4.7 Article

Investigation of the effects of intermediate reservoirs and intermediate feedings applications on the performance of proton exchange membrane fuel cells

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Optimal parameter estimation strategy of PEM fuel cell using gradient-based optimizer

Hegazy Rezk et al.

Summary: The article introduces a robust methodology based on the Gradient-based Optimizer (GBO) for identifying the optimal parameters of proton exchange membrane fuel cells (PEMFC), and demonstrates its superiority in determining the optimal parameters of different PEM fuel cells.

ENERGY (2022)

Article Energy & Fuels

Protonated phosphonic acid electrodes for high power heavy-duty vehicle fuel cells

Katie H. Lim et al.

Summary: This study demonstrates that the use of protonating phosphonic acid electrodes greatly improves the performance of high-temperature polymer electrolyte membrane fuel cells, achieving higher power density and better durability. This is of great significance for heavy-duty vehicle applications.

NATURE ENERGY (2022)

Article Energy & Fuels

Fuel cells with an operational range of-20 °C to 200 °C enabled by phosphoric acid-doped intrinsically ultramicroporous membranes

Hongying Tang et al.

Summary: Researchers have developed a new type of fuel cell membrane that can operate over a wider temperature range, from -20 to 200 degrees C. This ultramicroporous membrane retains phosphoric acid even under highly humidified conditions and exhibits higher proton conductivity retention compared to conventional membranes. This innovation could simplify heat and water management in fuel cell systems, potentially reducing costs.

NATURE ENERGY (2022)

Article Thermodynamics

Investigation of liquid water behaviors inside a PEMFC cathode with a leaf-like biomimetic flow field design based on Murray's Law

Duy Khang Dang et al.

Summary: This study investigates liquid water behaviors inside a leaf-like biomimetic flow field design based on Murray's Law at the cathode of a PEMFC. The results include the general water transport process, the velocity, and pressure distribution inside the leaf-like biomimetic flow field design.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2022)

Article Thermodynamics

Effects of moisture dehumidification on the performance and degradation of a proton exchange membrane fuel cell

Biao Xiao et al.

Summary: This study investigates the effect of gas condensation on the performance of a proton exchange membrane fuel cell (PEMFC). The results show that moisture dehumidification has a positive effect on the PEMFC performance, especially under high current density, high relative humidity, and high pressure.

ENERGY (2022)

Article Thermodynamics

Numerical simulation and visualization study of a new tapered-slope serpentine flow field in proton exchange membrane fuel cell

Haozhong Huang et al.

Summary: This study introduced a new tapered-slope serpentine flow field for proton exchange membrane fuel cells and demonstrated its performance advantages through visualization experiments and numerical simulations, including reduced pressure drop, increased power density, good drainage performance, and improved mass transfer.

ENERGY (2022)

Article Energy & Fuels

A comparative analysis of a novel flow field pattern with different channel size configurations

Hanbey Hazar et al.

Summary: This study investigates the impact of flow field design on the performance of PEM fuel cells and finds that the geometric dimensions of the flow channels significantly affect the chemical reactions and electrical characteristics of the cell.
Article Chemistry, Physical

Development of titanium bipolar plates fabricated by additive manufacturing for PEM fuel cells in electric vehicles

Selahattin Celik et al.

Summary: Bipolar plates are critical components of PEM fuel cell stacks. Machining flow channels on graphite bipolar plates is challenging, so additive manufacturing methods for other materials are considered as alternatives. This study compares the performance of different bipolar plates and presents a high specific power density titanium design.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Review Chemistry, Physical

Review on water management methods for proton exchange membrane fuel cells

X. R. Wang et al.

Summary: Managing water content in PEMFCs is crucial, as both excess or lack of water can impact performance and lifespan. Monitoring water flow and accumulation is an effective way to determine the situation.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Thermodynamics

Geometry optimization of a novel M-like flow field in a proton exchange membrane fuel cell

Chen Yang et al.

Summary: Numerical simulations showed that the M-like channel performs better in terms of uniform oxygen distribution and higher reactant participation in proton exchange membrane fuel cells compared to the conventional parallel channel. Utilization of an effective evaluation criterion further confirmed that the M-like channel has better overall performance, particularly in mass transfer efficiency, without the drawback of high pressure drop.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Chemistry, Physical

Study of new flow field geometries to enhance water redistribution and pressure head losses reduction within PEM fuel cell

Kush Chadha et al.

Summary: In this study, two new designs for stainless steel bipolar plates are proposed to improve reactant distribution and pressure drop in fuel cells. The multi-serpentine design shows the best electrical performance, while the hybrid design has the lowest pressure head losses and higher stability over time.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Thermodynamics

The effects of different flow field patterns on polymer electrolyte membrane fuel cell performance

Hanbey Hazar et al.

Summary: This study designed five flow fields as alternatives to the serpentine flow field, with Parallel M-type showing the highest power density and Stair type demonstrating the lowest power density.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

A new water management system for air-breathing direct methanol fuel cell using superhydrophilic capillary network and evaporation wings

Shijie Su et al.

Summary: A new water management system consisting of a superhydrophilic capillary network and evaporation wings is proposed to address the issue of oxygen starvation caused by water flooding in air-breathing DMFCs. Results show that the WMCFF-DMFC has significantly higher initial peak power density and lower decline rate compared to the conventional CCFF-DMFC, demonstrating improved performance and stability.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

Investigation of metal foam porosity and wettability on fuel cell water management by Electrochemical Impedance Spectroscopy

Xiaoyan Sun et al.

Summary: Metal foam has been proven to have high gas uniformity and water storage ability, making it a potential alternative to conventional flow fields in proton-exchange membrane fuel cells. Experimental comparisons showed that metal foam cells achieved over 80% higher power density than serpentine flow fields with one third pressure drop. Selecting the porosity of metal foam depends on the inlet relative humidity to reduce polarization loss and maximize cell performance.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2021)

Article Chemistry, Physical

Application of porous materials for the flow field in polymer electrolyte membrane fuel cells

Yinghui Zhang et al.

Summary: Porous metals and carbonaceous materials are gaining attention for applications in polymer electrolyte membrane fuel cells as porous flow fields/distributors, offering high electrical conductivity, porosity, controllable structure, and lightweight. The porous flow distributor has been shown to distribute reactant gases more evenly and improve electrochemical performance compared to conventional ribbed flow distributors, with analyses on the impact of structural/surfacial properties and operating conditions on fuel cell performance. Challenges in performance stability of porous metal flow distributors in corrosive environments and recent advances in corrosion-resistant porous flow distributors are also discussed.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Fractional order model for diagnosis of flooding and drying of the proton exchange membrane fuel cell

Slimane Laribi et al.

Summary: This study investigates the characterization and diagnosis of fuel cells using a fractional order impedance model and factor design methodology, demonstrating the sensitivity of physical parameters to humidity for monitoring and diagnosing fuel cells. The proposed model is robust and reliable for integrating into PEMFCs water management system.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Effect of humidification on distribution and uniformity of reactants and water content in PEMFC

Zongyi Cheng et al.

Summary: The research found that hydrogen humidification has a significant impact on reactant distribution and membrane water content, but it needs to control the relative humidity within a suitable range to maintain uniformity. When the relative humidity of hydrogen is 50%, the distribution of reactants is the most uniform.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Electrochemistry

Effects of Gas Diffusion Layer Substrates on PEFC Water Management: Part I. Operando Liquid Water Saturation and Gas Diffusion Properties

Hong Xu et al.

Summary: Gas diffusion layers (GDLs) play a critical role in water management in polymer electrolyte fuel cells, impacting cell performance. High liquid saturation in GDLs can limit gas transport and reduce cell performance. By using XTM and numerical simulations, the impact of GDL materials on cell performance can be analyzed to provide guidelines for material selection and modification.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Influence of corner structure of fuel cell serpentine channel on water removal

Yan Yin et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Review Thermodynamics

Polymer electrolyte membrane fuel cell flow field designs and approaches for performance enhancement

Erman Celik et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2020)

Article Green & Sustainable Science & Technology

Three-dimensional multiphase model of proton exchange membrane fuel cell with honeycomb flow field at the cathode side

Seyed Ali Atyabi et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Thermodynamics

Optimization design of the cathode flow channel for proton exchange membrane fuel cells

Linhao Fan et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Article Chemistry, Physical

Maintaining desired level of relative humidity throughout a fuel cell with spatially variable heat removal rates

Ivan Tolj et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Neurosciences

Alterations in cerebral blood flow and cerebrovascular reactivity during 14 days at 5050 m

Samuel J. E. Lucas et al.

JOURNAL OF PHYSIOLOGY-LONDON (2011)

Review Physiology

Humans at high altitude: Hypoxia and fetal growth

Lorna G. Moore et al.

RESPIRATORY PHYSIOLOGY & NEUROBIOLOGY (2011)

Review Cardiac & Cardiovascular Systems

Physiological Adaptation of the Cardiovascular System to High Altitude

Robert Naeije

PROGRESS IN CARDIOVASCULAR DISEASES (2010)

Review Chemistry, Physical

Review of bipolar plates in PEM fuel cells: Flow-field designs

XG Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)