☆ 4.7 Article

Multi-objective optimization of energy distribution in steel enterprises considering both exergy efficiency and energy cost

ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Two-stage robust optimization approach for flexible oxygen distribution under in iron and steel

Sheng-Long Jiang et al.

Summary: The study developed an optimal oxygen distribution strategy considering uncertain demands and proposed a two-stage robust optimization model to address the balance issue in energy management. The results show that the model is well adapted to solving industrial cases under uncertainty.

APPLIED ENERGY (2022)

添加到收藏夹

Article Construction & Building Technology

Multi-objective optimization of setpoint temperature of thermostats in residential buildings

Hamed Bagheri-Esfeh et al.

Summary: This paper investigates the determination of the optimum setpoint temperature of thermostats in various climates in Iran and proposes a new method based on neural networks and multi-objective optimization algorithms. The results show that the type and thickness of insulation materials have significant impacts on energy consumption, cost, and thermal comfort of occupants in buildings.

ENERGY AND BUILDINGS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Purchased Power Dispatching Potential Evaluation of Steel Plant With Joint Multienergy System and Production Process Optimization

Lei Gan et al.

Summary: In this study, a method for evaluating the dispatching potential of steel plants was proposed through analyzing the flexibility of the production process. By optimizing the energy system and production processes, the optimal dispatching strategy was determined. The results of the study demonstrate the feasibility and effectiveness of the proposed method for energy-system scheduling.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2022)

添加到收藏夹

Article Thermodynamics

Operation scheduling optimization of gas-steam-power conversion systems in iron and steel enterprises

Zhengbiao Hu et al.

Summary: An optimal operation scheduling model for gas-steam-power conversion systems was established in integrated iron and steel enterprises, aiming to reduce both energy operating cost and the start-stop cost of energy conversion equipment. The study found that by optimizing the energy system, the total cost can be significantly reduced and equipment efficiency can be improved.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

A novel evaluation method for energy efficiency of process industry d A case study of typical iron and steel manufacturing process

Hongming Na et al.

Summary: This study proposed an energy efficiency assessment method based on required energy, and analyzed the energy efficiency of typical iron and steel manufacturing process. It identified key factors and solutions for improving energy efficiency in ISMP.

ENERGY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Future CO2 emission trends and radical decarbonization path of iron and steel industry in China

Jialin Shen et al.

Summary: This study examines the potential CO2 emission pathways of China's iron and steel industry under the Paris Agreement framework, proposing four scenarios and emphasizing the need for radical decarbonization to achieve targets. The analysis identifies key factors for carbon neutrality in steel production, establishes a CO2 emission evaluation indicator system, discusses the cost-effectiveness of low-carbon technologies, and explores potential barriers and strategies for hydrogen steelmaking, CCS, and electricity generation structure revolution in the iron and steel industry.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Environmental Sciences

Pareto Optimality and Compromise for Environmental Water Management

Sarah E. Null et al.

Summary: The shape of tradeoffs in water management influences the potential for cooperation and compromise among objectives. Concave tradeoff curves are more conducive to cooperation, while convex curves may lead to more adversarial situations. Understanding and optimizing the mathematical properties of tradeoffs can help identify regions for compromise and reduce conflicts in decision-making processes.

WATER RESOURCES RESEARCH (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

An efficient scheduling approach for an iron-steel plant equipped with self-generation equipment under time-of-use electricity tariffs

Jianhua Cao et al.

Summary: This study addresses an integrated scheduling problem from an iron-steel plant equipped with self-generation equipment under time-of-use electricity tariffs. It develops a multi-objective mathematical model with energy-awareness to optimize production schedules and electricity cost jointly. By using an improved SPEA2 algorithm, the total electricity cost can be significantly reduced, providing high-quality scheduling schemes for energy-intensive industries.

SWARM AND EVOLUTIONARY COMPUTATION (2021)

添加到收藏夹

Article Engineering, Chemical

Real-Time Dynamic Carbon Content Prediction Model for Second Blowing Stage in BOF Based on CBR and LSTM

Maoqiang Gu et al.

Summary: The study introduces a real-time carbon content prediction method for converter steelmaking using case-based reasoning and long short-term memory model, showing improved accuracy in predicting carbon content and outperforming traditional models in actual production data verification.

PROCESSES (2021)

添加到收藏夹

Article Thermodynamics

A MINLP model for multi-period optimization considering couple of gas-steam-electricity and time of use electricity price in steel plant

Ziqing Wei et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Water-energy-carbon nexus assessment of China's iron and steel industry: Case study from plant level

Xiaozhuang Wang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Thermodynamics

Material-energy-emission nexus in the integrated iron and steel industry

Wenqiang Sun et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Thermodynamics

Exergy-based analysis combined with LCA for waste heat recovery in coal-fired CHP plants

Qi Zhang et al.

ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Extended exergy accounting for a typical cement industry in China

Dan Song et al.

ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Exergy return on exergy investment analysis of natural-polymer (Guar-Arabic gum) enhanced oil recovery process

Anas M. Hassan et al.

ENERGY (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energy-saving and emission-reduction technology selection and CO2 emission reduction potential of China's iron and steel industry under energy substitution policy

Xianchun Tan et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Optimal Design Model of the Energy Systems in Iron and Steel Enterprises

Zhengbiao Hu et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Thermodynamics

Exergy analysis of single to triple effect lithium bromide-water vapour absorption cycles and optimization of the operating parameters

Md. Azhar et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Energy & Fuels

Energy and exergy analyses of an integrated iron and steel making process

Qi Zhang et al.

International Journal of Exergy (2018)

添加到收藏夹

Article Thermodynamics

Recent developments and trends in optimization of energy systems

Christos A. Frangopoulos

ENERGY (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of energy use and energy-efficient technologies for the iron and steel industry

Kun He et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Article Energy & Fuels

A MILP model concerning the optimisation of penalty factors for the short-term distribution of byproduct gases produced in the iron and steel making process

Xiancong Zhao et al.

APPLIED ENERGY (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Optimization and Scheduling of Byproduct Gas System in Steel Plant

Jing-hui Yang et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2015)

添加到收藏夹

Article Energy & Fuels

Advances in exergy analysis: a novel assessment of the Extended Exergy Accounting method

M. V. Rocco et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Energy & Fuels

Multi-objective optimization for the design and synthesis of utility systems with emission abatement technology concerns

Xianglong Luo et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

MILP Model for Plant-Wide Optimal By-Product Gas Scheduling in Iron and Steel Industry

Kong Hai-ning et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2010)

添加到收藏夹

Article Thermodynamics

Performances of pulverized coal injection in blowpipe and tuyere at various operational conditions

Shan-Wen Du et al.

ENERGY CONVERSION AND MANAGEMENT (2007)

添加到收藏夹

Article Thermodynamics

Thermoeconomic analysis of power plants: an application to a coal fired electrical generating station

MA Rosen et al.

ENERGY CONVERSION AND MANAGEMENT (2003)

添加到收藏夹

Article Engineering, Chemical

A novel MILP model for plantwide multiperiod optimization of byproduct gas supply system in the iron- and steel-making process

JH Kim et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Exergy analysis of steel production processes

N Shigaki et al.

MATERIALS TRANSACTIONS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.