☆ 4.7 Article

Comparative Study of the Correlation between Diffusion Length of Charge Carriers and the Performance of CsSnGeI3 Perovskite Solar Cells

ENERGY & FUELS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Lead-Free Perovskite Solar Cells with Over 10% Efficiency and Size 1 cm2 Enabled by Solvent-Crystallization Regulation in a Two-Step Deposition Method

Xiao Liu et al.

Summary: Researchers solved the efficiency decrease issue of tin perovskite solar cells with increased cell area by using a rarely used two-step deposition method that increased steric hindrance to hydroxyl in solvent molecules for dense and homogeneous film formation. The films fabricated with the two-step method exhibited higher uniformity in both horizontal and longitudinal directions, resulting in achieving over 10% power conversion efficiency for TPSCs. The cells maintained over 92% of its initial efficiency after operation under 1 sun illumination for 1000 hours.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Numerical Simulation of 30% Efficient Lead-Free Perovskite CsSnGeI3-Based Solar Cells

Hussein Sabbah

Summary: In this study, the lead-free CsSnGeI3 PSC was quantitatively analyzed using a solar cell capacitance simulator. The results showed that using SnO2 as the electron transport layer can significantly increase the PCE of the PSC. Furthermore, the defect density of the absorber layer was found to greatly affect the device efficiency.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Studying VOC in lead free inorganic perovskite photovoltaics by tuning energy bandgap and defect density

Indumathi Elango et al.

Summary: Researchers have made efforts to improve the stability of hybrid perovskite photovoltaics by substituting toxic element Pb with non-toxic element Sn, while also adopting various experimental strategies, including SCAPS simulation, to improve efficiency.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of single junction environmental friendly double perovskite (Cs2AuBiCl6) solar cell with 20.5% power conversion efficiency and negligible hysteresis

Anjan Kumar et al.

Summary: This study computationally simulates an all inorganic lead-free double perovskite-based solar cell and optimizes its overall performance. The proposed solar cell utilizes lead-free Cs2AuBiCl6 double perovskite as the main absorber material. By optimizing the device structure and parameters, the simulation achieves a high power conversion efficiency of 20.5% with almost negligible hysteresis.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance improvement approach of all inorganic perovskite solar cell with numerical simulation

Sagar Bhattarai et al.

Summary: Lead-halide perovskite-based solar cells are attracting attention for their improved efficiency, ease of fabrication, versatility, and flexibility; the presence of toxic lead raises concerns about the environment and health, driving the search for lead-free alternatives; a specific modeling technique was used to optimize cesium tin germanium halide-based solar cells and achieved a conversion efficiency of 28.4%.

MATERIALS TODAY COMMUNICATIONS (2022)

添加到收藏夹

Article Chemistry, Physical

Suppressing the formation of tin vacancy yields efficient lead-free perovskite solar cells

Shurong Wang et al.

Nano Energy (2022)

添加到收藏夹

Article Engineering, Environmental

Efficient and stable pure ?-phase FAPbI3 perovskite solar cells with a dual engineering strategy: Additive and dimensional engineering approaches

Sahira Hassan Kareem et al.

Summary: The study focuses on enhancing the performance and stability of formamidinium lead triiodide perovskite solar cells through a two-step engineering method. Results show improved photovoltaic properties, as well as long-term stability.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Energy & Fuels

Stable Hole-Transporting Material-Free Perovskite Solar Cells with Efficiency Exceeding 14% via the Introduction of a Malonic Acid Additive for a Perovskite Precursor

Mustafa K. A. Mohammed et al.

Summary: Hole transport material-free perovskite solar cells (HFPSCs) can be improved in stability and efficiency by adding malonic acid (MA), which increases crystallinity and reduces charge recombination and trap density. The MA-modified perovskite layer also has better water repellency and higher shelf stability.

ENERGY & FUELS (2022)

添加到收藏夹

Article Energy & Fuels

Ionic Liquid Passivator for Mesoporous Titanium Dioxide Electron Transport Layer to Enhance the Efficiency and Stability of Hole Conductor-Free Perovskite Solar Cells

Mustafa K. A. Mohammed et al.

Summary: Photovoltaic solar cells based on perovskite materials are good instruments for developing green energy. This study improves the efficiency and stability of perovskite solar cells by treating the electron transport layers.

ENERGY & FUELS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Adaption of MAPbI3 perovskite with copper phthalocyanine inorganic hole transport layer via nitrosonium tetrafluoroborate additive to enhance performance and stability of perovskite solar cells

Mustafa K. A. Mohammed et al.

Summary: Dopant-free inorganic hole transport materials show high resistance and potential for commercialization of perovskite-based solar cells. Introducing NOBF4 as an additive improves efficiency and air stability of the solar cells.

OPTICAL MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Electronic, structural, and optical properties of Cs2SnGeX6 (X = I, Br, Cl) and mixed halides for solar cell applications

D. Bharath Raja et al.

Summary: The Cs2SnGeX6 perovskite with mixed metal-halides exhibits tunable structural and electronic properties, with a broad range of bandgap by substituting various halides. It shows ambipolar transport behavior and has long charge carrier diffusion lengths. The predominant bonding nature is ionic between cesium and halogen atoms, while bonding between tin/germanium and halogen atoms is covalent. The materials have high mobility of charge carriers due to the presence of stereochemically-active lone-pair electrons in Sn and Ge. The major optical absorption is attributed to the transition between hybridized Sn/Ge(s)-X(p) and Sn/Ge(p) states. These properties make the materials suitable for solar cell applications.

SOLAR ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Organic-Free and Lead-Free Perovskite Solar Cells with Efficiency over 11%

Weihai Zhang et al.

Summary: Highly efficient CsSnI3-xBrx compositional perovskite-based PSCs are achieved using DMKO as a multifunctional additive. DMKO acts as a deoxidant, neutralizing oxygen molecules and reducing Sn4+ back to Sn2+, enhancing the oxidation resistance of the film. The oxime group in DMKO interacts with Sn2+ ions, inhibiting defect formation and resulting in films with low defect density.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Introduction of cadmium chloride additive to improve the performance and stability of perovskite solar cells

Mustafa K. A. Mohammed et al.

Summary: Using cadmium chloride as an additive improves the properties and stability of perovskite solar cells, leading to higher power conversion efficiency.

RSC ADVANCES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Passivation Strategy on Sn Related Defects for High Performance All-Inorganic CsSnI3 Perovskite Solar Cells

Bo Li et al.

Summary: This study utilized a thioamides passivation strategy to modulate defect state density at surfaces and grain boundaries in CsSnI3 perovskites, achieving high-performance all-inorganic CsSnI3 PSCs. Surface passivation reduced deep level trap state defect density originating from Sn2+ ion and Sn2+ oxidation, restraining nonradiative recombination and elongating carrier lifetime.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Poly(N,N′-bis-4-butylphenyl-N,N′-bisphenyl)benzidine-Based Interfacial Passivation Strategy Promoting Efficiency and Operational Stability of Perovskite Solar Cells in Regular Architecture

Erdi Akman et al.

Summary: The study addresses the issue of degradation in perovskite solar cells (PSCs) over time, caused by environmental factors such as humidity, heat, and light. By treating the perovskite surfaces with polyTPD molecules, the research significantly suppresses defect-mediated non-radiative recombination in PSCs, resulting in improved efficiency and stability. The ultra-hydrophobic polyTPD passivant also helps to prevent moisture penetration, leading to a high retention of initial efficiencies after storage and operational conditions.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Physics, Condensed Matter

Numerical simulation of highly efficient lead-free perovskite layers for the application of all-perovskite multi junction solar cell

Neelima Singh et al.

Summary: The numerical simulation demonstrated that CsSnGeI3-based perovskite solar cells exhibit better photovoltaic performance compared to CH3NH3GeI3-based cells. Factors such as hole transport layer, defect density, metal work function, and temperature were found to influence the device performance. Matching the current of the two perovskite layers is crucial for all-perovskite multi junction solar cells.

SUPERLATTICES AND MICROSTRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of silver-PC61BM composite electron transport layer in methylammonium lead iodide solar cell

Arul Varman Kesavan et al.

Summary: Improving light absorption in the photoactive layer is crucial for achieving high efficiency in photovoltaics. Metal nanoparticles, such as silver nanoparticles (AgNPs), can be utilized to enhance light absorption and reduce series resistance and sheet resistance in photovoltaic devices.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Optics

Numerical study of lead free CsSn0.5Ge0.5I3 perovskite solar cell by SCAPS-1D

Milimo Amos Nalianya et al.

Summary: This study focuses on the design and analysis of CsSnGeI3 as a competitive lead-free perovskite, achieving high efficiency by optimizing material parameters and fabrication processes.

OPTIK (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Anti-solvent engineering via potassium bromide additive for highly efficient and stable perovskite solar cells

Sadeer M. Majeed et al.

Summary: The study demonstrates the use of KBr additive in CB anti-solvent engineering to enhance perovskite quality in triple-cation perovskite solar cells, leading to improved crystallinity, passivation of surface defects, suppressed nonradiative recombination, and facilitated charge extraction. Additionally, the hysteresis behavior in the perovskite layer was suppressed due to halide vacancies filling with K+ ions.

ORGANIC ELECTRONICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A facile approach to improve the performance and stability of perovskite solar cells via FA/MA precursor temperature controlling in sequential deposition fabrication

Mohanad D. Humadi et al.

Summary: Optimizing the pre-heating temperature can lead to higher efficiency and stability in the fabrication of hybrid perovskite solar cells.

OPTICAL MATERIALS (2021)

添加到收藏夹

Article Optics

Performance analysis of cesium formamidinium lead mixed halide based perovskite solar cell with MoOx as hole transport material via SCAPS-1D

Farihatun Jannat et al.

Summary: Cesium formamidinium lead mixed halide perovskite solar cells show potential for high efficiency, with molybdenum oxide as a favorable hole transport material. This combination may contribute to the design of efficient perovskite-perovskite tandem or triple junction configurations for solar cells.

OPTIK (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Device simulation of highly efficient eco-friendly CH3NH3SnI3 perovskite solar cell

Piyush K. Patel

Summary: The study focused on optimizing the performance of a photoexcited lead-free perovskite solar cell device through simulation, determining an appropriate absorber layer thickness and treatment method to achieve a higher power conversion efficiency.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Chemistry, Physical

Localized Electron Density Engineering for Stabilized B-γ CsSnI3-Based Perovskite Solar Cells with Efficiencies >10%

Tao Ye et al.

Summary: The undesirable oxidation in CsSnI3 is restricted by engineering the localized electron density with phthalimide (PTM) additive, resulting in reduced defect density and relatively grain-ordered perovskite film. Champion efficiencies are obtained for modified rigid and flexible B-gamma CsSnI3-based PSCs, and the encapsulated devices exhibit high stability under various conditions.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Comparative Study on the Performance of Different Lead-Based and Lead-Free Perovskite Solar Cells

K. Deepthi Jayan et al.

Summary: The study found that SnO is a better substitute for TiO2 as an electron transport material for the two different absorber layer materials, and NiO and CuO provide higher power conversion efficiency. The low-cost back-contact metal Pd offers better performance for MAGeI(3)-based PSCs.

ADVANCED THEORY AND SIMULATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Long-term stable and hysteresis-free planar perovskite solar cells using green antisolvent strategy

Duha S. Ahmed et al.

Summary: The inclusion of green EA antisolvent treatment in the fabrication of PSCs has been shown to enhance optoelectronic properties, morphology, and charge transfer while suppressing interfacial recombination, resulting in a significant boost in power conversion efficiency.

JOURNAL OF MATERIALS SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Effect of 2D perovskite layer and multivalent defect on the performance of 3D/2D bilayered perovskite solar cells through computational simulation studies

Anjan Kumar et al.

Summary: This research explores the potential of mixed-dimensional perovskite solar cells in achieving long-term stability and high performance. A simulation-based study on a novel device structure reveals the significant impact of the thickness of the 2D perovskite layer on the solar cell parameters. The findings highlight the importance of addressing multivalent defects in the 3D perovskite layer and their impact on overall efficiency.

SOLAR ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Composition engineering of operationally stable CsPbI2Br perovskite solar cells with a record efficiency over 17%

Teoman Ozturk et al.

Summary: The study presents a method of tuning CsPbI2Br crystallization by incorporating FeCl2 into the perovskite precursor. The introduction of FeCl2 stabilizes the crystal phase, improves efficiency and stability of the photovoltaic devices.

NANO ENERGY (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review on the classification of organic/inorganic/carbonaceous hole transporting materials for perovskite solar cell application

Selvakumar Pitchaiya et al.

ARABIAN JOURNAL OF CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

ZnO/Ag NANOPARTICLE-DECORATED SINGLE-WALLED CARBON NANOTUBES (SWCNTs) AND THEIR PROPERTIES

Mohammad R. Mohammad et al.

SURFACE REVIEW AND LETTERS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dimension-Controlled Growth of Antimony-Based Perovskite-like Halides for Lead-Free and Semitransparent Photovoltaics

Yi Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Energy & Fuels

Tailoring optoelectronic properties of CH3NH3PbI3 perovskite photovoltaics using al nanoparticle modified PC61BM layer

Arul Varman Kesavan et al.

SOLAR ENERGY (2020)

添加到收藏夹

Review Chemistry, Physical

Inorganic Halide Perovskite Solar Cells: Progress and Challenges

Jingjing Tian et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Engineered surface properties of MAPI using different antisolvents for hole transport layer-free perovskite solar cell (HTL-free PSC)

Ali K. Al-Mousoi et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Engineered electronic properties of the spin-coated MAPI for hole-transport-free perovskite solar cell (HT-free PSC): Spinning time and PSC performance relationship

Mustafa K. A. Mohammed et al.

CHEMICAL PHYSICS LETTERS (2020)

添加到收藏夹

Article Energy & Fuels

Experimental and SCAPS simulated formamidinium perovskite solar cells: A comparison of device performance

S. Karthick et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Optics

Device modelling of non-fullerene organic solar cell with inorganic CuI hole transport layer using SCAPS 1-D

K. S. Nithya et al.

OPTIK (2020)

添加到收藏夹

Article Chemistry, Physical

CuSCN as Hole Transport Material with 3D/2D Perovskite Solar Cells

Vinod E. Madhavan et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Prospects for low-toxicity lead-free perovskite solar cells

Weijun Ke et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Physics, Condensed Matter

Performance evaluation and material parameter perspective of eco-friendly highly efficient CsSnGeI3 perovskite solar cell

Raghvendra et al.

SUPERLATTICES AND MICROSTRUCTURES (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Unleaded Perovskites: Status Quo and Future Prospects of Tin-Based Perovskite Solar Cells

Weijun Ke et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A modeled perovskite solar cell structure with a Cu2O hole-transporting layer enabling over 20% efficiency by low-cost low-temperature processing

Lingyan Lin et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation

Min Chen et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Temperature Variation-Induced Performance Decline of Perovskite Solar Cells

Jonas A. Schwenzer et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Energy & Fuels

Quantifying energy losses in planar perovskite solar cells

Yun Da et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Long Minority-Carrier Diffusion Length and Low Surface-Recombination Velocity in Inorganic Lead-Free CsSnI3 Perovskite Crystal for Solar Cells

Bo Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Native Defect-Induced Hysteresis Behavior in Organolead Iodide Perovskite Solar Cells

Hui Yu et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

添加到收藏夹

Article Physics, Multidisciplinary

Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency

Hui-Jing Du et al.

CHINESE PHYSICS B (2016)

添加到收藏夹

Article Chemistry, Physical

Toward Lead-Free Perovskite Solar Cells

Feliciano Giustino et al.

ACS ENERGY LETTERS (2016)

添加到收藏夹

Article Energy & Fuels

Enhanced stability and efficiency in hole-transport-layer-free CsSnI3 perovskite photovoltaics

K. P. Marshall et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Towards printed perovskite solar cells with cuprous oxide hole transporting layers: a theoretical design

Yan Wang et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anomalous Band Gap Behavior in Mixed Sn and Pb Perovskites Enables Broadening of Absorption Spectrum in Solar Cells

Feng Hao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

添加到收藏夹

Article Optics

Lead-free solid-state organic-inorganic halide perovskite solar cells

Feng Hao et al.

NATURE PHOTONICS (2014)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties

Constantinos C. Stoumpos et al.

INORGANIC CHEMISTRY (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

CsSnI3: Semiconductor or Metal? High Electrical Conductivity and Strong Near-Infrared Photoluminescence from a Single Material. High Hole Mobility and Phase-Transitions

In Chung et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

添加到收藏夹

Article Multidisciplinary Sciences

All-solid-state dye-sensitized solar cells with high efficiency

In Chung et al.

NATURE (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.