☆ 4.7 Article

Multi-objective optimization of proton exchange membrane fuel cells by RSM and NSGA-II

ENERGY CONVERSION AND MANAGEMENT (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Effects of structure parameters of tube outlet on the performance of a hydrogen-fueled micro planar combustor for thermophotovoltaic applications

Wei Zuo et al.

Summary: A hydrogen-fueled micro planar combustor with tube outlet is designed to improve the energy output power and energy conversion efficiency for micro-thermophotovoltaic system. The effects of tube outlet structure parameters on the performance of micro planar combustor are numerically investigated. The results show that increasing the tube distance slightly improves the energy output and conversion efficiency, and reduces the pressure loss. Additionally, using square tubes instead of circular tubes is more suitable for the MTPV system, and increasing the number of tubes significantly enhances the energy output and conversion efficiency while reducing pressure loss.

ENERGY (2023)

添加到收藏夹

Article Thermodynamics

Numerical investigations on the performance of a hydrogen-fueled micro planar combustor with tube outlet for thermophotovoltaic applications

Wei Zuo et al.

Summary: Optimizing the structure of micro combustors to enhance their thermal performance can effectively improve the output power and energy conversion efficiency of micro thermophotovoltaic systems. The introduction of a tube outlet can effectively increase the mean outer wall temperature and temperature uniformity of micro planar combustors, as well as the energy output and energy conversion efficiency of MTPV system, but it also leads to higher pressure loss. The energy output and energy conversion efficiency of MTPV system can be further increased by reducing the tube length and increasing the tube diameter, while the pressure loss decreases slowly. When nickel is used as the solid wall material, the energy output and energy conversion efficiency of MTPV system can reach 6.14 W and 3.54%, respectively.

ENERGY (2023)

添加到收藏夹

Review Chemistry, Physical

Silicon nanostructures for solid-state hydrogen storage: A review

Rama Chandra Muduli et al.

Summary: This article discusses the importance and application of solid-state hydrogen storage technology, particularly the role of silicon nanostructures in solid-state hydrogen storage. It also emphasizes the importance of catalysts in addressing issues related to hydrogen energy storage.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

添加到收藏夹

Article Engineering, Environmental

Effects of various operating conditions and optimal ionomer-gradient distribution on temperature-driven water transport in cathode catalyst layer of PEMFC

Yiming Xu et al.

Summary: The temperature distribution plays a crucial role in water transport by phase-change-induced flow in the cathode catalyst layer. This study investigates the impact of operating temperature and inlet relative humidity on the relationship between capillary-driven flow and phase-change-induced flow. The results show that raising the operating temperature increases the dominance of phase-change-induced flow, while optimizing the catalyst layer gradient structure enhances the overall mass transport capability and output performance.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Thermodynamics

Parametric study of cavity on the performance of a hydrogen-fueled micro planar combustor for thermophotovoltaic applications

Wei Zuo et al.

Summary: A hydrogen-fueled micro planar combustor with cavity is designed to achieve high energy output power and energy conversion efficiency for micro-thermophotovoltaic system. Numerical investigations show that the micro planar combustor with cavity can achieve higher and more uniform outer wall temperature. With the reduction of cavity length and outlet size, the energy output and energy conversion efficiency of MTPV increase, but the pressure loss also becomes larger. The optimal dimensionless cavity length and outlet size are found to be 3/9 and 5/7 x 1/3, respectively. Nickel is identified as the optimal solid wall material for higher energy conversion efficiency, reaching 3.86% at an inlet velocity of 5 m/s. Therefore, the micro planar combustor with cavity is more suitable for MTPV system with higher energy output and energy conversion efficiency.

ENERGY (2023)

添加到收藏夹

Article Thermodynamics

An open-cathode PEMFC efficiency optimization strategy based on exergy analysis and data-driven modeling

Bo Deng et al.

Summary: In open-cathode proton exchange membrane fuel cell (PEMFC) stacks, the fan plays a critical role in providing air supply and dissipating heat, which contributes significantly to the parasitic power in the stack system and affects energy utilization efficiency. Previous studies have neglected the qualitative differences in energy and emphasized the importance of exergy analysis to evaluate energy utilization in the stack. This paper presents an exergy analysis-based and data-driven PEMFC model, along with an optimization strategy, to determine the optimal exergy efficiency and fan power values at different temperatures. The results show significant improvements in exergy efficiency for different load currents, suggesting the potential of the proposed optimization strategy in controlling and optimizing PEMFC systems.

ENERGY (2023)

添加到收藏夹

Article Thermodynamics

Experimental study of the influence of dynamic load cycle and operating parameters on the durability of PEMFC

Tiankuo Chu et al.

Summary: The study investigated the impact of different dynamic load cycles on the performance of proton exchange membrane fuel cells, finding that DLC-02 exhibited lower voltage degradation at low current densities, especially in the first 400 hours. The evolution of resistance types and a proposed formula for calculating polarization losses were key findings in distinguishing the sources of voltage loss.

ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energy, exergy, environmental and economic analyzes (4E) and multi-objective optimization of a PEM fuel cell equipped with coolant channels

Bing Mei et al.

Summary: This study investigates the energy, exergy, environmental, and economic analysis of a PEM fuel cell. The results show that simultaneous use of nanofluid and porous metal foam for cooling the fuel cell may not be appropriate, while using porous metal foam can enhance the cooling effect of the fuel cell.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Performance comparison between single S-channel and double S-channel cold plate for thermal management of a prismatic LiFePO4 battery

Wei Zuo et al.

Summary: A double S-channel cold plate is designed for cooling a battery, which can reduce temperature difference and pressure drop, and improve overall thermal performance evaluation compared to a single S-channel cold plate.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Cathode side transport phenomena investigation and Multi-Objective optimization of a tapered parallel flow field PEMFC

Mehrdad Ghasabehi et al.

Summary: This study investigates and optimizes the transport phenomena in a tapered parallel flow field. The research shows that the Multi-Objective Particle Swarm Optimization (MOPSO) outperforms the Non-dominated Sorting Genetic Algorithm II (NSGA-II). The Technique of Order Preference Similarity to the Ideal Solution (TOPSIS) is used to select the optimal point, and good correspondence with experimental data is observed. Porosity and pressure play significant roles in determining water saturation and resistance.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Thermodynamics

Thermodynamic and exergy analysis of a novel PEMFC-ORC-MH combined integrated energy system

Yuhang Wang et al.

Summary: This study presents a novel integrated energy system coupling PEMFC, ORC system, and MH hydrogen storage system to improve energy utilization through waste heat recovery. The system shows significantly improved performance compared to a single PEMFC, with a rise in output power, electrical efficiency, energy efficiency, and exergy efficiency. Parameters such as superheat temperature, saturation pressure, and hydrogen weight fraction have a significant impact on system performance.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Chemistry, Physical

Study of the effect of mechanical uncertainties parameters on performance of PEMFC by coupling a 3D numerical multiphysics model and design of experiment

Ghinwa Ouaidat et al.

Summary: This paper proposes a method to optimize fuel cell performance using a multiphysics model and design of experiments, including 3D finite element analysis and optimization of mechanical parameters. It is of great significance for improving the reliability and durability of fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

High temperature annealed (002) oriented WO3 nanoplatelets with uniform Pt decoration as durable carbon free anode electrocatalyst for PEMFC application

A. R. Dhanya et al.

Summary: This article introduces a stable and durable metal oxide catalyst Pt/WO3 for Proton Exchange Membrane Fuel Cells (PEMFCs) to address carbon corrosion issues. The research findings demonstrate that Pt/WO3 exhibits comparable performance to commercial carbon-based catalyst Pt/C and maintains good stability after 24-hour testing.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effects of operating conditions, various properties of the gas diffusion layer, and shape of endplate on the open-cathode proton exchange membrane fuel cell performance

Jaebong Sim et al.

Summary: Research on removing and miniaturizing balance of plants to increase power density per unit volume in proton exchange membrane fuel cells (PEMFCs) is crucial. This study systematically investigates the effects of various experimental variables on the performance of open-cathode PEMFCs and proposes improvements.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Design and multi-objective optimization of low-temperature proton exchange membrane fuel cells with efficient water recovery and high electrochemical performance

Jing Yao et al.

Summary: This paper develops a two-dimensional model to investigate the fluid flow and mass transfer in proton exchange membrane fuel cells (PEMFC) and studies the effects of operating parameters on both the electrochemical performance and water recovery performance. The results show that optimizing water recovery performance can be achieved by decreasing the humidification temperature and increasing the relative humidity at the cathode inlet.

APPLIED ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Performance evaluation on thermodynamics-economy-environment of PEMFC vehicle power system under dynamic condition

Xi Chen et al.

Summary: In this paper, a vehicle PEMFC power system model is established to study the influence of auxiliary equipment energy consumption on fuel cell power system efficiency and total system cost. The mapping relationship between operating parameters and thermodynamic system performance is analyzed, and the results of system output and cost estimation are obtained.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Energy & Fuels

Life cycle assessment of methanol vehicles from energy, environmental and economic perspectives

Lina Luo et al.

Summary: As a new alternative fuel vehicle, methanol vehicles in China have shown promising development in energy reserve strategy. Pilot projects have demonstrated that methanol vehicles can effectively reduce fuel costs and pollutant emissions. This research uses the Energy, Environment, and Economy evaluation method to compare methanol vehicles with electric vehicles, compressed natural gas vehicles, and gasoline vehicles in terms of energy consumption, environmental emissions, and economic benefit. The results show that methanol vehicles have higher total energy consumption but lower greenhouse gas emissions compared to gasoline vehicles. Moreover, methanol vehicles demonstrate better economic benefits than gasoline vehicles. It is also found that due to low renovation costs and fuel prices, methanol vehicles have better development potential in the economic-oriented and equilibrium scenarios compared to electric and compressed natural gas vehicles.

ENERGY REPORTS (2022)

添加到收藏夹

Article Thermodynamics

Performance analysis and optimization of a PEMFC-CAORC system based on 3D construction method of thermodynamic cycle

Guokun Liu et al.

Summary: A novel PEMFC-CAORC system is proposed to maximize power output by recovering waste heat through CAORC system; System energy and exergy efficiencies vary with PEMFC operating conditions, and genetic algorithm optimization increases CAORC thermal efficiency by over 4%.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

Investigation of optimal operating temperature for the PEMFC and its tracking control for energy saving in vehicle applications

Donghai Hu et al.

Summary: This paper investigates the impact of operating temperature on PEMFC efficiency, optimizing the temperature control of the PEMFC system to improve efficiency by decoupling the operating temperature from driving conditions. The study demonstrates significant increases in efficiency under optimal temperature tracking control compared to constant temperature control and traditional rule-based control.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

Energy-exergy analysis of an integrated small-scale LT-PEMFC based on steam methane reforming process

Zaixing Wang et al.

Summary: This study introduces a novel integrated system for power generation utilizing on-site produced hydrogen and heat recovery. Through detailed parametric analysis and thermodynamic evaluation, the system achieved high energy and exergy efficiencies under specific operating parameters. The primary source of exergy destruction within the system was identified as the PEMFC stack.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

4E analysis and multiobjective optimization of a PEMFC-based CCHP system with dehumidification

Junjie Zhao et al.

Summary: This paper proposes a novel PEMFC-based CCHP system with independent control of refrigeration and dehumidification for data centers. The effects of operating parameters on the 4E are investigated and multiobjective optimization is carried out. Results show that increasing inlet pressure and cooling water mass flow can improve system efficiency and reduce annual GHG emissions.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

Analysis of the impact of flow field arrangement on the performance of PEMFC with zigzag-shaped channels

Zihao Liao et al.

Summary: The flow field configuration of a PEMFC is crucial for performance enhancement, and the study found that the contrary arrangement design provides more uniform distributions of reactants and reaction products compared to traditional designs. Additionally, the contrary arrangement design reduces mass transport resistance and boosts heat/mass transfer rates, especially under higher relative humidity and larger operating pressure conditions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Multi-objective optimization of PEM fuel cell by coupled significant variables recognition, surrogate models and a multi-objective genetic algorithm

Hongwei Li et al.

Summary: This paper presents a fast and systematic optimization approach for PEMFC by combining variance analysis, surrogate models, and NSGA-II. By optimizing power density, system efficiency, and oxygen distribution uniformity simultaneously, the study demonstrates the success of this method in solving time-consuming multi-optimization problems efficiently.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Energy & Fuels

Numerical analysis of the effect of anisotropic gas diffusion layer permeability on polymer electrolyte membrane fuel cell performance with various channel types

Jonghyun Son et al.

Summary: This study used computational fluid dynamics to analyze the impact of directional permeability of the gas diffusion layer on PEMFC performance in models with three types of channels. Results showed that x direction permeability had the most influence on performance, particularly for the serpentine channel type.

FUEL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Designing the next generation of proton-exchange membrane fuel cells

Kui Jiao et al.

Summary: The rapid growth of proton-exchange membrane fuel cell technology is driving the demand for clean and sustainable global energy applications. Increasing PEMFC power density is critical for commercialization, with ambitious goals set globally. Future high-power-density PEMFCs will focus on improving membrane electrode assembly components, water and thermal management, and materials.

NATURE (2021)

添加到收藏夹

Article Energy & Fuels

3D investigation of the channel cross-section configuration effect on the power delivered by PEMFCs with straight channels

Abdallah Mohammedi et al.

FUEL (2020)

添加到收藏夹

Review Engineering, Aerospace

Current technologies and challenges of applying fuel cell hybrid propulsion systems in unmanned aerial vehicles

Bin Wang et al.

PROGRESS IN AEROSPACE SCIENCES (2020)

添加到收藏夹

Article Chemistry, Physical

An experimental study of cell performance and pressure drop of proton exchange membrane fuel cells with baffled flow channels

Hao Chen et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Applied

Effects of fuel composition and wall thermal conductivity on thermal and NOx emission performances of an ammonia/hydrogen-oxygen micro-power system

Tao Cai et al.

FUEL PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Energy & Fuels

Experimental Investigations on Cell Performance of Proton Exchange Membrane Fuel Cells with Orientated-Type Flow Channels

Hao Chen et al.

JOURNAL OF ENERGY ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Comprehensive comparative evaluation of different possible optimization scenarios for a polymer electrolyte membrane fuel cell

Ali Sohani et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Characterizing hydrogen-fuelled pulsating combustion on thermodynamic properties of a combustor

Dan Zhao et al.

COMMUNICATIONS PHYSICS (2019)

添加到收藏夹

Article Thermodynamics

Energy and exergy analyses of a stand-alone HT-PEMFC based trigeneration system for residential applications

Suthida Authayanun et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Targeting optimized and robust operating conditions in a hydrogen-fed Proton Exchange Membrane Fuel Cell

Valter Silva et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Chemistry, Physical

Performance prediction of PEM fuel cell with wavy serpentine flow channel by using artificial neural network

Mehmet Seyhan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Parametric analysis and optimization of PEMFC system for maximum power and efficiency using MOEA/D

Xi Chen et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Electrochemistry

Balancing mass transport resistance and membrane resistance when tailoring microporous layer thickness for polymer electrolyte membrane fuel cells operating at high current densities

P. Antonacci et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Thermodynamics

Model development and optimization of operating conditions to maximize PEMFC performance by response surface methodology

Homayoon Kanani et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Energy & Fuels

Design and test of a 5 kWe high-temperature polymer electrolyte fuel cell system operated with diesel and kerosene

Remzi Can Samsun et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Thermodynamics

Nonorthogonality analysis of a thermoacoustic system with a premixed V-shaped flame

Chenzhen Ji et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

添加到收藏夹

Review Chemistry, Physical

Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review

A. P. Manso et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

添加到收藏夹

Article Chemistry, Physical

A multi-objective optimisation model for a general polymer electrolyte membrane fuel cell system

Sheila Mae C. Ang et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Electrochemistry

Three-Dimensional Modeling and Experimental Study of a High Temperature PBI-Based PEM Fuel Cell

E. U. Ubong et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)

添加到收藏夹

Article Chemistry, Physical

Transient response of a unit proton-exchange membrane fuel cell under various operating conditions

Junhyun Cho et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Chemistry, Physical

Robust design of battery/fuel cell hybrid systems-methodology for surrogate models of Pt stability and mitigation through system controls

Rajeswari Chandrasekaran et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Thermodynamics

The effects of buoyancy on the performance of a PEM fuel cell with a wave-like gas flow channel design by numerical investigation

Jenn-Kun Kuo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Global optimization of a simple mathematical model for a proton exchange membrane fuel cell

Kevin I. Chen et al.

COMPUTERS & CHEMICAL ENGINEERING (2006)

添加到收藏夹

Article Energy & Fuels

Exergetic performance analysis of a PEM fuel cell

M Ay et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2006)

添加到收藏夹

Article Chemistry, Physical

Effects of ambient conditions on fuel cell vehicle performance

K Haraldsson et al.

JOURNAL OF POWER SOURCES (2005)

添加到收藏夹

Article Thermodynamics

Exergy analysis of a PEM fuel cell at variable operating conditions

A Kazim

ENERGY CONVERSION AND MANAGEMENT (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.