Efficient nitrate reduction in water using an integrated photocatalyst adsorbent based on chitosan-titanium dioxide nanocomposite

Globally, there exists a huge concern on the increased discharge of nitrates to the natural water resources out of various anthropogenic activities as it causes serious environmental pollution and associated harmful effects. In the present work, sol-gel-derived functional nanocomposites based on silver (Ag) and nitrogen (N)-doped titanium dioxide (TiO2)-coated chitosan nanocomposites were successfully synthesized in the form of beads, and their application for the reduction of nitrates in water was studied. The synthesized nanocomposite beads were characterized for their structural, textural, and morphological features using X-ray diffraction analysis, Fourier transform infrared spectroscopy, UV-visible spectroscopy, BET surface area analysis, Scanning electron microscopy, Transmission electron microscopy, and X-ray photoelectron spectroscopy. A uniform coating of doped titania species on the chitosan porous structure was achieved through electrostatic interaction. Adsorption/photocatalytic reduction of nitrates was further carried out using functional nanocomposite beads by monitoring the nitrate concentration of the model contaminated water, in an adsorption study under dark condition and photocatalytic study under UV/sunlight for a definite time period. Drying conditions of the nanocomposite beads were found to have a significant effect on the adsorption cum photocatalytic efficiencies of the nanocomposite. The freeze-dried chitosan-titania nanocomposite beads containing 0.5 mol% Ag exhibited an adsorption efficiency of similar to 43.5% (under dark for 30 min) and photocatalytic reduction capability of similar to 95% (under sunlight for 2 h), whereas the oven dried beads of the same composition exhibits adsorption and photocatalytic efficiencies of 40% (under dark for 30 min) and 70% (under UV light for 2 h) respectively, towards the reduction of nitrate ions in an aqueous solution. Continuous flow adsorption cum photocatalytic study using the oven-dried nanocomposite beads was also carried out with the help of an experimental setup fabricated in-house and under varying experimental conditions such as flow rate, bed height, and concentration of feed solution. Nitrate reduction efficiency of 87.6% and an adsorption capacity of 7.9 mg g(-1) were obtained for the nanocomposite beads in the continuous flow adsorption cum photocatalysis experiment for up to 8 h when using an inlet concentration of 100 ppm, bed height 12 cm, and flow rate 5.0 mL min(-1). A representative fixed-bed column adsorption experiment performed with oven dried nanocomposite beads in a real groundwater sample collected from the Palakkad District of Kerala shows promising results for nitrate reduction (85.9% efficiency) along with a significant removal rate for the other anions as well. Thus, the adsorption cum photocatalytic nitrate reduction efficiency of the functional nanocomposite material makes them suitable for the reduction of nitrates from water/wastewater through an integrated nanocomposite approach.

Automated summary

In this study, silver and nitrogen-doped titanium dioxide coated chitosan nanocomposites were successfully synthesized and applied for the reduction of nitrates in water through adsorption and photocatalysis. The drying conditions of the nanocomposite beads were found to significantly affect their adsorption and photocatalytic efficiencies. The nanocomposite beads demonstrated high nitrate reduction efficiency and promising results in both continuous flow adsorption cum photocatalysis experiment and fixed-bed column adsorption experiment, indicating their potential for nitrate reduction from water and wastewater.