Tertiary treatment of bio-treated landfill leachate by a two-step electrochemical process including electrooxidation and electrocoagulation: a bench-scale trial

A two-step electrochemical process including electrooxidation (EO) and electrocoagulation (EC) was proposed for the tertiary treatment of bio-treated landfill leachate (BTLL). The operating conditions of sole EO and EC technology were optimized via batch tests. Batch tests indicate that EO displayed superior removal efficiency towards color (89%) and UV254 (64%) under optimal experimental conditions. EC with the electrode combinations Fe-Fe-Fe-Fe (four plates, anode-cathode-anode-cathode) performed better than the other electrode combinations (Fe-Al-Fe-Al, Al-Fe-Al- Fe, Al-Al-Al-Al) and showed excellent removal efficiency towards COD (60%) and color (85%). In continuous- flow tests of 13 h, compared to sequential EC-EO process, the sequential EO-EC process was more effective than the sequential EC-EO process in reducing organic matters (COD, TOC) and residual chlorine. The sequential EO-EC process could remove 50% COD, 55% TOC, 72% UV254, and 96% color. The average concentration of residual chlorine in the final effluent of EO-EC process (147 mg/L) was significantly lower than that of EC-EO process (463 mg/L). UV-vis and GC-MS analyses indicate that the BTLL mainly contained humic acid and fulvic acid-like substances with unsaturated bonds. Conjugated unsaturated organics could be degraded into organic of small molecular weight after the sequential EO-EC process. EEM spectroscopic analysis revealed that soluble microbial byproducts became the predominant organics in the final effluent. This work verifies the synergism between EO and EC and provides some insights into the removal and degradation performance of organic substances in BTLL during the sequential EO-EC treatment.

Automated summary

This study proposed a two-step electrochemical process, including electrooxidation (EO) and electrocoagulation (EC), for the tertiary treatment of bio-treated landfill leachate (BTLL). The results showed that EO exhibited high removal efficiency for color and UV254, while EC showed better removal performance for COD and color. In continuous-flow tests, the sequential EO-EC process was more effective than the sequential EC-EO process in removing organic matters and residual chlorine. This study verifies the synergism between EO and EC and provides insights into the removal and degradation performance of organic substances in BTLL during the sequential EO-EC treatment.