4.7 Article

Novel meter-scale seismic metamaterial with low-frequency wide bandgap for Lamb waves

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Acoustics

Experimental realization of negative refraction and subwavelength for flexural waves in

Hrishikesh Danawe et al.

Summary: In this paper, negative refraction of flexural waves in phononic crystal (PC) plates was demonstrated for designing flat elastic lenses. A thickness contrast-based plate design was proposed to achieve refractive index equal to-1 at the interface of the PC and host plate, allowing for wave number matching in the all angle negative refraction (AANR) frequency regime. The PC-lens design was verified to achieve subwavelength imaging of an omnidirectional excitation source by tuning the thickness contrast between the plate and PC.

JOURNAL OF SOUND AND VIBRATION (2022)

Article Mechanics

Tunable band structures design for elastic wave transmission in tension metamaterial chain

Cang He et al.

Summary: This study introduces a mechanism for manipulating band structures by adjusting string tensions, allowing for the simultaneous shifting of Bragg and local resonance band gaps, as well as achieving ultra-wide band gaps and narrow band filters.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2022)

Article Engineering, Mechanical

A novel auxetic acoustic metamaterial plate with tunable bandgap

Zhi Tao et al.

Summary: This study proposes an acoustic metamaterial plate based on the negative Poisson's ratio structure, which has lower frequency, wider bandgap, and tunable bandgap compared to traditional plates. By increasing compression strain, the variation range of the bandgap frequency can be enlarged. This finding broadens the design of low-frequency broadband acoustic devices for dynamic environments, while providing new ideas and methodologies for real-time adjustment of bandgaps.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Article Engineering, Mechanical

Seismic metamaterials: Generating low-frequency bandgaps induced by inertial amplification

Yi Zeng et al.

Summary: Seismic metamaterials have received significant attention in the past two decades due to their ability to control seismic surface waves. In this study, a new type of seismic metamaterial with a low-frequency bandgap induced by inertial amplification is proposed to isolate seismic surface waves. Experimental results using a metamaterial plate composed of 25 unit cells demonstrate the characteristics of the bandgap induced by inertial amplification. The imaging of flexural waves by a scanning laser Doppler vibrometer shows strong attenuation effects in the bandgap caused by the metamaterial plate. The broadband attenuation is investigated using two different types of unit cells. Finally, similar structures with inertial amplification are introduced to design seismic metamaterials for isolating seismic surface waves at low frequencies.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Article Materials Science, Multidisciplinary

Inverse design of reconfigurable piezoelectric topological phononic plates

Xiaoying Zhuang et al.

Summary: This paper presents a methodology for inverse design of reconfigurable topological insulators in plate-like structures. By utilizing topology optimization and piezoelectric patches, the space inversion symmetry is broken, leading to the real-time reconfigurability of topological interfaces for waveguide applications.

MATERIALS & DESIGN (2022)

Article Acoustics

Dual-tuning mechanism for elastic wave transmission in a triatomic lattice with string stiffening

Cang He et al.

Summary: This study investigates the effect of taut strings with adjustable tensions on the frequency spectra for elastic waves transmission in a triatomic lattice. The results show that the bandgaps become wider as greater tensions are exerted, and the string-tuning bandgaps can exhibit non-Hermitian form in multi-atomic lattices. The transmission properties and energy distribution of the corresponding finite system composed of such basic units are also analyzed. It is found that when high-amplitude waves enter with strings tightened, the tension and vibrational amplitude have a dual-tuning effect on the bandgaps.

WAVE MOTION (2022)

Article Instruments & Instrumentation

A novel re-entrant honeycomb metamaterial with tunable bandgap

Zhi Tao et al.

Summary: A new auxetic metamaterial with a re-entrant honeycomb structure and hierarchical characteristics is proposed. The overall stiffness and stability of the structure can be tuned during compression and tension, and it also has better acoustic performance compared to traditional re-entrant honeycomb structures. Numerical analysis shows that the structure has tunable bandgap characteristics, and the transmittance of finite period size verifies the numerical results.

SMART MATERIALS AND STRUCTURES (2022)

Article Physics, Condensed Matter

The deformation induced tunable topology in controlling of band gap characteristics for stepped phononic crystals

Y. F. Wang et al.

Summary: A new deformation mode induced by welding is proposed for controlling the band gap characteristics in stepped phononic crystals. The stiffness change is found to be the key physical nature connecting the deformation-induced tunable topology with the wave attenuations in phononic crystals. By optimally controlling the weld distortion and the formed fillet weld, a wider new band gap can be generated.

SOLID STATE COMMUNICATIONS (2022)

Article Construction & Building Technology

Hysteretic behavior of viscoelastic dampers subjected to damage during seismic loading

Wang-Chuen Lin et al.

Summary: In this study, the seismic response of a full-scale viscoelastic (VE) damper was tested by numerically analyzing a viscoelastically damped structure. The results showed that the VE damper remained intact and exhibited the design performance before being subjected to a shear strain of approximately 700%. The accuracy of the fractional derivative model at the design performance stage was verified by comparing the experimental seismic responses with predictions.

JOURNAL OF BUILDING ENGINEERING (2022)

Review Geosciences, Multidisciplinary

Ten years after the 2011 Tohoku-oki earthquake and tsunami: Geological and environmental effects and implications for disaster policy changes

Kazuhisa Goto et al.

Summary: The 2011 Tohoku-oki earthquake and tsunami had devastating effects on coastal environments, but many of these impacts have since naturally or artificially recovered. Despite efforts by the government to prepare for future events, there is still uncertainty in forecasting tsunamis and raising public awareness. The challenges of predicting low-frequency tsunami events and fostering a social consensus for preparedness remain unresolved since the 2011 event.

EARTH-SCIENCE REVIEWS (2021)

Article Engineering, Civil

Based on auxetic foam: A novel type of seismic metamaterial for Lamb waves

Ting Ting Huang et al.

Summary: Seismic metamaterial (SM) has gained significant attention in vibration isolation and damping due to its wave manipulation and bandgap properties. A novel 2D SM composed of auxetic foam and steel is proposed to attenuate seismic waves at ultra-low frequencies. Numerical simulations show that modifying the parameters of the components can enhance the bandgap and effectively attenuate seismic waves, aiming to cover the seismic peak spectrum at 2 Hz.

ENGINEERING STRUCTURES (2021)

Article Engineering, Civil

Effect of epicentral distance on the applicability of base isolation and energy dissipation systems to improve seismic behavior of RC buildings

J. M. Jara et al.

Summary: The study analyzed the feasibility of using passive control devices in different seismic intensity zones, evaluating their impact on buildings' seismic responses. The results showed the influence of building height and site location on seismic demands, with a particular emphasis on evaluating the effects of passive control devices on buildings.

ENGINEERING STRUCTURES (2021)

Article Thermodynamics

Geometric phase, effective conductivity enhancement, and invisibility cloak in thermal convection-conduction

Liujun Xu et al.

Summary: Geometric phase, a fundamental concept in both quantum and classical systems, has been experimentally demonstrated in a macroscopic thermal convection-conduction system. The results broaden the scope of geometric phase applications in the field of thermal management, showing potential for effective conductivity enhancement.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Computer Science, Interdisciplinary Applications

Spectral extended finite element method for band structure calculations in phononic crystals

Eric B. Chin et al.

Summary: This paper computes the band structure of one- and two-dimensional phononic composites using X-FEM on structured higher-order finite element meshes. By using partition-of-unity enrichment, structured finite element meshes can be used without conforming to the geometry of holes and inclusions, eliminating the need for remeshing. The method demonstrates high accuracy and optimal convergence on structured, higher-order spectral finite element meshes.

JOURNAL OF COMPUTATIONAL PHYSICS (2021)

Review Engineering, Civil

A state-of-the-art review on passive friction dampers and their applications

Sujit Jaisee et al.

Summary: Friction type passive energy dissipation devices, particularly friction dampers, are favored for seismic fortification of engineering structures due to their simplicity, reliability, and ability to dissipate maximum energy without being significantly influenced by loading variables. Since the 1980s, numerous novel passive dry friction dampers have been developed and applied in civil engineering, with a better understanding of friction mechanisms and behaviors. Decades of research on these dampers have been highly scattered throughout the academic community, prompting the need for a systematic overview in this field to facilitate further studies and guide future research directions.

ENGINEERING STRUCTURES (2021)

Article Materials Science, Multidisciplinary

Broadband inverted T-shaped seismic metamaterial

Yi Zeng et al.

Summary: This study introduces a seismic metamaterial consisting of inverted T-shaped structures with an ultra-wide first bandgap for strong attenuation of seismic waves. By analyzing complex band structures, it is found that the bandgap is divided into two parts with surface evanescent waves and no surface modes, affecting the propagation of seismic surface waves differently. The effectiveness of the ultra-wide bandgap is validated through large-scale field experiments with a two-dimensional version of the metamaterial.

MATERIALS & DESIGN (2021)

Article Construction & Building Technology

Seismic collapse safety analysis of performance-based optimally designed reinforced concrete frames considering life-cycle cost

Navid Razavi et al.

Summary: This paper evaluates the seismic collapse capacity of RC frames optimized in the context of performance-based design, using a methodology that includes performance-based design optimization and seismic collapse safety assessment. The study demonstrates the effectiveness of the proposed methodology in designing cost-efficient structures with significant seismic collapse safety through three illustrative examples of RC frames.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Engineering, Multidisciplinary

A hybrid plane wave expansion/edge-based smoothed finite element method for band structures simulation of semi-infinite beam-like phononic crystals

J. H. Cheng et al.

Summary: This paper presents a hybrid PWE/ES-FEM method for band structures simulation of semi-infinite beam-like phononic crystals. The method uses linear shape functions and spatial Fourier series for field variable approximation, along with edge-based smoothing and GST for strain smoothing. Numerical examples show that the method has higher computational accuracy in band structures simulation of semi-infinite beam-like PCs.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2021)

Article Mathematics, Applied

Optimal control for electromagnetic cloaking metamaterial parameters design

Zhiwei Fang et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2020)

Article Mechanics

A Matryoshka-like seismic metamaterial with wide band-gap characteristics

Yi Zeng et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Article Engineering, Multidisciplinary

Designing phononic crystal with anticipated band gap through a deep learning based data-driven method

Xiang Li et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

Article Physics, Multidisciplinary

Emergence of seismic metamaterials: Current state and future perspectives

Stephane Brule et al.

PHYSICS LETTERS A (2020)

Article Engineering, Multidisciplinary

A localized meshless collocation method for bandgap calculation of anti-plane waves in 2D solid phononic crystals

Zhuo-Jia Fu et al.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2020)

Article Acoustics

Generation of a mode in phononic crystal based on 1D/2D structures

A. Trzaskowska et al.

ULTRASONICS (2020)

Article Construction & Building Technology

Trees as large-scale natural metamaterials for low-frequency vibration reduction

Yi-fan Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Materials Science, Multidisciplinary

Inherent negative refraction on acoustic branch of two dimensional phononic crystals

Sia Nemat-Nasser

MECHANICS OF MATERIALS (2019)

Article Physics, Condensed Matter

Ultrawide band gap design of phononic crystals based on topological optimization

Kai Wang et al.

PHYSICA B-CONDENSED MATTER (2019)

Article Materials Science, Multidisciplinary

Inverse design of quantum spin hall-based phononic topological insulators

S. S. Nanthakumar et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)

Article Physics, Applied

H-fractal seismic metamaterial with broadband low-frequency bandgaps

Qiujiao Du et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2018)

Review Acoustics

Nonlinear dissipative devices in structural vibration control: A review

Zheng Lu et al.

JOURNAL OF SOUND AND VIBRATION (2018)

Article Engineering, Mechanical

An improved fast plane wave expansion method for topology optimization of phononic crystals

Longxiang Xie et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Article Nanoscience & Nanotechnology

Elastic metamaterial-based seismic shield for both Lamb and surface waves

Qiujiao Du et al.

AIP ADVANCES (2017)

Article Multidisciplinary Sciences

Forests as a natural seismic metamaterial: Rayleigh wave bandgaps induced by local resonances

Andrea Colombi et al.

SCIENTIFIC REPORTS (2016)

Article Engineering, Mechanical

Seismic waves damping with arrays of inertial resonators

Younes Achaoui et al.

EXTREME MECHANICS LETTERS (2016)

Article Engineering, Mechanical

Wide band-gap seismic metastructures

S. Kroedel et al.

EXTREME MECHANICS LETTERS (2015)

Article Physics, Applied

Seismic isolation of two dimensional periodic foundations

Y. Yan et al.

JOURNAL OF APPLIED PHYSICS (2014)

Article Multidisciplinary Sciences

An elasto-mechanical unfeelability cloak made of pentamode metamaterials

T. Bueckmann et al.

NATURE COMMUNICATIONS (2014)

Article Engineering, Civil

Novel composite periodic structures with attenuation zones

Zhibao Cheng et al.

ENGINEERING STRUCTURES (2013)

Article Engineering, Geological

Feasibility of reducing three-dimensional wave energy by introducing periodic foundations

Zhifei Shi et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2013)

Article Engineering, Geological

Application of Periodic Theory to Rows of Piles for Horizontal Vibration Attenuation

Jiankun Huang et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2013)

Article Physics, Multidisciplinary

Experiments on Elastic Cloaking in Thin Plates

Nicolas Stenger et al.

PHYSICAL REVIEW LETTERS (2012)

Article Mechanics

Elastic metamaterials with local resonances: an overview

Xiaoming Zhou et al.

THEORETICAL AND APPLIED MECHANICS LETTERS (2012)

Article Engineering, Civil

Evaluation of buckling-restrained braced frame seismic performance considering reserve strength

Christopher Ariyaratana et al.

ENGINEERING STRUCTURES (2011)

Article Engineering, Civil

Reducing residual drift of buckling-restrained braced frames as a dual system

Shawn Kiggins et al.

ENGINEERING STRUCTURES (2006)

Article Materials Science, Multidisciplinary

Three-component elastic wave band-gap material

ZY Liu et al.

PHYSICAL REVIEW B (2002)

Article Materials Science, Multidisciplinary

Band structure of acoustic waves in phononic lattices: Two-dimensional composites with large acoustic mismatch

Y Tanaka et al.

PHYSICAL REVIEW B (2000)

Article Multidisciplinary Sciences

Locally resonant sonic materials

ZY Liu et al.

SCIENCE (2000)

Article Physics, Multidisciplinary

Theory and experiments on elastic band gaps

D García-Pablos et al.

PHYSICAL REVIEW LETTERS (2000)