4.7 Article

Unsymmetrical design and operation in counter-flow microfluidic fuel cell: A prospective study

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Hydrogen generation and utilization in a two-phase flow membraneless microfluidic electrolyzer-fuel cell tandem operation for micropower application

Biswajit Samir De et al.

Summary: The study demonstrates the tandem operation of a membraneless, two-phase flow microfluidic electrolysis cell and fuel cell, which is a step towards developing an independent micropower source. By controlling the flow rate of electrolyte, gas product mixing and crossover can be avoided. The tandem operation of mu EC-mu FC in acidic and alkaline electrolytes shows stable and efficient characteristics.

APPLIED ENERGY (2022)

Article Thermodynamics

Enhanced gas removal and cell performance of a microfluidic fuel cell by a paper separator embedded in the microchannel

Qiao Lan et al.

Summary: By embedding a paper separator in microfluidic fuel cells, the rapid gas removal and low ohmic resistance lead to improved fuel transfer and reduced ohmic loss, enhancing cell performance. Although there is frequent fluctuation in current density due to periodic bubble growth and removal, the fluctuation amplitude decreases with the paper separator present, resulting in better cell performance.

ENERGY (2022)

Review Thermodynamics

A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels

Qidong Xu et al.

Summary: This article comprehensively reviews the electrochemical performances and stabilities of SOFCs operating on various fuels. Although comparable power densities to hydrogen were frequently obtained, degradation problems induced by these fuels influence the long-term stable operation of SOFCs. Potential strategies from three perspectives of thermodynamics, kinetics and structure are proposed to solve degradation issues. The remaining challenges and future prospects of SOFCs fed by each fuel are separately elaborated.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Chemistry, Analytical

Modelling and experimental validation of polarization behavior of airbreathing microfluidic fuel cell using some common fuels: Methanol, ethanol and sodium borohydride

Amit Kumar Rathoure et al.

Summary: Airbreathing microfluidic fuel cell (MFC) holds potential as an energy source for various applications, and the developed mathematical model accurately predicts behavior based on experimental data.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Review Chemistry, Physical

A review of proton exchange membrane fuel cell water management: Membrane electrode assembly

Qingshan Liu et al.

Summary: This article focuses on water management in proton exchange membrane fuel cells (PEMFCs), introducing the latest research and progress on membrane electrode assembly (MEA) components and summarizing the influencing factors on their properties. The properties of each component play a significant role in fuel cell performance, with strong interactions between some properties. Clarifying the influence mechanisms of various properties and their interactions on fuel cell performance is crucial for designing high-performance FCs.

JOURNAL OF POWER SOURCES (2022)

Review Green & Sustainable Science & Technology

Assembly techniques for proton exchange membrane fuel cell stack: A literature review

Ke Song et al.

Summary: Research on assembly theory and techniques for fuel cell stacks is urgently needed to improve efficiency and reduce costs. Current focus is on assembly load, assembly mechanism, and automation, with an emphasis on automation as the future direction of development.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Article Engineering, Environmental

Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Muhammad Bilal Hanif et al.

Summary: Solid oxide fuel cells (SOFCs) hold promise for energy conversion technology, but face challenges such as component degradation and sulfur poisoning. This article discusses various electrode materials and improvements to enhance electrochemical performance, highlighting critical challenges for advancement.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Thermodynamics

A new insight into the effects of agglomerate parameters on internal dynamics of proton exchange membrane fuel cell by an advanced impedance dimension model

Hao Yuan et al.

Summary: This paper proposes a two-dimensional multiphase PEM fuel cell impedance model coupled with an improved electrochemical kinetics model, which can reproduce the measured electrochemical impedance spectroscopy (EIS) under different conditions. The effects of five CCL design parameters on the EIS and critical internal dynamics are comprehensively investigated, offering a deeper understanding of the parameters' impact on PEM fuel cell performance.

ENERGY (2022)

Article Thermodynamics

Evaluation of a fuel cell system designed for unmanned aerial vehicles

Diogo F. M. Santos et al.

Summary: This study examines a commercial fuel cell system designed for unmanned aerial vehicles (UAVs). The system demonstrates high power and efficiency. Energy loss due to unreacted hydrogen and heat generation is identified as the main contributors to efficiency loss. The system also includes a battery as an additional power source.

ENERGY (2022)

Article Chemistry, Physical

Current density distribution in air-breathing microfluidic fuel cells with an array of graphite rod anodes

Bowen Deng et al.

Summary: This study investigates the current density distribution in air-breathing microfluidic fuel cells with an array of graphite rod anodes under different acidic and alkaline conditions. Results show that the performance of the cell is better under alkaline media compared to acidic media, with various current density distributions observed. In acidic media, two-layer anodes far from the cathode exhibit higher current densities at lower current densities, while the reverse occurs at higher current densities. In contrast, under alkaline conditions, the two-layer anodes far from the cathode are consistently the main contributor to the total current density.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Energy & Fuels

A membraneless microfluidic fuel cell with a hollow flow channel and porous flow-through electrodes

Muhammad Tanveer et al.

Summary: A novel flow channel configuration of a membraneless microfluidic fuel cell (MMFC) with porous flow-through electrodes was numerically investigated, showing that a hollow structure in the central flow channel coupled with porous electrodes performed the best in terms of peak power density.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Chemistry, Physical

Discrete-holes film fueling anode heads for high performance air-breathing microfluidic fuel cell

Xun Zhu et al.

Summary: A novel air-breathing microfluidic fuel cell with discrete-holes film fueling anode was developed in this study, introducing the concept of gas film cooling to enhance fuel transfer efficiency. The visualization and verification of annular film flow based on film fueling were conducted using fluorescence microscopy under various flow conditions. The research results provide valuable insights for promoting the practical application of microfluidic fuel cells.

JOURNAL OF POWER SOURCES (2021)

Article Electrochemistry

Dual-electrolyte aluminum/air microfluidic fuel cell with electrolyte-recirculation

Lei Wang et al.

Summary: The Aluminum/air microfluidic fuel cell combines the advantages of co-laminar MFC and aluminum/air batteries, making it a promising device for powering numerous nodes in the Internet of Things ecosystems with high energy density, low cost, membraneless, and miniaturized design. The recirculating dual-electrolyte design in the cell exhibits outstanding performance with an open-circuit voltage of 2.2 V and a short-current density of 1 A cm(-2), benefiting from the regular hierarchical porous carbon paper separator that minimizes electrolyte mixing and facilitates recirculation. This work provides an alternative route for cost-effective and high-performance aluminum/air MFCs towards real applications.

ELECTROCHIMICA ACTA (2021)

Article Thermodynamics

Effect of adding vortex promoter on the performance improvement of active air-cooled proton exchange membrane fuel cells

Ke Song et al.

Summary: A novel method based on the Karman vortex street phenomenon is proposed in this paper for optimizing air-cooled fuel cell cooling, which involves adding a vortex promoter to enhance cooling effect. The simulation results show that the vortex promoter can improve the cooling effect and energy conversion efficiency of the fuel cell, validating the feasibility of optimizing temperature distribution uniformity with different parameters.

ENERGY (2021)

Article Thermodynamics

Effects of the diffusive mixing and self-discharge reactions in microfluidic membraneless vanadium redox flow batteries

Santiago E. Ibanez et al.

Summary: Microfluidic-based membraneless redox flow batteries offer a promising design to eliminate ion-exchange membranes while enhancing proton transfer, despite increased crossover rates of vanadium ions. This study provides estimates for crossover rates induced by diffusion and self-discharge reactions, addressing frozen chemistry and chemical equilibrium scenarios. Analytical expressions offer design guidelines to evaluate capacity fade in these emerging systems.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Review Green & Sustainable Science & Technology

Microfluidic fuel cells with different types of fuels: A prospective review

Yifei Wang et al.

Summary: Microfluidic fuel cells, utilizing microfluidic flows as electrolytes, have shown significant improvements in power output and fuel utilization, with various fuel options being explored. Novel cell designs based on cellulose paper and fabric materials offer promising applications in medical diagnostics, wearable health devices, and smart logistics, despite facing competition from conventional plastic cells due to extra pumping requirements.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Energy & Fuels

Optimization of catalyst layer thickness for achieving high performance and low cost of high temperature proton exchange membrane fuel cell

Lingchao Xia et al.

Summary: This study investigates the impact of catalyst layer (CL) thickness on the performance and cost of high temperature proton exchange membrane fuel cells (HT-PEMFC) by developing a non-isothermal 3D model. The results show that the effective reaction thickness (ERT) of both anode and cathode increases with temperature.

APPLIED ENERGY (2021)

Article Thermodynamics

New insight on the mechanism of vibration effects in vapor-feed microfluidic fuel cell

Tiancheng Ouyang et al.

Summary: Fuel cell technology offers long-term energy storage and instant power generation. Microfluidic fuel cells have a broad application prospect due to small size and high power density, with vibration having a positive but limited effect on vapor-feed microfluidic fuel cells.

ENERGY (2021)

Review Energy & Fuels

Effects of channel geometry and electrode architecture on reactant transportation in membraneless microfluidic fuel cells: A review

Muhammad Tanveer et al.

Summary: This review article focuses on the development of membraneless microfluidic fuel cells, highlighting the microchannel geometry and electrode architecture. It discusses the impact of mixing and depletion regions on performance, as well as the enhancement of mass transfer through effective design of channels and electrodes.
Article Chemistry, Analytical

Self-doped TiO2 nanotube array photoanode for microfluidic all-vanadium photoelectrochemical flow battery

Wei Zhang et al.

Summary: A self-doped TiO2 nanotube array photoanode was developed for a microfluidic all-vanadium photoelectrochemical flow battery to enhance solar energy storage performance. The self-doping extended the light absorption range and the one-dimensional nanotube structure promoted electron transport and separation efficiency, while miniaturization reduced mass transfer resistance. Upgrading light intensity and vanadium ion concentration could further improve photocurrent density and vanadium ion conversion rate.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Article Energy & Fuels

Performance optimization of microfluidic paper fuel-cell with varying cellulose fiber papers as absorbent pad

Lanka Tata Rao et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Article Chemistry, Physical

Enhancing fuel transport in air-breathing microfluidic fuel cells by immersed fuel micro-jet

Yuan Zhou et al.

JOURNAL OF POWER SOURCES (2020)

Article Chemistry, Physical

A novel two-phase model for predicting the bubble formation and performance in microfluidic fuel cells

Tiancheng Ouyang et al.

JOURNAL OF POWER SOURCES (2020)

Article Chemistry, Physical

A direct formate microfluidic fuel cell with cotton thread-based electrodes

Shaolong Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Boosting cell performance and fuel utilization efficiency in a solar assisted methanol microfluidic fuel cell

Y. H. Kwok et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Performance comparison of different configurations of Glucose/O2 microfluidic biofuel cell stack

Ricardo A. Escalona-Villalpando et al.

JOURNAL OF POWER SOURCES (2019)

Article Electrochemistry

Modeling and performance analysis of branched microfluidic fuel cells with high utilization

Omid Babaie Rizvandi et al.

ELECTROCHIMICA ACTA (2019)

Article Thermodynamics

Performance analysis of microfluidic fuel cells with various inlet locations and multiple compartments

Muhammad Tanveer et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Proceedings Paper Energy & Fuels

Ru@Pt core shell nanoparticle on graphene carbon nanotube composite aerogel as a flow through anode for direct methanol microfluidic fuel cell

Y. H. Kwok et al.

PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON APPLIED ENERGY (2017)

Article Chemistry, Physical

Chip-embedded thin film current collector for microfluidic fuel cells

Jin Wook Lee et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Chemistry, Physical

Computational modeling of microfluidic fuel cells with flow-through porous electrodes

Deepak Krishnamurthy et al.

JOURNAL OF POWER SOURCES (2011)

Article Electrochemistry

An alkaline microfluidic fuel cell based on formate and hypochlorite bleach

Erik Kjeang et al.

ELECTROCHIMICA ACTA (2008)

Article Chemistry, Multidisciplinary

A microfluidic fuel cell with flow-through porous electrodes

Erik Kjeang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)