4.5 Review

A Review on Thermal Coupling of Metal Hydride Storage Tanks with Fuel Cells and Electrolyzers

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Bio-inspired leaf-vein type fins for performance enhancement of metal hydride reactors

K. Venkata Krishna et al.

Summary: Metal hydride reactors driven by heat are essential for successful development of metal hydride devices such as H2 storage systems. Nature-inspired leaf-vein type fins have shown good heat transfer capabilities. Optimized designs with inclined fins lead to faster storage capacity attainment, reducing absorption time significantly compared to traditional designs. Operating parameters such as hydrogen supply pressure, inlet temperature, and velocity of the heat transfer fluid greatly influence the performance of the optimized design.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Energy & Fuels

Transient simulation studies on a metal hydride based hydrogen storage reactor with longitudinal fins

Mahvash Afzal et al.

Summary: In this study, a 50 kg LaNi5 based shell and tube type metal hydride hydrogen storage reactor was investigated. The design process for the reactor was presented and its performance analysis was carried out numerically. The study found that the reactor performance was promising under the appropriate operating conditions, with the supply pressure and heat transfer fluid flow rate having little effect on the performance, and the initial bed temperature having no significant impact.

JOURNAL OF ENERGY STORAGE (2022)

Article Thermodynamics

Optimization of the content distribution of expanded natural graphite in a multilayer metal hydride bed for thermochemical heat storage

Zezhi Zhu et al.

Summary: This study utilized a multilayer MH bed configuration and investigated the effect of ENG content gradient on the performance of the MH reactor. By optimizing the distribution of ENG, faster hydrogen absorption and better heat-discharge performance were achieved. The proposed optimization method can be applied to optimize the allocation of high-conductivity materials for transient heat conduction problems.

APPLIED THERMAL ENGINEERING (2022)

Article Thermodynamics

Parametric optimization of coupled fin-metal foam metal hydride bed towards enhanced hydrogen absorption performance of metal hydride hydrogen storage device

Xiao-Shuai Bai et al.

Summary: This study investigates the coupled fin-metal foam metal hydride reactor using a 3D multi-physical model. The results show that the fin-metal foam reactor has lower thermal resistance and improved charging time and hydrogen absorption performance.

ENERGY (2022)

Article Energy & Fuels

Design and analysis of metal hydride reactor embedded with internal copper fins and external water cooling

Sanjay Gupta et al.

Summary: Hydrogen is a viable alternative fuel source with storage being the main challenge. Solid-state storage using metal hydrides is the most efficient method, but requires heat management. This study designed an MH reactor and optimized heat transfer efficiency by using internal copper fins.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Chemistry, Physical

Active disturbance rejection control of metal hydride hydrogen storage

Alicia Li Jen Keow et al.

Summary: This study presents a control system to determine the appropriate mass flow rate of hydrogen produced by a water electrolyzer for maintaining gaseous hydrogen pressure. Both PI and ADRC controllers can reject disturbances, with ADRC excelling in eliminating disturbances produced by the mass flow rate.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Studies on 10kg alloy mass metal hydride based reactor for hydrogen storage

Avik Karmakar et al.

Summary: A 10 kg alloy mass metal hydride reactor was designed with LaNi5 alloy, featuring heat transfer enhancement through embedded cooling tubes and an external water jacket. Parametric studies were conducted to optimize the system's performance, with experiments demonstrating storage capacity and desorption kinetics under various conditions.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Energy & Fuels

Analysis of Heat and Mass Transfer During Charging and Discharging in a Metal Hydride - Phase Change Material Reactor

Swaraj D. Lewis et al.

Summary: This paper presents a study on the heat and mass transfer during charging and discharging processes in a metal hydride reactor equipped with phase change material. By exploring the effects of incorporating metal foam into the PCM and optimizing the heat transfer, hydrogen charging and discharging rates were significantly improved. The research also highlights the limitations posed by the MH powder thermal conductivity on heat transfer and optimizes metal foam morphology for better performance.

JOURNAL OF ENERGY STORAGE (2021)

Article Chemistry, Physical

Design and computational analysis of a metal hydride hydrogen storage system with hexagonal honeycomb based heat transfer enhancements-part A

Mahvash Afzal et al.

Summary: This study conducted design and performance analysis for a 10 kWh metal hydride based hydrogen storage system with distinctive heat transfer enhancements. The system showed improved performance under different operating conditions, achieving up to 90% absorption in 7200 s at optimal conditions. The addition of the heat transfer enhancements significantly enhanced reactor performance with minimal increase in system weight.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Thermodynamics

Optimization of tree-shaped fin structures towards enhanced absorption performance of metal hydride hydrogen storage device: A numerical study

Xiao-Shuai Bai et al.

Summary: The tree-shaped fins introduced to metal hydride reactor significantly improve heat transfer and hydrogen absorption performance, especially when optimized length ratio and angle ratio are considered.

ENERGY (2021)

Article Chemistry, Physical

Enhancement of heat and mass transfer characteristics of metal hydride reactor for hydrogen storage using various nanofluids

Rahul U. Urunkar et al.

Summary: The study demonstrates the feasibility of using nanofluids to enhance the thermal performance of metal hydride reactors, showing that CuO/H2O nanofluid outperforms Al2O3/H2O and MgO/H2O nanofluids in terms of heat transfer rate and hydrogen absorption time.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Alloy selection for multistage metal-hydride hydrogen compressors: A thermodynamic model

E. Math. Gray

Summary: A thermodynamic model is proposed to aid in selecting compatible pairs of hydrogen storage alloys for multi-stage metal-hydride compressors. The model is based on ideal compressor concept with constraints on alloy selection due to thermodynamic characteristics, including pressure hysteresis and plateau slope. Experimentally determined effects such as curved van ?t Hoff line are considered in a case study of a two-stage compressor.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Hydrogen release from a metal hydride tank with phase change material jacket and coiled-tube heat exchanger

Liang Tong et al.

Summary: Hydrogen fuel cells are gaining attention in waterway transportation for developing green ships and reducing greenhouse gas emissions. Metal hydrides are considered for hydrogen storage due to their capacity and safety. This study investigated the heat transfer effects during dehydriding using LaNi5 hydride as the storage material in a reactor.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Chemistry, Physical

Review of metal hydride hydrogen storage thermal management for use in the fuel cell systems

Huy Quoc Nguyen et al.

Summary: This paper comprehensively reviews thermal management solutions for MH hydrogen storage used in fuel cell systems, focusing on heat transfer enhancement techniques and assessment of heat sources. It is recommended that the ETC of the MH bed should be greater than 2 W/mK, and the heat transfer coefficient with heating/cooling media should be in the range of 1000-1200 W/m2K to achieve desired MH's performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Energy & Fuels

Optimization based methodology to design metal hydride reactor for thermal storage application

Saurabh Tiwari et al.

Summary: The study optimized the design parameters of a metal hydride-based thermal energy storage system using Taguchi method and grey relational analysis to achieve maximum performance. By reducing the required number of simulations significantly, the methodology proved to be computationally efficient, resulting in improved system designs and better performance compared to conventional methods.

JOURNAL OF ENERGY STORAGE (2021)

Article Chemistry, Physical

Selection of phase change materials, metal foams and geometries for improving metal hydride performance

Hafsa El Mghari et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Thermal coupling of an open-cathode proton exchange membrane fuel cell with metal hydride canisters: An experimental study

Reza Omrani et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Cyclic behaviors of a novel design of a metal hydride reactor encircled by cascaded phase change materials

Talal Alqahtani et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Complete and reduced models for metal hydride reactor with coiled-tube heat exchanger

Liang Tong et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Thermodynamics

Operational characteristics of metal hydride energy storage system in microgrid

Kuldeep Kumar et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Engineering, Chemical

Parametric optimization and control toward the design of a smart metal hydride refueling system

Gerald S. Ogumerem et al.

AICHE JOURNAL (2019)

Review Chemistry, Physical

Hydrogen energy, economy and storage: Review and recommendation

J. O. Abe et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Analysis of hydrogen storage performance of metal hydride reactor with phase change materials

Hafsa El Mghari et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Energy management of a thermally coupled fuel cell system and metal hydride tank

D. Chabane et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Review Energy & Fuels

A Review of Projected Power-to-Gas Deployment Scenarios

Valerie Eveloy et al.

ENERGIES (2018)

Review Chemistry, Physical

Heat transfer techniques in metal hydride hydrogen storage: A review

Mahvash Afzal et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Experiments on solid state hydrogen storage device with a finned tube heat exchanger

Anurag Singh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Review Materials Science, Multidisciplinary

The use of metal hydrides in fuel cell applications

Mykhaylo V. Lototskyy et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)

Review Materials Science, Multidisciplinary

The use of metal hydrides in fuel cell applications

Mykhaylo V. Lototskyy et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)

Article Thermodynamics

Numerical Simulation of Heat and Mass Transfer during Absorption of Hydrogen in Metal Hydride Tank

A. A. Rabienataj Darzi et al.

HEAT TRANSFER-ASIAN RESEARCH (2017)

Article Thermodynamics

Impact of using a heat transfer fluid pipe in a metal hydride-phase change material tank

S. Mellouli et al.

APPLIED THERMAL ENGINEERING (2017)

Article Automation & Control Systems

Optimal Load Sharing of Hydrogen-Based Microgrids With Hybrid Storage Using Model-Predictive Control

Felix Garcia-Torres et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2016)

Article Chemistry, Physical

Energy Management Strategies in hydrogen Smart-Grids: A laboratory experience

L. Valverde et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Review Chemistry, Physical

A review of mathematical modelling of metal-hydride systems for hydrogen storage applications

S. S. Mohammadshahi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Physical

The use of air as heating agent in hydrogen metal hydride storage coupled with PEM fuel cell

Vasili Borzenko et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Review Chemistry, Physical

Different reactor and heat exchanger configurations for metal hydride hydrogen storage systems - A review

Shahin Shafiee et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Physical

Thermal coupling of PEM fuel cell and metal hydride hydrogen storage using heat pipes

Anggito P. Tetuko et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Physical

Novel fuel cell stack with coupled metal hydride containers

Zhixiang Liu et al.

JOURNAL OF POWER SOURCES (2016)

Proceedings Paper Electrochemistry

Development of a Portable Polymer Electrolyte Membrane Fuel Cell System using Metal Hydride as the Hydrogen Storage Medium

M. W. Davids et al.

POLYMER ELECTROLYTE FUEL CELLS 16 (PEFC 16) (2016)

Article Engineering, Electrical & Electronic

Experimental Hydrogen Plant with Metal Hydrides to Store and Generate Electrical Power

Frank Gonzatti et al.

INTERNATIONAL JOURNAL OF EMERGING ELECTRIC POWER SYSTEMS (2016)

Article Thermodynamics

Numerical study of hydrogen purification using metal hydride reactor with aluminium foam

Konstantin B. Minko et al.

APPLIED THERMAL ENGINEERING (2015)

Article Chemistry, Physical

Numerical comparison of heat-fin- and metal-foam-based hydrogen storage beds during hydrogen charging process

Saad Ferekh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

Assembly design of proton exchange membrane fuel cell stack with stamped metallic bipolar plates

Diankai Qiu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

Enhanced hydrogen storage in accumulative roll bonded Mg-based hybrid

Mohammad Faisal et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

Long-term cycle stability of metal hydride-graphite composites

Mila Dieterich et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Review Chemistry, Physical

Development of Hydrogen Storage Tank Systems Based on Complex Metal Hydrides

Morten B. Ley et al.

MATERIALS (2015)

Article Chemistry, Physical

Effect of measurement parameters on thermodynamic properties of La-based metal hydrides

Vinod Kumar Sharma et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Review Chemistry, Physical

Metal hydride hydrogen compressors: A review

M. V. Lototskyy et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Review Chemistry, Physical

Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells

Linfa Peng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Physical

Coupling and thermal integration of a solid oxide fuel cell with a magnesium hydride tank

Baptiste Delhomme et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Article Chemistry, Physical

Modeling, simulation and experimental set-up of a renewable hydrogen-based domestic microgrid

L. Valverde et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Article Thermodynamics

Tools for designing the cooling system of a proton exchange membrane fuel cell

Ulrich Soupremanien et al.

APPLIED THERMAL ENGINEERING (2012)

Article Chemistry, Physical

System simulation models for on-board hydrogen storage systems

Sudarshan Kumar et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Chemistry, Physical

Optimization of heat exchanger designs in metal hydride based hydrogen storage systems

Mandhapati Raju et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Thermodynamics

Heat and Mass Transfer in Solid State Hydrogen Storage: A Review

S. Srinivasa Murthy

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2012)

Article Chemistry, Physical

Performance of a full-scale hydrogen-storage tank based on complex hydrides

Terry A. Johnson et al.

FARADAY DISCUSSIONS (2011)

Article Electrochemistry

HT-PEM Fuel Cell System with Integrated Complex Metal Hydride Storage Tank

R. Urbanczyk et al.

FUEL CELLS (2011)

Article Chemistry, Physical

An experimental investigation of a PEM fuel cell to supply both heat and power in a solar-hydrogen RAPS system

Bahman Shabani et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

Charging dynamics of metal hydride hydrogen storage bed for small wind hybrid systems

Mandhapati Raju et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

System simulation modeling and heat transfer in sodium alanate based hydrogen storage systems

Mandhapati Raju et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Materials Science, Multidisciplinary

Laves phase hydrogen storage alloys for super-high-pressure metal hydride hydrogen compressors

Guo Xiumei et al.

RARE METALS (2011)

Article Thermodynamics

Active cooling of a metal hydride system for hydrogen storage

Timothee L. Pourpoint et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Article Chemistry, Physical

Development of a compact hydrogen generator from sodium borohydride

S. Galli et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

High-density automotive hydrogen storage with cryogenic capable pressure vessels

Salvador M. Aceves et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

Effects of heat transfer on the sorption kinetics of complex hydride reacting systems

Gustavo A. Lozano et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Article Chemistry, Physical

Thermal integration of a metal hydride storage unit and a PEM fuel cell stack

T. Forde et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Article Chemistry, Physical

Optimization of hydrogen storage in metal-hydride tanks

F. Askri et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Article Chemistry, Physical

Automotive hydrogen storage system using cryo-adsorption on activated carbon

R. K. Ahluwalia et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Article Chemistry, Physical

Dynamics of cryogenic hydrogen storage in insulated pressure vessels for automotive applications

R. K. Ahluwalia et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Chemistry, Physical

Thermal performance of a commercial alkaline water electrolyzer: Experimental study and mathematical modeling

P. M. Dieguez et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Thermodynamics

Heat Transfer Characteristics for Practical Hydrogen Pressure Vessels Being Filled at High Pressure

Peter L. Woodfield et al.

JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY (2008)

Article Chemistry, Physical

Sodium alanate hydrogen storage system for automotive fuel cells

R. K. Ahluwalia

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)

Article Chemistry, Physical

A thermally coupled metal hydride hydrogen storage and fuel cell system

Brendan D. MacDonald et al.

JOURNAL OF POWER SOURCES (2006)

Article Chemistry, Physical

Sn-containing (La,Mm)Ni5-xSnxH5-6 intermetallic hydrides:: thermodynamic, structural and kinetic properties

OY Khyzhun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2003)