characteristics in a heavy-duty engine
Zeeshan Ahmad et al.
APPLIED ENERGY (2021)
Experimental study on the application of bioethanol in dual-fuel intelligent charge compression ignition (ICCI) engine
Yaoyuan Zhang et al.
FUEL (2021)
Heat release rate shaping for optimal gross indicated efficiency in a heavy-duty RCCI engine fueled with E85 and diesel
Robbert Willems et al.
FUEL (2021)
Influence of Low Ambient Temperatures on the Exhaust Gas and Deposit Composition of Gasoline Engines
Dominik Appel et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)
Experimental investigation of strategies to enhance the homogeneous charge compression ignition engine characteristics powered by waste plastic oil
M. Parthasarathy et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
A methodology for stratified-charge preparation via low-reactivity fuel multi-injection strategy in intelligent charge compression ignition (ICCI) mode
Zilong Li et al.
FUEL (2021)
Effects of injection timing and EGR on combustion and emissions characteristics of the diesel engine fuelled with acetone-butanol-ethanol/diesel blend fuels
Xiongbo Duan et al.
ENERGY (2021)
Meeting EURO6 emission regulations by multi-objective optimization of the injection strategy of two direct injectors in a DDFS engine
Sasan Shirvani et al.
ENERGY (2021)
Experimental investigation of direct injection dual fuel of n-butanol and biodiesel on Intelligent Charge Compression Ignition (ICCI) Combustion mode
Wenbin Zhao et al.
APPLIED ENERGY (2020)
Comparison of Artificial Neural Network and Fuzzy Logic Approaches for the Prediction of In-Cylinder Pressure in a Spark Ignition Engine
Ozgur Solmaz et al.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2020)
Investigation of Dual-Fuel Combustion by Different Port Injection Fuels (Neat Ethanol and E85) in a DE95 Diesel/Ethanol Blend Fueled Compression Ignition Engine
Habib Gurbuz et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2020)
Study on influencing factors of particle emissions from a RCCI engine with variation of premixing ratio and total cycle energy
Weiqiang Han et al.
ENERGY (2020)
Control of intake boundary conditions for enabling clean combustion in variable engine conditions under intelligent charge compression ignition (ICCI) mode
Zilong Li et al.
APPLIED ENERGY (2020)
Combined influence of supercharging, EGR, biodiesel and ethanol on emissions of a diesel engine: Proposal of an optimization strategy
Vezir Ayhan et al.
ENERGY (2020)
Effect of operating parameters on performance and emissions of a diesel engine fueled with ternary blends of palm oil biodiesel/diethyl ether/diesel by Taguchi method
Samet Uslu et al.
FUEL (2020)
A study of using E10 and E85 under direct dual fuel stratification (DDFS) strategy: Exploring the effects of the reactivity-stratification and diffusion-limited injection on emissions and performance in an E10/diesel DDFS engine
Saeid Shirvani et al.
FUEL (2020)
Optimization of diesel engine operating parameters fueled with palm oil-diesel blend: Comparative evaluation between response surface methodology (RSM) and artificial neural network (ANN)
Samet Uslu
FUEL (2020)
Effect of hydrogen and multiwall carbon nanotubes blends on combustion performance and emission of diesel engine using Taguchi approach
S. Manigandan et al.
FUEL (2020)
Evaluation of comparative engine combustion, performance and emission characteristics of low temperature combustion (PCCI and RCCI) modes
Akhilendra Pratap Singh et al.
APPLIED ENERGY (2020)
Dual fuel intelligent charge compression ignition (ICCI) combustion: Efficient and clean combustion technology for compression ignition engines
Zilong Li et al.
FUEL (2020)
Development of an artificial neural network based virtual sensing platform for the simultaneous prediction of emission-performance-stability parameters of a diesel engine operating in dual fuel mode with port injected methanol
Dipankar Kakati et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Developing a model to predict the start of combustion in HCCI engine using ANN-GA approach
M. Taghavi et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Technology Development Analysis on Low Carbon for Power of Heavy-Duty Commercial Vehicle
Jiangwei Liu et al.
AUTOMOTIVE INNOVATION (2019)
Experimental study on combustion and emissions of dual fuel RCCI mode fueled with biodiesel/n-butanol, biodiesel/2,5-dimethylfuran and biodiesel/ethanol
Zunqing Zheng et al.
ENERGY (2018)
Benefits of E85 versus gasoline as low reactivity fuel for an automotive diesel engine operating in reactivity controlled compression ignition combustion mode
Jesus Benajes et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Combustion, performance and particulate matter emissions analysis of operating parameters on a GDI engine by traditional experimental investigation and Taguchi method
Miaomiao Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Experimental investigation into the combustion characteristics of a methanol-Diesel heavy duty engine operated in RCCI mode
Zhiqin Jia et al.
FUEL (2018)
Principle of determining the optimal operating parameters based on fuel properties and initial conditions for RCCI engines
Yaopeng Li et al.
FUEL (2018)
Performance and emission analysis of a diesel engine implementing polanga biodiesel and optimization using Taguchi method
Naushad Ahamad Ansari et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Study on ignition and flame development in gasoline partially premixed combustion using multiple optical diagnostics
Qinglong Tang et al.
COMBUSTION AND FLAME (2017)
Multi-objective optimization of ethanol fuelled HCCI engine performance using hybrid GRNN-PSO
Harisankar Bendu et al.
APPLIED ENERGY (2017)
An investigation into the RCCI engine operation under low load and its achievable operational range at different engine speeds
Yifeng Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Experimental investigation of performance, exhaust emission and combustion parameters of stationary compression ignition engine using ethanol fumigation in dual fuel mode
D. K. Jamuwa et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Application of CFD-chemical kinetics approach in detecting RCCI engine knocking fuelled with biodiesel/methanol
D. Z. Zhou et al.
APPLIED ENERGY (2015)
Study of the control strategies on soot reduction under early-injection conditions on a diesel engine
Haifeng Liu et al.
FUEL (2015)
Multi objective optimization of performance parameters of a single cylinder diesel engine running with hydrogen using a Taguchi-fuzzy based approach
Probir Kumar Bose et al.
ENERGY (2013)
分享论文
