☆ 4.7 Article

Experimental study on photovoltaic panels integrated with metal matrix sheets and bio-based phase change materials

ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Optimization of thermal and electrical efficiencies of a photovoltaic module using combined PCMs with a thermo-conductive filler

Neda Azimi et al.

Summary: The study aims to optimize the thermal and electrical efficiencies of a photovoltaic module by using PCMs and a thermo-conductive filler. Composites of BWCO and PBWCO are investigated, with the addition of TPA to enhance thermal conductivity. Through experimentation and analysis, the study ultimately achieves higher electrical and thermal efficiencies at the optimal conditions.

SOLAR ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Role of phase change materials thickness for photovoltaic thermal management

Ammar Naseer et al.

Summary: This study investigates the performance of PV panels by varying the thickness of hybrid PCMs, finding that configurations with more low melting point PCM show better performance, with configuration D showing the best electrical power and efficiency.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2022)

添加到收藏夹

Article Thermodynamics

Enhancing the thermal performance of a photovoltaic panel using nano-graphite/paraffin composite as phase change material

Zakie Rostami et al.

Summary: This study investigates the use of a nano-graphite/paraffin composite to enhance the cooling performance of a PV panel, reducing thermal stresses and current mismatches, leading to a significant increase in output power. By increasing water flow rate, the surface temperature of the PV panel is reduced, with an average surface temperature decrease of around 26 degrees.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Using high-frequency ultrasonic and thermoelectric generators to enhance the performance of a photovoltaic module

Pedram Azimi et al.

Summary: This study utilizes ultrasonic and thermoelectric generators to cool down a photovoltaic module and enhance its performance. The findings demonstrate that the hybrid cooling system of TEGs and ultrasonic significantly reduces the module temperature and increases its output power. Additionally, selecting the parameters of the cooling system appropriately can further boost the electrical efficiency of the photovoltaic module.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Review Energy & Fuels

Phase change materials based on nanoparticles for enhancing the performance of solar photovoltaic panels: A review

Hussein M. Maghrabie et al.

Summary: This paper introduces the importance and application of phase change materials (PCM) in thermal energy storage systems, and proposes a method of improving PCM thermal conductivity by adding nanoparticles. The study results show that nano-enhanced phase change materials (NePCM) have superior heat transfer characteristics, and have the potential for cooling photovoltaic cells.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation on thermal management of a photovoltaic module using water-jet impingement cooling

Mohammad Javidan et al.

Summary: This study investigated the indoor cooling of photovoltaic modules using a multi-nozzle jet impingement cooling system. Results showed that an increase in liquid mass flow rate and optimal design of the JIC system can improve the electrical efficiency of PV modules, reduce operating temperature, and maintain temperature uniformity.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Increasing the electrical efficiency and thermal management of a photovoltaic module using expanded graphite (EG)/paraffin-beef tallow-coconut oil composite as phase change material

Babak Karami et al.

Summary: This study utilized a composite PCM of paraffin with beef tallow/coconut oil mixture to enhance heat removal from a PV module surface. By adding expanded graphite powders to the composite, optimal parameters were determined to improve thermal conductivity and increase output power for the PV system. The results demonstrated that the composite with the specified composition was more efficient in heat regulation, while the addition of EG particles provided significant added benefits.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Efficient thermal management of the photovoltaic/phase change material system with innovative exterior metal-foam layer

Jasim M. Mahdi et al.

Summary: This research introduces an innovative configuration for modifying the thermal management system of PV panels, which integrates a phase-change material (PCM) with an exterior metal-foam layer. The inclusion of the foam layer increases PCM melting time and extends the thermal management duration of PV panels. Numerical simulations reveal the effects of PCM thickness, PV tilt angle, and the foam layer on system performance.

SOLAR ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of photovoltaic hybrid cooling system performance using the thermoelectric generator and RT25 Phase change material

H. Metwally et al.

Summary: The study developed two cooling models for photovoltaic panels, which are active and hybrid cooling systems. These systems have shown improvement in efficiency and power generation capabilities in various weather conditions.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of a hybrid photovoltaic and thermal solar energy collector with integrated phase change material (PVT-PCM) in comparison with a traditional photovoltaic (PV) module

Mauricio Carmona et al.

Summary: A novel thermal energy storage and recovery system was proposed to improve the overall efficiency of solar energy collectors by integrating a phase change material in a hybrid module. Experimental comparisons showed that the daily electrical efficiency of the hybrid PVT-PCM module increased by 7.43% compared to the traditional PV module, resulting in a total increase of 20.45% in the capability to extract useful energy from the sun.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Performance augmentation of solar photovoltaic panel through PCM integrated natural water circulation cooling technique

P. Sudhakar et al.

Summary: This study investigates the use of phase change material (PCM) and natural water cooling system for effective thermal management of solar photovoltaic (PV) panels. Experimental results showed that the top to bottom continuous water supply cooling technique significantly improved the performance of the PV panel.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

A novel thermal regulation method for photovoltaic panels using porous metals filled with phase change material and nanoparticle additives

Abdulmunem R. Abdulmunem et al.

Summary: The study shows that adding multi-walled carbon nanotubes can significantly improve the thermal properties of materials in PV panels, thereby enhancing the electrical performance of the cells and increasing power generation efficiency.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Thermal management of photovoltaic module with metal matrix embedded PCM

D. M. C. Shastry et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Evaluation of the nanofluid and nano-PCM based photovoltaic thermal (PVT) system: An experimental study

Ali H. A. Al-Waeli et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Energy & Fuels

Experimental investigation of water based photovoltaic/thermal (PV/T) system with and without phase change material (PCM)

Sajan Preet et al.

SOLAR ENERGY (2017)

添加到收藏夹

Proceedings Paper Energy & Fuels

Thermal energy storage with phase change materials to increase the efficiency of solar photovoltaic modules

Torsten Klemm et al.

11TH INTERNATIONAL RENEWABLE ENERGY STORAGE CONFERENCE, IRES 2017 (2017)

添加到收藏夹

Article Thermodynamics

Water spray cooling technique applied on a photovoltaic panel: The performance response

S. Nizetic et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.