☆ 4.7 Article

A compact and lightweight hybrid liquid cooling system coupling with Z-type cold plates and PCM composite for battery thermal management

ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Experimental study on the thermal management performance of phase change material module for the large format prismatic lithium-ion battery

Zhizuan Zhou et al.

Summary: The study found that the cooling efficiency of PCM on prismatic lithium-ion batteries is influenced by factors such as PCM structure, phase change temperature, and thickness. Experimental results showed that optimizing PCM structure and phase change temperature can improve cooling performance, while PCM thickness also plays a significant role in cooling efficiency.

ENERGY (2022)

添加到收藏夹

Review Thermodynamics

A review on thermal management of lithium-ion batteries for electric vehicles

Xinghui Zhang et al.

Summary: Electric vehicles powered by lithium-ion batteries have great potential in alleviating energy and environmental issues, but temperature management is crucial for their development and propagation. Both high and low temperature environments can negatively impact battery performance and safety, requiring proper handling.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Canopy-to-canopy liquid cooling for the thermal management of lithium-ion batteries, a constructal approach

Sahin Gungor et al.

Summary: A liquid cooling system based on constructal canopy-to-canopy architectures is proposed for efficient thermal management of electric vehicle battery packs. The system can effectively extract the non-uniformly generated heat by the battery cell during the discharging phase. The configuration of the cooling solution is predicted following the constructal methodology, leading to the choice of the hydraulic diameter ratios.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Structure optimization of a heat pipe-cooling battery thermal management system based on fuzzy grey relational analysis

Linfeng He et al.

Summary: A battery thermal management system based on heat pipes combined with a liquid-cooling plate is proposed and evaluated using numerical simulations. Results show that the covering angle of aluminum sheet to battery has the most influential impact on the system cooling performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Exergoeconomic assessment of the ejector-based battery thermal management system for electric and hybrid-electric vehicles

Yousif M. Alkhulaifi et al.

Summary: This paper compares the performance of an ejector-based battery thermal management system (BTMS) to a basic system from thermal and exergoeconomic perspectives. The results show that the ejector-based system has a lower total cost rate and energy consumption, demonstrating its technical and economic feasibility for thermal management in electric and hybrid electric vehicles.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Boundary conditions for Onboard thermal-management system of a battery pack under ultrafast charging

Xiaogang Wu et al.

Summary: This study aims to investigate the boundary conditions of a battery liquid-cooling system under ultrafast charging, to address the issues of overheating and temperature inconsistency during the charging process. By analyzing battery parameters and designing a liquid-cooling system for experimental validation, the results demonstrate that the cooling system can effectively control the temperature of the battery pack, keeping it within a safe range.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Bidirectional symmetrical parallel mini-channel cold plate for energy efficient cooling of large battery packs

Yiming Chen et al.

Summary: This paper introduces the design of a parallel mini-channel cold plate for large battery packs, which effectively reduces the temperature difference in the battery packs and the energy consumption of the system. The results show significant improvement in cooling and energy saving performance.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Performance comparison between straight channel cold plate and inclined channel cold plate for thermal management of a prismatic LiFePO4 battery

Yuntian Zhang et al.

Summary: In this study, an inclined channel cold plate was designed for a LiFePO4 battery in an electric vehicle, and its performance was compared with that of a straight channel cold plate under different conditions. The results showed that the inclined channel cold plate outperformed the straight channel cold plate, and the performance improved with a larger inclined angle. This study suggests that the inclined channel cold plate is more suitable for battery thermal management systems.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Experimental study on thermal behavior of PCM-module coupled with various cooling strategies under different temperatures and protocols

Jingwen Weng et al.

Summary: PCM cooling strategies in BTMS were studied under different protocols and ambient temperatures, showing weaker performance in constant-current mode and higher temperatures. A novel PCM cooling structure coupling copper-plate-enhanced heat pipe with PCM was proposed to improve secondary heat dissipation.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Topology optimization of cooling plates for battery thermal management

Xiaobao Mo et al.

Summary: A novel cooling plate was designed using the topology optimization method in this study, and numerical analysis showed significant improvements in reducing pressure drop and maximum temperature compared to traditional cooling plates. This approach could be considered as a high-efficiency method for battery thermal management.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance enhancement of phase change material heat sinks for thermal management of electronic devices under constant and intermittent power loads

Huizhu Yang et al.

Summary: The study demonstrates the effectiveness of metal fin-enhanced phase change material (PCM) in cooling electronic devices, with significant improvements in operation time and peak temperature reduction. The performance of PCM-filled heat sinks varies under different operating modes and heat transfer conditions, showing tradeoff effects of PCM in forced convection cooling.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Avoiding thermal runaway propagation of lithium-ion battery modules by using hybrid phase change material and liquid cooling

Wencan Zhang et al.

Summary: This paper introduces a novel hybrid battery thermal management system based on phase change material (PCM) and liquid cooling, which utilizes PCM for maintaining operating temperature of the battery and liquid cooling system for preventing thermal runaway propagation. Numerical analysis shows that the system can meet heat dissipation demand under extreme operating conditions.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Structural design of a composite board/heat pipe based on the coupled electro-chemical-thermal model in battery thermal management system

Xianrong Jin et al.

Summary: The study on a three-dimensional battery thermal management system (BTMS) based on the electrochemical-thermal coupled model demonstrates that the system combining composite board and heat pipes is more effective in improving heat performances than a system with only a composite board. Additionally, a BTMS with a combination of vertical and horizontal pipes achieves a higher comprehensive cooling efficiency compared to a system with single pipes. The optimal arrays significantly enhance the performance of the traditional composite board thermal management system.

ENERGY (2021)

添加到收藏夹

Article Thermodynamics

A novel battery thermal management system using nano-enhanced phase change materials

Ravindra Jilte et al.

Summary: The study introduces a novel modified battery module configuration using two-layer nanoparticle enhanced phase change materials, which shows better cooling performance for Li-ion cells in electric vehicles. The arrangement of m x n x p maintains cell temperature below 46 degrees C even at a hot ambient temperature of 40 degrees C, indicating the potential of the proposed system for efficient battery thermal management.

ENERGY (2021)

添加到收藏夹

Article Thermodynamics

A novel liquid cooling plate concept for thermal management of lithium-ion batteries in electric vehicles

Mohsen Akbarzadeh et al.

Summary: This paper presents an innovative liquid cooling plate (LCP) embedded with phase change material (PCM) for thermal management of electric vehicle (EV) batteries. The hybrid LCP, combining active and passive cooling methods, is 36% lighter than traditional aluminum LCP and provides heating solution to slow temperature loss. Experimental and computational analyses show that the hybrid LCP reduces energy consumption and improves temperature uniformity, making it a promising thermal management solution for EVs.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

A parametric study of a hybrid battery thermal management system that couples PCM/copper foam composite with helical liquid channel cooling

Huaqiang Liu et al.

Summary: A hybrid system combining PCM/copper foam with helical liquid channels was proposed and investigated numerically, showing more than 30 K temperature drop compared to natural convection. Various factors such as helical pitch, diameter, tube number, flow velocity, foam porosity, and pore density were studied to optimize battery temperature control.

ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Investigation on battery thermal management system combining phase changed material and liquid cooling considering non-uniform heat generation of battery

Ping Ping et al.

Summary: A novel coupled thermal management system with phase change material (PCM) and liquid pipe was proposed and numerically investigated for maintaining the working temperature of a lithium-ion battery in the desired range under harsh conditions. The system exhibited good cooling performance, suppressing the maximum temperature and temperature difference of the battery pack, and effectively removing heat stored in PCM. Properly adjusting coolant velocity during charging was found to be feasible in saving power consumption while maintaining cooling capacity.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Experimental investigation of thermal performance of novel cold plate design used in a Li-ion pouch-type battery

Orhan Kalkan et al.

Summary: The study investigated the thermal performance of water-cooled cold plates used in thermal management of batteries for electric vehicles. It found that lower coolant inlet temperature has a significant impact on battery surface temperature, while the use of mini channel cold plate resulted in a significant reduction in battery surface temperature and improved temperature homogeneity.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

A delayed cooling system coupling composite phase change material and nano phase change material emulsion

Jiahao Cao et al.

Summary: A delayed cooling system coupling composite phase change material (CPCM) and nano phase change material emulsion (NPCME) is proposed to improve the working performance of lithium-ion batteries under long-term charge-discharge cycles. The system offers better cooling performance than conventional systems, significantly reduces power consumption, and maintains stable battery temperatures and temperature differences without sacrificing cooling performance.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

A novel electric vehicle thermal management system based on cooling and heating of batteries by refrigerant

Jian Guo et al.

Summary: The proposed refrigerant-based thermal management system efficiently solves the conflict between cabin thermal comfort and battery thermal safety for electric vehicles. Mathematical simulations have been conducted to investigate the system's performance under different climate conditions.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Energy & Fuels

Experimental and numerical investigation of the LiFePO4 battery cooling by natural convection

Orhan Kalkan et al.

Summary: The thermal performance of a LiFePO4 pouch type battery under different discharge rates was experimentally and numerically investigated. It was found that natural convection cooling is not sufficient for the battery at high discharge rates.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Construction of effective symmetrical air-cooled system for battery thermal management

Kai Chen et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Hybrid thermal management of a Li-ion battery module with phase change material and cooling water pipes: An experimental investigation

S. Hekmat et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Effective thermal conductivity of high porosity open-cell metal foams

Huizhu Yang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Energy & Fuels

Self-adapting J-type air-based battery thermal management system via model predictive control

Yuanzhi Liu et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

A computational multi-node electro-thermal model for large prismatic lithium-ion batteries

Yu-wei Pan et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Environmental Sciences

Energy efficiency trade-offs in small to large electric vehicles

Martin Weiss et al.

ENVIRONMENTAL SCIENCES EUROPE (2020)

添加到收藏夹

Article Energy & Fuels

Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle

Mohammad Mahdi Heyhat et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Thermal performance of direct two-phase refrigerant cooling for lithium-ion batteries in electric vehicles

Seong Ho Hong et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehicles

Hamidreza Behi et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

Thermal performance enhancement of phase change material using aluminum-mesh grid foil for lithium-capacitor modules

Danial Karimi et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Review Energy & Fuels

Hybrid Battery Thermal Management System in Electrical Vehicles: A Review

Chunyu Zhao et al.

ENERGIES (2020)

添加到收藏夹

Article Thermodynamics

Structural optimization of light-weight battery module based on hybrid liquid cooling with high latent heat PCM

Xiaoyu Wu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Chemistry, Physical

Introducing new designs of minichannel cold plates for the cooling of Lithium-ion batteries

T. Amalesh et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Review Thermodynamics

Review on battery thermal management system for electric vehicles

Jaewan Kim et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: A comprehensive numerical study

Z. Y. Jiang et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Investigating the thermal runaway mechanisms of lithium-ion batteries based on thermal analysis database

Xuning Feng et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Dynamic thermal behavior of micro heat pipe array-air cooling battery thermal management system based on thermal network model

Dan Dan et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

A novel approach for Lithium-ion battery thermal management with streamline shape mini channel cooling plates

Yuqi Huang et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Simulation on cooling performance characteristics of a refrigerant-cooled active thermal management system for lithium ion batteries

Seonggi Park et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Experimental and numerical study on a novel hybrid battery thermal management system integrated forced-air convection and phase change material

Peng Qin et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Energy & Fuels

Design a J-type air-based battery thermal management system through surrogate-based optimization

Yuanzhi Liu et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Investigation of thermal management for lithium-ion pouch battery module based on phase change slurry and mini channel cooling plate

Fanfei Bai et al.

ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Cooling efficiency improvement of air-cooled battery thermal management system through designing the flow pattern

Kai Chen et al.

ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Comparative assessment of new liquid-to-vapor type battery cooling systems

Maan Al-Zareer et al.

ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance of a cylindrical battery module impregnated with PCM composite based on thermoelectric cooling

Le Jiang et al.

ENERGY (2019)

添加到收藏夹

Review Chemistry, Physical

Effects of different phase change material thermal management strategies on the cooling performance of the power lithium ion batteries: A review

Jingwei Chen et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Thermodynamics

Parametric study of forced air cooling strategy for lithium-ion battery pack with staggered arrangement

Zhao Lu et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system

Jiaqiang E et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Thermal management performance of phase change materials with different thermal conductivities for Li-ion battery packs operated at low temperatures

Ziye Ling et al.

ENERGY (2018)

添加到收藏夹

Article Thermodynamics

Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement

Kai Chen et al.

ENERGY (2018)

添加到收藏夹

Article Thermodynamics

Investigation on thermal management performance of PCM-fin structure for Li-ion battery module in high-temperature environment

Ping Ping et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Energy & Fuels

Cold temperature performance of phase change material based battery thermal management systems

Leila Ghadbeigi et al.

ENERGY REPORTS (2018)

添加到收藏夹

Article Thermodynamics

Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system

Weixiong Wu et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Thermodynamics

Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface

Zhonghao Rao et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery

Zichen Wang et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Experimental investigation on EV battery cooling and heating by heat pipes

Q. Wang et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Chemistry, Physical

An investigation of lithium-ion battery thermal management using paraffin/porous-graphite-matrix composite

Angelo Greco et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Physical

Experimental study of a passive thermal management system for high-powered lithium ion batteries using porous metal foam saturated with phase change materials

W. Q. Li et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Thermodynamics

Characteristics of flow distribution in compact parallel flow heat exchangers, part I: Typical inlet header

Chi-Chuan Wang et al.

APPLIED THERMAL ENGINEERING (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.