4.7 Article

Study on injection strategy of ammonia/hydrogen dual fuel engine under different compression ratios

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Performance characteristics of a two-stroke low speed engine applying ammonia/diesel dual direct injection strategy

Zhenxian Zhang et al.

Summary: In this study, the Ammonia/Diesel dual direct injection mode of a two-stroke low speed engine was evaluated. It was found that the injection timing of diesel can regulate the engine combustion phase, improving the combustion efficiency and indicated thermal efficiency of ammonia. Furthermore, by optimizing the injection timings of diesel and ammonia, the fuel type NOx emission produced by ammonia combustion can be reduced.
Article Energy & Fuels

Effect of Diesel-Ignited Ammonia/Hydrogen mixture fuel combustion on engine combustion and emission performance

Binbin Wang et al.

Summary: This study investigates the effect of varying ammonia blending hydrogen ratio on the combustion performance of a diesel engine. The results show that a 30% hydrogen blending ratio leads to increased explosion pressure, improved power, reduced fuel consumption, and decreased ammonia escape and soot emissions.
Article Thermodynamics

Effect of parallel LPG fuelling in a methanol fuelled SI engine under variable compression ratio

M. H. Dinesh et al.

Summary: The experimental study showed that using methanol/LPG dual fuel can significantly improve the performance of an SI engine, with increased brake power, brake thermal efficiency, and volumetric efficiency. The flame development period decreases, while the flame propagation period and total combustion duration depend on the compression ratio and LPG fraction.

ENERGY (2022)

Article Chemistry, Physical

End-gas autoignition and knocking combustion of ammonia/hydrogen/air mixtures in a confined reactor

Zhou Yu et al.

Summary: End-gas autoignition and detonation development in ammonia/hydrogen/air mixtures in a confined reactor is studied through detailed numerical simulations. The addition of hydrogen significantly promotes autoignition, even in small amounts. NH2 and H2NO are identified as the most important nitrogen-containing species in low hydrogen mole ratio mixtures, while R49 (NH2- +NO<=>N-2+H2O) is a crucial reaction during thermal runaway. Three different end-gas autoignition and combustion modes are observed, and the knocking intensity is not only affected by initial temperature and hydrogen content, but also by the reactivity of the end-gas.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Numerical analysis of performance and emissions behavior of a bi-fuel engine with compressed natural gas enriched with hydrogen using variable compression ratio strategy

Abbas Zarenezhad Ashkezari

Summary: Increasing the compression ratio can reduce fuel consumption and improve performance. The optimal compression ratio is important in engine design, and the VCR strategy can optimize the performance and emissions of bi-fuel engines.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Energy & Fuels

Numerical investigation on the combustion and emission characteristics of ammonia in a low-speed two-stroke marine engine

Long Liu et al.

Summary: This study constructed an ammonia engine model to evaluate its performance and emissions characteristics. The supply method of liquid ammonia showed better results in terms of power, unburned and escaped ammonia, and thermal efficiency. The NOx emissions of the ammonia engine met the Tier II emission limit.
Article Chemistry, Physical

Laminar flame speed correlations of ammonia/hydrogen mixtures at high pressure and temperature for combustion modeling applications

V. Pessina et al.

Summary: This study provides laminar flame speed correlations for ammonia/hydrogen/air mixtures under high pressure and high temperature conditions, and proposes a formula that adapts to the hydrogen content. It is of great importance for the development of suitable numerical tools for ammonia/hydrogen mixtures.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Energy & Fuels

The Mechanism of Particle Formation in Non-Premixed Hydrogen Combustion in a Direct-Injection Internal Combustion Engine

Andy Thawko et al.

Summary: Contrary to previous beliefs, it has been discovered that hydrogen combustion in non-premixed engines may result in higher particle formation. Through a series of studies, the physical reasons behind this discrepancy have been identified, along with the mechanism governing particle formation in hydrogen combustion.
Review Chemistry, Physical

A review of ammonia as a compression ignition engine fuel

Pavlos Dimitriou et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Numerical study of the effect of injection timing on the knock combustion in a direct-injection hydrogen engine

Yixiang Ye et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Thermodynamics

Development of a wide range-operable, rich-lean low-NOx combustor for NH3 fuel gas-turbine power generation

Osamu Kurata et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

Review Chemistry, Physical

Liquid hydrogen, methylcyclohexane, and ammonia as potential hydrogen storage: Comparison review

Agung Tri Wijayanta et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Engineering, Mechanical

Influence of injection strategies on knock resistance and combustion characteristics in a DISI engine

Haiqiao Wei et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2019)

Review Thermodynamics

Ammonia for power

A. Valera-Medina et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)

Article Chemistry, Physical

Novel dual fuel diesel-ammonia combustion system in advanced TDI engines

A. Boretti

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

An onboard hydrogen generator for hydrogen enhanced combustion with internal combustion engine

S. C. Chen et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Engineering, Chemical

THERMO-ENVIRONOMIC EVALUATION OF THE AMMONIA PRODUCTION

Laurence Tock et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2015)

Article Chemistry, Physical

Laminar burning velocity and Markstein length of ammonia/hydrogen/air premixed flames at elevated pressures

Akinori Ichikawa et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Energy & Fuels

Methanation of hydrogen and carbon dioxide

Marko Burkhardt et al.

APPLIED ENERGY (2013)

Editorial Material Geosciences, Multidisciplinary

The boundless carbon cycle

Tom J. Battin et al.

NATURE GEOSCIENCE (2009)

Article Multidisciplinary Sciences

Orbital and millennial-scale features of atmospheric CH4 over the past 800,000 years

Laetitia Loulergue et al.

NATURE (2008)

Article Thermodynamics

Effect of ethanol-gasoline blends on engine performance and exhaust emissions in different compression ratios

Huseyin Serdar Yucesu et al.

APPLIED THERMAL ENGINEERING (2006)

Article Environmental Sciences

Carbon dioxide emissions and climate change: policy implications for the cement industry

R Rehan et al.

ENVIRONMENTAL SCIENCE & POLICY (2005)

Article Engineering, Mechanical

Comparisons of diesel spray liquid penetration and vapor fuel distributions with in-cylinder optical measurements

LM Ricart et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2000)