☆ 4.7 Article

Parametric study of cavity on the performance of a hydrogen-fueled micro planar combustor for thermophotovoltaic applications

ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

One zirconia-based ceramic coating strategy of combustion stabilization for fuel-rich flames in a small-scale burner

Fan Li et al.

Summary: Three blended coatings were prepared on stainless steel walls to investigate their effects on fuel-rich methane flame characteristics. Results showed that the Al2O3/ZrO2 coating had the smallest quenching distance and the Y2O3/ZrO2 coating had the highest flame anchoring location. The blended coatings had higher thermal conductivity, expanding stability limits at low temperatures.

FUEL (2022)

添加到收藏夹

Review Energy & Fuels

Influencing factors of wall temperature and flame stability of micro-combustors in micro-thermophotovoltaic and micro-thermoelectric systems

Peng Qian et al.

Summary: Micro-thermophotovoltaic and micro-thermoelectric systems have attracted extensive attention for their compact configuration, no mechanical noise, wide fuel applicability, and high energy density. The focus of research has been on micro-combustors, with concerns about wall temperature and flame stability. Various micro-combustors with different designs have been proposed, but the effects of influential parameters need to be analyzed and summarized for further research.

FUEL (2022)

添加到收藏夹

Article Chemistry, Physical

Effects of injection strategies on thermal performance of a novel micro planar combustor fueled by hydrogen

Wei Zuo et al.

Summary: In this study, a novel micro planar combustor with multi inlets and outlets was designed for thermophotovoltaic applications. The effects of injection strategies on the thermal performance of the combustor fueled by hydrogen were analyzed and discussed. It was found that different injection strategies resulted in different flame patterns and interactions, which had implications on flame stabilization. The study also examined the influence of inlet velocity, hydrogen/air equivalence ratio, and solid wall materials on the thermal performance of the combustor under different injection strategies, and determined the application conditions. This research provides significant insights for micro-thermophotovoltaic applications.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Comprehensive numerical insight the thermal performance improvement of the micro combustors with internal bionic Y-shaped fins for micro-thermal voltaic system applications

Zongguo Xue et al.

Summary: An innovative micro-combustion chamber with internal Y-shaped fins is introduced to enhance the comprehensive thermal performance of the micro thermal voltaic system (MTPV). The results show that the micro-combustion chamber with internal Y-shaped fins exhibits excellent thermal performance. However, an increase in the number of fins leads to a decrease in temperature uniformity and an increase in pressure drop.

FUEL (2022)

添加到收藏夹

Article Chemistry, Physical

Numerical investigations on thermal performance and flame stability of hydrogen-fueled micro tube combustor with injector for thermophotovoltaic applications

Wei Zuo et al.

Summary: This study compares the thermal performance and flame stability of hydrogen-fueled micro tube combustors with backward facing step and with injector. The effects of diameter ratio on thermal performance and flame stability are analyzed and discussed. The results show that decreasing the diameter ratio can improve fluid and heat circulation, but it is not helpful for flame stabilization. However, the injector can enhance the thermal performance and improve flame stability under lower hydrogen/air equivalence ratio.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Numerical investigation of CH4/H2/air flame bifurcations in a micro flow reactor with controlled wall temperature profile

Shixuan Wang et al.

Summary: This study provides a numerical investigation on the flame characteristics of CH4/H-2/air mixture in a cylindrical micro flow reactor with controlled wall temperature distribution. The study reveals complex flame behaviors including bifurcation phenomena in both stable flame regime and FREI regime, and uncovers the underlying mechanisms responsible for these flame phenomena.

COMBUSTION AND FLAME (2022)

添加到收藏夹

Article Energy & Fuels

Thermal and chemical analysis on the hetero-/homogeneous combustion characteristics of H2/Air mixture in a micro channel with catalyst segmentation

Qingbo Lu et al.

Summary: This study investigates the heterogeneous-homogeneous combustion characteristics of premixed H-2/Air mixture in a micro combustor with 2 mm platinum catalyst segmentation through numerical simulation, revealing distinct regions of heterogeneous and homogeneous reaction at high velocities. The introduction of catalytic surface to induce heterogeneous reaction in the catalytic combustor enhances hydrogen conversion rate.

FUEL (2022)

添加到收藏夹

Article Energy & Fuels

Effect of helical fins on the combustion performance in a micro-step combustor

Zheng Zhang et al.

Summary: This study proposed a novel helical-fin-assisted micro-step Helix combustor to improve the performance of micro-combustors under high flow rates. The effects of the helical fins on the flow and combustion characteristics were analyzed and it was found that the helical fins enhance the heat transfer between the flame and fins, resulting in improved combustion efficiency. Choosing different flame stabilization modes for different applications can achieve higher thermal efficiency or combustion efficiency.

FUEL (2022)

添加到收藏夹

Review Chemistry, Applied

A review on the technology development and fundamental research of electrospray combustion of liquid fuel at small-scale

Ningguang Chen et al.

Summary: This paper comprehensively reviews the fundamental understanding and advantages of electrospray combustion technology. It discusses the combustion characteristics of different liquid fuels and the role of catalysts in enhancing combustion. The paper also presents detailed studies on droplet instability, droplet breakup mechanisms, scaling laws, and catalytic combustion. The findings of this review are summarized, and future research directions are proposed.

FUEL PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Entropy production and enhanced thermal performance studies on counter-flow double-channel hydrogen/ammonia-fuelled micro-combustors with different shaped internal threads

He Zhao et al.

Summary: This study presents a numerical analysis of the performances of counterflow double-channel micro-combustors in terms of the first and second laws. The results indicate that the double-channel configuration offers improved uniformity of wall temperature compared to the single channel configuration, with the oval shaped thread configuration achieving the highest wall temperature and uniformity. Increasing the inlet velocity leads to a higher average wall temperature and slightly reduced uniformity. Chemical reaction is found to be the main contributor to entropy generation. Regardless of the thread shapes, the second law efficiency remains just below 0.5. Thread shapes have no significant influence on the combustor exergy. The use of a blended ammonia-hydrogen fuel results in a slightly higher average wall temperature and less uniform wall temperature.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Parametric study of inserting internal spiral fins on the micro combustor performance for thermophotovoltaic systems

Ziqiang He et al.

Summary: With the rapid development of MEMS devices, there is a growing interest in power systems based on micro scale combustion. This study investigates the thermal performance and flame characteristics of micro combustion using three-dimensional models and detailed reaction mechanisms. The findings highlight the significant impact of spiral fins on the energy output of micro thermophotovoltaic systems.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Review Thermodynamics

Critical review of energy storage systems

A. G. Olabi et al.

Summary: This review article critically highlights the latest trends in energy storage applications, discusses several energy storage applications and their future prospects, thoroughly compares different energy storage mediums and their limitations, and analyzes suggestions and solutions to mitigate challenges and improve performance. Further research activities are needed to reduce costs and accelerate commercialization of novel energy storage technologies.

ENERGY (2021)

添加到收藏夹

Article Engineering, Environmental

NOx emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system

Tao Cai et al.

Summary: This study examines the NOx emission characteristics of a premixed micro-combustion system with a perforated plate implemented. The model developed involves a detailed chemical-kinetic mechanism and shows that the flow field, conjugate heat transfer, and preferential diffusion effect play key roles in the NOx emission variation in the recirculation zones.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Thermodynamics

Fuel cell application in the automotive industry and future perspective

A. G. Olabi et al.

Summary: The automotive industry is a significant contributor to global emissions due to its high dependency on fossil fuels. This review discusses the current state, technological advances, and future prospects of fuel cells in the automotive industry, while also addressing factors impeding their advancement and potential solutions. The investigation aims to explore pragmatic approaches to reduce the overall cost of fuel cells and integrate them into the automotive industry.

ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Heat transfer and entropy production evaluation on premixed hydrogen/air-fuelled micro-combustors with internal threads

Siliang Ni et al.

Summary: The proposed micro-combustor with tailored internal threads aims to improve the wall temperature uniformity and enhance the second law efficiency of a micro thermophotovoltaic (MTPV) system. Computational fluid dynamics simulations show that the corrugated thread structures can reduce flame temperature and improve heat transfer significantly. The study also reveals the impact of inlet velocity and nominal diameter on thermal performances of the system.

FUEL (2021)

添加到收藏夹

Article Energy & Fuels

Catalytically stabilized combustion characteristics of methane-air mixtures in micro-scale heat-recirculating systems

Junjie Chen et al.

Summary: The study focused on investigating catalytically stabilized combustion of a methane-air mixture in a micro-scale heat-recirculating system to understand flame stabilization mechanisms and system design insights. The research identified factors for improved flame stability and combustion characteristics, highlighting the importance of catalytic action and heat-recirculating structure.

FUEL (2021)

添加到收藏夹

Article Chemistry, Physical

Numerical study on premixed hydrogen/air combustion characteristics and heat transfer enhancement of micro-combustor embedded with pin fins

Yunfei Yan et al.

Summary: This study focuses on optimizing the structure of micro combustors to improve energy output performance of MTPV systems. Results show that both MCIPF and MCEPF have higher combustion efficiency compared to the conventional MCC, with MCIPF having the highest external wall temperature under different conditions and MCEPF maintaining the best temperature uniformity. The application of high thermal conductivity materials like Aluminum, Red Copper, and Silicon Carbide can enhance external wall temperature and temperature uniformity, providing a new design method for improved heat transfer in micro combustors.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

A novel wavy micro-combustor for micro-thermophotovoltaic applications

Zakaria Mansouri

Summary: A novel micro-combustor with a wavy wall shape is proposed for micro-thermophotovoltaic devices, aiming to improve energy conversion efficiency. Numerical simulations show that the wavy shape increases the combustor efficiency by 8.3% compared to a flat shape. Optimum parameters for better conversion performance are reported.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

添加到收藏夹

Review Energy & Fuels

Recent progress in flame stabilization technologies for combustion-based micro energy and power systems

Jianlong Wan et al.

Summary: This article discusses the development and classification of flame stabilization technologies in micro-combustors, including single flame stabilization technologies, combined flame stabilization technologies, and other technologies. Progress made in the past decade is summarized, along with a discussion on the underlying mechanisms of these flame anchoring strategies.

FUEL (2021)

添加到收藏夹

Article Chemistry, Physical

Enhance the energy and exergy performance of hydrogen combustion by improving the micro-combustor outlet in thermofluidic systems

Salar Mohseni et al.

Summary: This study focuses on improving the exit part of conventional micro-combustors to increase heat transfer efficiency and decrease exhaust gas temperature. By enhancing exhaust gas velocity and increasing heat transfer surface area, the new micro-combustors show reduced exhaust gas temperature and increased wall temperature uniformity. Furthermore, micro combustors with porous media demonstrate the best energy and exergy performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Numerical study on flame shape transition and structure characteristic of premixed CH4/H2-air in the micro-planar combustor

Chen Zhou et al.

Summary: The study found that hydrogen addition in a micro-planar combustor significantly affects flame shape and location, leading to the formation of a U-shaped flame that enhances combustion stability. The findings shed light on the enhanced mechanism of fuel-blended combustion in micro-combustor.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

添加到收藏夹

Article Thermodynamics

Numerical investigations on hydrogen-fueled micro-cylindrical combustors with cavity for micro-thermophotovoltaic applications

Wei Zuo et al.

Summary: The study found that the micro-cylindrical combustor with cavity has better thermal performance compared to the one without cavity. By analyzing the effects of cavity length and depth, the optimal cavity size was determined, and it was concluded that the combustor with cavity has better potential for applications in micro-TPV systems.

ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Heterogeneous reaction and homogeneous flame coupled combustion behavior of n-decane in a partially packed catalytic bed combustor

Weijuan Yang et al.

Summary: Experiments on premixed combustion of n-decane in micro-combustors revealed three combustion modes: homogeneous combustion (HMC), heterogeneous combustion (HTC), and coupled combustion (CC). Coupled combustion showed a wider combustion zone with more uniform temperature distribution, which is significant for applications like thermo-photovoltaic systems.

FUEL (2021)

添加到收藏夹

Article Thermodynamics

Energy and exergy conversion enhancement of a premixed hydrogen-fuelled wavy-combustor for micro-thermophotovolatic application

Lei Han et al.

Summary: This study numerically simulated a wavy-shaped micro-combustor fueled by hydrogen/air and evaluated its thermal performance with detailed chemical-kinetic mechanism. The results showed that the presence of wavy enhanced heat transfer, leading to higher average temperature on outer wall and more uniform temperature distribution in the combustor. The study also found that the equivalence ratio had a significant impact on the average temperature and exergy, while the wavy number and depth affected the radiation energy and exergy non-monotonically.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Multi-factor impact mechanism on combustion efficiency of a hydrogen-fueled micro-cylindrical combustor

Wei Zuo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Numerical investigations on thermal performance enhancement of hydrogen-fueled micro planar combustors with injectors for micro-thermophotovoltaic applications

Wei Zuo et al.

ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Effects of rectangular rib on exergy efficiency of a hydrogen-fueled micro combustor

Qingqing Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Effects of multi-factors on comprehensive performance of a hydrogen-fueled micro-cylindrical combustor by combining grey relational analysis and analysis of variance

Wei Zuo et al.

ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Anomalous blow-off limit of methane-air premixed flame in a micro preheated combustor with a flame holder

Jianlong Wan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Effects of heat transfer on flame stability limits in a planar micro-combustor partially filled with porous medium

Qingqing Li et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

添加到收藏夹

Review Thermodynamics

Micro-power generation using micro-turbine (moving) and thermophotovoltaic (non-moving) systems

Seyed Ehsan Hosseini

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Mitigating self-excited flame pulsating and thermoacoustic oscillations using perforated liners

Dan Zhao et al.

SCIENCE BULLETIN (2019)

添加到收藏夹

Article Thermodynamics

A numerical investigation on the thermo-chemical structures of methane-oxygen diffusion flame-streets in a microchannel

Xin Kang et al.

COMBUSTION AND FLAME (2019)

添加到收藏夹

Article Thermodynamics

Numerical comparison of H2/air catalytic combustion characteristic of micro-combustors with a conventional, slotted or controllable slotted bluff body

Yunfei Yan et al.

ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Investigation of combustion and emission performance of a micro combustor: Effects of bluff body insertion and oxygen enriched combustion conditions

Harun Yilmaz

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

The numerical study of the energy and exergy efficiencies of the micro-combustor by the internal micro-fin for thermophotovoltaic systems

Ebrahim Nadimi et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Characterizing hydrogen-fuelled pulsating combustion on thermodynamic properties of a combustor

Dan Zhao et al.

COMMUNICATIONS PHYSICS (2019)

添加到收藏夹

Article Thermodynamics

Experimental and numerical study of premixed propane/air combustion in the micro-planar combustor with a cross-plate insert

Aikun Tang et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Review Thermodynamics

A review of cavity-based trapped vortex, ultra-compact, high-g, inter-turbine combustors

Dan Zhao et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)

添加到收藏夹

Article Energy & Fuels

Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications

Saad Akhtar et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Numerical investigations on an improved micro-cylindrical combustor with rectangular rib for enhancing heat transfer

Wei Zuo et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation and numerical analysis on the blow-off limits of premixed CH4/air flames in a mesoscale bluff-body combustor

Jianlong Wan et al.

ENERGY (2016)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of the effect of distributed heat sources on heat-to-sound conversion in a T-shaped thermoacoustic system

Dan Zhao et al.

APPLIED ENERGY (2015)

添加到收藏夹

Article Energy & Fuels

A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application

Saad Akhtar et al.

APPLIED ENERGY (2015)

添加到收藏夹

Article Engineering, Environmental

Combustion process and entropy generation in a novel microcombustor with a block insert

Yang Wenming et al.

CHEMICAL ENGINEERING JOURNAL (2015)

添加到收藏夹

Article Engineering, Environmental

Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame

Jianlong Wan et al.

CHEMICAL ENGINEERING JOURNAL (2015)

添加到收藏夹

Article Thermodynamics

Impacts of inner/outer reactor heat recirculation on the characteristic of micro-scale combustion system

Ghobad Bagheri et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Chemistry, Physical

Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates

Aikun Tang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

添加到收藏夹

Article Engineering, Aerospace

Two-dimensional lattice Boltzmann investigation of sound absorption of perforated orifices with different geometric shapes

Chenzhen Ji et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Thermodynamics

Development of micro-thermophotovoltaic power generator with heat recuperation

W. M. Yang et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

添加到收藏夹

Article Thermodynamics

Thermal performance of micro-combustors with baffles for thermophotovoltaic system

Dongyue Jiang et al.

APPLIED THERMAL ENGINEERING (2013)

添加到收藏夹

Article Thermodynamics

Experimental study on premixed CH4/air mixture combustion in micro Swiss-roll combustors

Zhong Bei-Jing et al.

COMBUSTION AND FLAME (2010)

添加到收藏夹

Article Thermodynamics

Thermal performance of a micro-combustor for micro-gas turbine system

H. L. Cao et al.

ENERGY CONVERSION AND MANAGEMENT (2007)

添加到收藏夹

Article Thermodynamics

Microthermophotovoltaics power system for portable mems devices

H Xue et al.

MICROSCALE THERMOPHYSICAL ENGINEERING (2005)

添加到收藏夹

Article Thermodynamics

Combustion in micro-cylindrical combustors with and without a backward facing step

WM Yang et al.

APPLIED THERMAL ENGINEERING (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.