☆ 4.7 Review

Productivity enhancement of solar still through heat transfer enhancement techniques in latent heat storage system: a review

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Passive solar stills coupled with Fresnel lens and phase change material for sustainable solar desalination in the tropics

Rubina Bahar et al.

Summary: Passive solar still with refraction-based concentration of solar irradiation can improve the performance of conventional passive solar stills for desalination. The prototypes using Fresnel lens and Phase Change Material achieved higher efficiency and productivity compared to traditional designs, with the collected freshwater meeting WHO standards.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination

D. Dsilva Winfred Rufuss et al.

Summary: By combining latent and sensible energy storage with magnetization, this study significantly increased the yield of solar stills, resulting in higher production compared to traditional stills at a lower cost. Environmental and economic parameters were also evaluated in the study.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation on semicircular, triangular and rectangular shaped absorber of solar still with nano-based PCM

Hamid Reza Goshayeshi et al.

Summary: This research aims to develop a system for continuous desalination, with experiments showing that higher mass fractions of paraffin + graphene oxide mixture can enhance daily freshwater production and exhibit better thermal performance on semicircular absorber. The findings can be applied to design more efficient absorbers for solar still parts.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Article Thermodynamics

Experimental enhancement of tubular solar still performance using rotating cylinder, nanoparticles' coating, parabolic solar concentrator, and phase change material

F. A. Essa et al.

Summary: This study improves the performance of tubular solar stills by using nanoparticle coating, parabolic solar concentrators, and phase change materials. The experimental results show that this improved design increases productivity, thermal efficiency, and reduces cost compared to conventional solar stills.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Self-powered solar desalination using solar still enhanced by external solar collector and phase change material

Mohammad Al-Harahsheh et al.

Summary: The performance of a self-powered double-glass cover solar still with phase change material (PCM) connected to solar collector was studied. The addition of PCM and the connection of an external solar collector significantly improved the productivity of the solar still.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Experimental analysis on single slope solar still by the inclusion of Agar-Agar (Eucheuma) Fibre and micro Phase Change Material for the productivity enhancement

Arivazhagan Sampathkumar et al.

Summary: The freshwater ecosystem is important for human well-being, but the scarcity of fresh water is a major challenge. This study explores the use of solar stills to convert seawater into potable water, with a focus on improving productivity by incorporating agar-agar fibers and micro-Phase Change Material into the absorber basin. The results show that these additions can significantly enhance the productivity and thermal efficiency of the solar still, leading to potential economic and environmental benefits.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Employing convex shape absorber for enhancing the performance of solar still desalination system

A. S. Abdullah et al.

Summary: This paper presents an experimental study on a new solar still called convex SS. The results showed that the convex SS had higher productivity compared to the conventional SS, especially at 15 cm convex height and with jute wick. Increasing the convex height increased the daily productivity until a peak was reached at 15 cm. Adding Ag nanoparticles to the black paint used on the convex surface and using thermal energy storage material (paraffin wax) mixed with Ag nanoparticles and Nano black paint further enhanced the daily productivity of the convex SS.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

A comparative study of various fatty acids as phase change material to enhance the freshwater productivity of solar still

Jyotin Kateshia et al.

Summary: The scarcity of potable water has become an impending crisis due to population growth, industrialization, and continuous groundwater extraction. Solar desalination using a solar still with phase change material (PCM) storage is a low-cost method to generate freshwater. This study conducted experimental, energy, exergy, and economic analysis on a conventional solar still and solar stills using different types of fatty acids as PCM storage with pin fins for enhanced heat transfer. The results showed that the solar still with stearic acid and pin fins had the highest economic efficiency among all cases.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Construction & Building Technology

Performance assessment of an inclined stepped solar still integrated with PCM and CuO/GO nanocomposite as a nanofluid

Habib Ajdari et al.

Summary: The study found that the use of nanocomposite CuO/GO can increase the water yield of solar stills. Additionally, adjusting the brine flow rate and applying paraffin wax as a phase change material both have an impact on the distillate yield.

JOURNAL OF BUILDING ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Development of a frugal solar still using phase change material and nanoparticles integrated with commercialization through a novel economic model

Varun Kumar Sonker et al.

Summary: By using paraffin wax and nanoparticles in a frugal solar still, a significant increase in distillation output has been observed. The use of phase change material (PCM) increased the yield, and the addition of nanoparticles further improved the yield. In addition, the use of non-phase change material (NPCM) also increased the evaporative heat transfer coefficient. Experimental results showed that the cost of distilled water was reduced by 40% and the payback period was 4.3 years for this energy-efficient solar still.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Enhancement of discs’ solar still performance using thermal energy storage unit and reflectors: An experimental approach

M.M. Younes et al.

Alexandria Engineering Journal (2022)

添加到收藏夹

Article Energy & Fuels

Investigating the energetic, exergetic, and sustainability aspects of a solar still integrating fins, wick, phase change materials, and external condenser

S. S. Tuly et al.

Summary: This experimental study investigates the improvement of a solar still with modifications such as fins, phase change materials, external condenser, and wick materials. The results show significant improvements in daily productivity and energy efficiency.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Performance study on solar still using nano disbanded phase change material (NDPCM)

P. Manoj Kumar et al.

Summary: This study examines the effect of crude wax and nano-zinc oxide particles-based organic phase changing material (PCM) and nano-dispersed crude wax (NDPCM) on the daily potable water output in a solar still. The results indicate that the addition of crude wax and specifically, the NDPCM, increased the clean water production by 50.24% and 65.17%, respectively.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Performance evaluation of PCM based solar concentrator type desalination device

Surendra Poonia et al.

Summary: In the water-stressed Thar desert of Rajasthan, a concentrating solar thermal desalination device was developed to address the limited surface water resources and brackish groundwater. The use of paraffin as a phase change material increased the system productivity and the economic analysis showed cost-efficiency. This device can effectively desalinate water for rural areas in the Thar desert.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Environmental Sciences

Performance improvements of single slope solar still using graphite plate fins and magnets

Ramasamy Dhivagar et al.

Summary: In this study, the performance of a single slope solar still was improved by utilizing graphite plate fins and magnets, which resulted in increased productivity, energy, and exergy efficiency compared to conventional solar stills under the same climate conditions. The economic and environmental benefits were evaluated over a 10-year period, showing reduced CO2 emissions and carbon credits earned with the improved solar still design. Distillate quality from both systems met the standards set by the Bureau of Indian Standards.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

添加到收藏夹

Article Environmental Sciences

Experimental investigation of single-basin solar still using solid staggered fins inserted in paraffin wax PCM bed for enhancing productivity

Subbarama Kousik Suraparaju et al.

Summary: The research found that the single-basin solar still with solid staggered pin finned absorber inserted into paraffin wax bed showed higher productivity and increased thermal efficiency at a seawater depth of 2 cm. Economic and environmental analysis revealed that the modified solar still had lower cost per liter of potable water produced and generated higher carbon credits compared to conventional solar still.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

添加到收藏夹

Article Environmental Sciences

Performance enhancement of single-slope solar still using phase change materials

Ahmed H. Mohammed et al.

Summary: The study found that using a solar still with phase change material in coastal areas of Egypt can improve productivity, especially when the weight of the phase change material is 4 kg. The use of phase change material also increases the yield during nighttime operation and raises the average basin water temperature.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

添加到收藏夹

Article Engineering, Chemical

Experimental investigation of the effects of low-temperature phase change material on single-slope solar still

Maryam Jahanpanah et al.

Summary: In the field of desalination, adding low-temperature phase change materials (PCM) can improve the overall productivity and efficiency of solar stills, especially the study on low-temperature PCM shows its potential. The experimental results show that adding a certain amount of PCM can significantly improve desalination efficiency and productivity.

DESALINATION (2021)

添加到收藏夹

Article Engineering, Chemical

Enhancing tubular solar still performance using novel PCM-tubes

Mohamed Elashmawy et al.

Summary: The study developed a novel PCM-tubes geometry for use in a tubular solar still with a parabolic solar concentrator, successfully enhancing freshwater productivity and device performance while reducing production costs. By using PCM-tubes, the productivity and efficiency of the device were improved by 40.51% and 38.25% respectively, making it a cost-effective solution compared to traditional solar desalination techniques. Further research is needed to continue improving the tubular solar still.

DESALINATION (2021)

添加到收藏夹

Article Energy & Fuels

Enhancing tubular solar still productivity using composite aluminum/copper/sand sensible energy storage tubes

Mohamed Elashmawy et al.

Summary: This study developed a new composite sensible heat storage tubes to improve freshwater productivity, with experiments conducted in Hall city, Saudi Arabia, showing enhancements in freshwater yield by 24.05% and thermal daily efficiency by 20.06%, and a 13% reduction in production cost, making it more efficient than previous studies in the literature.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

添加到收藏夹

Article Energy & Fuels

Energy, Exergy, and Economic analysis of low thermal conductivity basin solar still integrated with Phase Change Material for energy storage

V. S. Vigneswaran et al.

Summary: The use of acrylic as the material for the basin of a solar still incorporated with PCM helped to reduce the charging time of the PCM and improve the yield of the still. The yield and exergy efficiency of the acrylic-based still were higher compared to the other types of stills tested in the study.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Analysis of solar still integrated with phase change material and pin fins as absorbing material

Jyotin Kateshia et al.

Summary: The study demonstrates that in arid areas, using phase change material and pin fins in solar desalination can increase productivity and efficiency, making it a cost-effective option.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Environmental Sciences

Productivity enhancement of single-slope solar still with novel bottom finned absorber basin inserted in phase change material (PCM): techno-economic and enviro-economic analysis

Subbarama Kousik Suraparaju et al.

Summary: Solar still is an effective method for desalinating sea or brackish water. A novel bottom finned absorber basin was developed to improve freshwater productivity, with SSHFES showing the highest productivity compared to SSSFES and CSS. Economic analysis also showed that SSHFES is the most cost-effective option for potable water production.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

添加到收藏夹

Article Energy & Fuels

Performance enhancement of tubular solar still using nano-enhanced energy storage material integrated with v-corrugated aluminum basin, wick, and nanofluid

Gamal B. Abdelaziz et al.

Summary: By applying five alternative combinations on and under the still basin, the performance of tubular solar still can be significantly enhanced, including increased productivity and improved energy efficiency through the use of different materials and nanofluids.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Experimental investigation of stepped solar still with phase change material and external condenser

Seyed Sina Adibi Toosi et al.

Summary: This experimental study aims to enhance the distillate of the stepped solar still through additional improvers such as PCM chambers and an external condenser. The results showed significant improvements in productivity rate with the use of external condenser and PCM in stepped solar still under Iranian climate conditions.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Investigating a single slope solar still with a nano-phase change material

P. Manoj Kumar et al.

Summary: This study investigated the performance of a conventional single slope passive solar still with different phase change materials, showing that the addition of paraffin and nano-PCM increased fresh water production by 51.22% and 67.07% respectively.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Thermodynamics

Improving the performance of stepped solar still using a graphite and PCM as hybrid store materials with internal reflectors coupled with evacuated tube solar collector

A. E. Kabeel et al.

HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Environmental Sciences

Improving the performance of solar still using different heat localization materials

Swellam Wafa Sharshir et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

添加到收藏夹

Article Energy & Fuels

Comparative study on the multistage solar still performance utilizing PCM in variable thicknesses

Majid Ghadamgahi et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Enhancement of pyramid-shaped solar stills performance using a high thermal conductivity absorber plate and cooling the glass cover

A. E. Kabeel et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Experimental study on tubular solar still using Graphene Oxide Nano particles in Phase Change Material (NPCM's) for fresh water production

A. E. Kabeel et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Theoretical modeling of a glass-cooled solar still incorporating PCM and coupled to flat plate solar collector

Mousa Abu-Arabi et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Performance enhancement of pyramid-shaped solar stills using hollow circular fins and phase change materials

A. E. Kabeel et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Improving the trays solar still performance using reflectors and phase change material with nanoparticles

A. S. Abdullah et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Augmentation of diurnal and nocturnal distillate of modified tubular solar still having copper tubes filled with PCM in the basin

A. E. Kabeel et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of graphite mass concentrations in a mixture of graphite nanoparticles and paraffin wax as hybrid storage materials on performances of solar still

A. E. Kabeel et al.

RENEWABLE ENERGY (2019)

添加到收藏夹

Article Engineering, Chemical

Performance of solar still using shape-stabilized PCM: Experimental and theoretical investigation

Wen-Long Cheng et al.

DESALINATION (2019)

添加到收藏夹

Article Energy & Fuels

Solar Still Efficiency Enhancement by Using Graphene Oxide/Paraffin Nano-PCM

Mohammad Reza Safaei et al.

ENERGIES (2019)

添加到收藏夹

Article Thermodynamics

Augmentation of a pyramid solar still performance using evacuated tubes and nanofluid: Experimental approach

Swellam W. Sharshir et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental investigation of a solar still with composite material heat storage: Energy, exergy and economic analysis

A. E. Kabeel et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Engineering, Chemical

Enhanced solar still condensation by using a radiative cooling system and phase change material

A. Amarloo et al.

DESALINATION (2019)

添加到收藏夹

Article Engineering, Chemical

An experimental study on the efficacy of modifications in enhancing the performance of single basin double slope solar still

S. Joe Patrick Gnanaraj et al.

DESALINATION (2019)

添加到收藏夹

Article Thermodynamics

Energetic and exergetic performance assessment of the inclusion of phase change materials (PCM) in a solar distillation system

Mohamed S. Yousef et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Energy & Fuels

Experimental study and analysis of solar still desalination using phase change materials

Hasan Mousa et al.

JOURNAL OF ENERGY STORAGE (2019)

添加到收藏夹

Article Energy & Fuels

Augmenting the productivity of solar still using multiple PCMs as heat energy storage

V. S. Vigneswaran et al.

JOURNAL OF ENERGY STORAGE (2019)

添加到收藏夹

Proceedings Paper Energy & Fuels

An experimental study on the performance of single slope solar still integrated with a PCM-based pin-finned heat sink

Mohamed S. Yousef et al.

5TH INTERNATIONAL CONFERENCE ON POWER AND ENERGY SYSTEMS ENGINEERING (CPESE 2018) (2019)

添加到收藏夹

Article Thermodynamics

Solar desalination using solar still enhanced by external solar collector and PCM

Mohammad Al-harahsheh et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Engineering, Chemical

Theoretical investigation of solar desalination with solar still having phase change material and connected to a solar collector

Mousa Abu-Arabi et al.

DESALINATION (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Modified pyramid solar still with v-corrugated absorber plate and PCM as a thermal storage medium

A. E. Kabeel et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Proceedings Paper Energy & Fuels

Nanoparticles Enhanced Phase Change Material (NPCM) as Heat Storage in Solar Still Application for Productivity Enhancement

D. Dsilva Winfred Rufuss et al.

POWER AND ENERGY SYSTEMS ENGINEERING, (CPESE 2017) (2017)

添加到收藏夹

Article Engineering, Chemical

Effect of phase change material on concentric circular tubular solar still-Integration meets enhancement

T. Arunkumar et al.

DESALINATION (2017)

添加到收藏夹

Article Energy & Fuels

The effects of flake graphite nanoparticles, phase change material, and film cooling on the solar still performance

S. W. Sharshir et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Performance assessment and productivity of a simple-type solar still integrated with nanocomposite energy storage system

Ashraf Elfasakhany

APPLIED ENERGY (2016)

添加到收藏夹

Article Engineering, Chemical

An experimental investigation of a v-corrugated absorber single-basin solar still using PCM

S. M. Shalaby et al.

DESALINATION (2016)

添加到收藏夹

Article Engineering, Chemical

Improving the performance of solar still by using PCM as a thermal storage medium under Egyptian conditions

A. E. Kabeel et al.

DESALINATION (2016)

添加到收藏夹

Article Engineering, Chemical

The performance of a modified solar still using hot air injection and PCM

A. E. Kabeel et al.

DESALINATION (2016)

添加到收藏夹

Article Thermodynamics

Improving the yield of fresh water in conventional solar still using low cost energy storage material

D. G. Harris Samuel et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Factors affecting basin type solar still productivity: A detailed review

Ali F. Muftah et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

添加到收藏夹

Article Thermodynamics

MODELLING OF SOLAR DISTILLATION SYSTEM WITH PHASE CHANGE MATERIAL STORAGE MEDIUM

Ali A. F. Al-Hamadani et al.

THERMAL SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

Improving the performance of stepped solar still

A. S. Abdullah

DESALINATION (2013)

添加到收藏夹

Article Engineering, Chemical

The augmentation of distillate yield by using concentrator coupled solar still with phase change material

T. Arunkumar et al.

DESALINATION (2013)

添加到收藏夹

Article Engineering, Chemical

Desalination and hot water production using solar still enhanced by external solar collector

Hasan Mousa et al.

DESALINATION AND WATER TREATMENT (2013)

添加到收藏夹

Article Green & Sustainable Science & Technology

Phase Change Material on Augmentation of Fresh Water Production Using Pyramid Solar Still

S. Ravishankar et al.

INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT-IJRED (2013)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review on effect of phase change material encapsulation on the thermal performance of a system

Pramod B. Salunkhe et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

添加到收藏夹

Review Public, Environmental & Occupational Health

Climate change impacts on water salinity and health

Paolo Vineis et al.

JOURNAL OF EPIDEMIOLOGY AND GLOBAL HEALTH (2011)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review on thermal energy storage with phase change materials and applications

Atul Sharma et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

添加到收藏夹

Article Energy & Fuels

A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins

Francis Agyenim et al.

SOLAR ENERGY (2009)

添加到收藏夹

Article Engineering, Chemical

Advances in seawater desalination technologies

Akili D. Khawaji et al.

DESALINATION (2008)

添加到收藏夹

Article Engineering, Chemical

Separation of carcinogenic aromatic amines in the food colourants plant wastewater treatment

Shengquan Ye et al.

DESALINATION (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.