☆ 4.5 Review

Spray Cooling as a High-Efficient Thermal Management Solution: A Review

ENERGIES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mathematics, Applied

Hybridized consequence of thermal and concentration convection on peristaltic transport of magneto Powell-Eyring nanofluids in inclined asymmetric channel

Safia Akram et al.

Summary: This study investigates the impact of hybrid twofold diffusivity convection and inclined magnetic field on the peristaltic flow of a Powell-Eyring nanofluids in a slanted asymmetric channel. Mathematical modeling and numerical solutions are used to analyze the behavior of different flow quantities. The study shows that the interaction of nano-sized particles in a nanofluid increases heat transfer rates and affects the temperature and mass concentration of the liquid. Factors such as Brownian motion, Soret number, thermophoresis parameter, and Dufour parameter have significant effects on fluid temperature and nanoparticle fraction.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2023)

添加到收藏夹

Article Mathematics, Applied

Impact of slip boundaries on double diffusivity convection in an asymmetric channel with magneto-tangent hyperbolic nanofluid with peristaltic flow

Khalid Saeed et al.

Summary: This article investigates the impact of slip boundaries on velocity, thermal, and concentration convection in a magneto-tangent hyperbolic nanofluid coated with peristaltic flow. The study utilizes numerical techniques to solve the highly nonlinear equations under slip boundary conditions and graphically illustrates the significance of relevant physical parameters.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2023)

添加到收藏夹

Article Energy & Fuels

Two-phase spray cooling for high ambient temperature data centers: Evaluation of system performance

Ranjith Kandasamy et al.

Summary: The newly developed spray cooled system offers an energy-saving cooling solution for high-performance servers in data centers, showing better performance in heat dissipation. Key operating parameters include spray nozzle flow rate, condenser fan power, and condenser flow rate.

APPLIED ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Study on cooling performance of rapid cooling system based on vacuum spray flash evaporation

Hao Fu et al.

Summary: This study proposes a rapid cooling method based on vacuum spray flash evaporation and demonstrates the feasibility and superiority of this method through comparisons with existing rapid cooling methods. Experimental results show that the vacuum spray flash cooling (VSFC) cools almost six times faster than a freezer. Optimization of operational parameters and analysis of influencing factors are conducted, revealing the characteristics of the beverage cooling process.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Investigation on spray cooling heat transfer performance with different nanoparticles and surfactants

Jun Bao et al.

Summary: The study established an open spray cooling system for experimental purposes and investigated the effects of different nozzles on spray cooling performance, as well as the influence of nanoparticle type, concentration, and surfactants on cooling efficiency. Through experiments, optimal cooling effects were achieved with specific configurations, showing improvements in cooling performance compared to water.

HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Impact of geometrical surface modification on spray cooling heat transfer performance with liquid nitrogen: An experimental investigation

Yunxing Yu et al.

Summary: This study investigated the spray cooling using liquid nitrogen as the coolant. Results showed that the straight-grooved surface significantly improved the spray cooling heat transfer compared to the plain surface, but temperature uniformity was poorer.

CRYOGENICS (2022)

添加到收藏夹

Article Energy & Fuels

Research on spray cooling performance based on battery thermal management

Tingting Wu et al.

Summary: This article theoretically analyzes the heat transfer performance of spray cooling technology to achieve a balance between temperature uniformity and compactness of the battery module. The main factors affecting spray cooling's heat transfer performance are discussed. Experimental results show that spray cooling can achieve higher heat transfer coefficients, provide lower temperature rise, and more uniform temperature distribution, making it an efficient approach for managing heat accumulation in battery modules.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Article Thermodynamics

Prospects of heat transfer approaches to dissipate high heat fluxes: Opportunities and challenges

Khellil Sefiane et al.

Summary: This paper provides a brief discussion of various approaches used to achieve high heat fluxes dissipation, including flow boiling in microchannels, spray cooling, use of nano-fluids, and surface modification. It covers achievements, challenges, and new research directions in these selected techniques, serving as an overview for researchers and engineers in the field.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Experimental study on the spray cooling heat transfer performance and dimensionless correlations for ethylene glycol water solution

Nianyong Zhou et al.

Summary: This paper experimentally studied the heat transfer performance of ethylene glycol spray cooling, and found that the ethylene glycol mass fraction significantly affects the heat transfer performance. The increase of dynamic viscosity and the decrease of specific heat capacity and thermal conductivity are the direct causes of this effect. Meanwhile, an increase in nozzle inlet temperature improves the surface heat transfer coefficient and increases evaporation intensity.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

The effect of key parameter changes on the critical heat flux of spray evaporatively-cooled vibrating surfaces using a single misting nozzle

A. Sarmadian et al.

Summary: A new correlation model is developed to study the combined influences of surface-to-nozzle distance and coolant flow rate on spray evaporative cooling. Experimental measurements and dimensional analysis are used to construct the model. The results show that the distance, vibration amplitudes, and frequencies have varying effects on the critical heat flux. The calibrated model can predict the effect of surface-to-nozzle distance on the critical heat flux with reasonable accuracy.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Transient analysis of cryogenic cooling performance for high-power semiconductor lasers using flash-evaporation spray

Jiameng Tian et al.

Summary: This work conducted an experimental investigation on transient cooling performance using a single-pulsed flash-evaporation spray, providing further insight into phase-change heat transfer on the hot surface. Factors such as the nozzle-to-surface distance and nozzle orifice diameter were found to affect the cooling effect.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Physics, Multidisciplinary

Theoretical investigation of double diffusion convection of six constant Jeffreys nanofluid on waves of peristaltic with induced magnetic field: a bio-nano-engineering model

Safia Akram et al.

Summary: The impact of induced magnetic field and double-diffusive convection on the peristaltic pumping of six constant Jeffreys nanofluids in a tilted asymmetric channel are examined in this research. The study focuses on the mathematical modeling and numerical analysis of the flow characteristics, showing the importance of thermodynamic properties.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effects of Double Diffusive Convection and Inclined Magnetic Field on the Peristaltic Flow of Fourth Grade Nanofluids in a Non-Uniform Channel

Yasir Khan et al.

Summary: This study investigated the impact of double diffusive convection and inclined magnetic field in nanofluids on the peristaltic pumping of fourth grade fluid in non-uniform channels. A mathematical model along with analytical techniques were used to calculate the effects of different physical parameters on flow quantities. Results showed that an increase in Brownian motion led to an increase in nanoparticle density, while an increase in thermophoresis decreased fluid viscosity and lowered the fraction of less dense nanoparticles.

NANOMATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanomaterials effects on induced magnetic field and double-diffusivity convection on peristaltic transport of Prandtl nanofluids in inclined asymmetric channel

Safia Akram et al.

Summary: This study explores the effects of induced magnetic field, thermal and concentration convection on the peristaltic flow of Prandtl nanofluids in an inclined asymmetric channel. Mathematical explanation for Prandtl nanofluids with double-diffusivity convection and induced magnetic field is provided, and numerical technique is used to solve the non-linear differential equations and calculate exact solutions for thermal and concentration. The impact of various physical parameters on flow quantities is shown in graphical results.

NANOMATERIALS AND NANOTECHNOLOGY (2022)

添加到收藏夹

Article Thermodynamics

Hybrid impact of thermal and concentration convection on peristaltic pumping of Prandtl nanofluids in non-uniform inclined channel and magnetic field

Safia Akram et al.

Summary: This study discusses the effects of thermal and concentration convection on the peristaltic transport of Prandtl nanofluids and inclined magnetic field in non-uniform inclined channel. Mathematical modeling of Prandtl nanofluids with inclined magnetic field and double-diffusivity convection is described in detail and solved using numerical techniques to find closed form solutions of nanoparticle, temperature, and concentration. The impact of various physical parameters on peristaltic pumping patterns with double diffusive convection is shown through numerical and graphical results.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Review Energy & Fuels

The Impact of Nanofluids on Droplet/Spray Cooling of a Heated Surface: A Critical Review

Yunus Tansu Aksoy et al.

Summary: Cooling by impinging droplets has been studied for decades, with recent interest focused on the potential heat transfer enhancement using nanofluids. The physical mechanisms behind this enhancement, such as nanofluid rheology and nanoparticle impact dynamics, are still being explored. More research is needed to clarify the mechanism of enhancement in spray cooling using nanofluids.

ENERGIES (2021)

添加到收藏夹

Article Thermodynamics

Correlation models of critical heat flux and associated temperature for spray evaporative cooling of vibrating surfaces

Alireza Sarmadian et al.

Summary: Prediction models have been used to investigate the effects of vibrating surfaces on critical heat flux and temperature in spray evaporative cooling. Experimental data from a copper test-piece inside a spray chamber have been obtained for a wide range of vibration conditions. The predictive models have been calibrated using the measured data to ensure safe operation of thermal management systems.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Nuclear Science & Technology

Multi-nozzle spray cooling of a reactor pressure vessel steel plate for the application of ex-vessel cooling

Satya V. Ravikumar Bandaru et al.

Summary: The study investigated the impact of different angles of the steel surface on the cooling performance of spray cooling. The results showed promising prospects of using a multi-nozzle array system for cooling large surface areas, with higher heat fluxes being safely extracted compared to natural convection cooling.

NUCLEAR ENGINEERING AND DESIGN (2021)

添加到收藏夹

Article Thermodynamics

Performance of air/spray cooling system for large-capacity and high-power-density motors

Haihong Dong et al.

Summary: The paper introduces a new air/spray cooling technology for motors and presents experimental results showing that it can lower the stator coils' temperature and increase the average heat transfer coefficient. Increasing the spray medium mass flow leads to a gradual decrease in stator coils temperature and higher driving force requirements for the system.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Experimental investigation on transpiration cooling using propylene glycol aqueous solution

Fei He et al.

Summary: This study investigates the potential of using additives to modify the properties of liquid coolant in transpiration cooling applications. The addition of propylene glycol (PG) has shown to effectively alleviate negative phenomena such as lowering the freezing point, raising the boiling point, reducing temperature and pressure oscillations, and improving cooling uniformity in comparison to using liquid water.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Thermodynamics

Effect of Nanoparticle Type and Surfactant on Heat Transfer Enhancement in Spray Cooling

Bingxing Wang et al.

JOURNAL OF THERMAL SCIENCE (2020)

添加到收藏夹

Article Thermodynamics

Experimental investigation on heat transfer characteristics of R1336mzz flash spray cooling

Zhiwei Zhang et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Experimental investigation of closed loop spray cooling with micro- and hybrid micro-/nano-engineered surfaces

Rui-Na Xu et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Water soluble polymer added high mass flux spray: A novel approach for the attainment of enhanced heat transfer rate in transition boiling regime

Anita Panda et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Enhanced Spray Cooling Using Micropillar Arrays: A Systematic Study

Sankar Muthukrishnan et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Review Engineering, Aerospace

Review of aerospace-oriented spray cooling technology

Ji-Xiang Wang et al.

PROGRESS IN AEROSPACE SCIENCES (2020)

添加到收藏夹

Article Thermodynamics

Upward-facing multi-nozzle spray cooling experiments for external cooling of reactor pressure vessels

Satya V. Ravikumar Bandaru et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Effects of microstructured surface and mixed surfactants on the heat transfer performance of pulsed spray cooling

Ni Liu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

添加到收藏夹

Article Energy & Fuels

Theoretical Study on Cryogen Spray Cooling in Laser Treatment of Ota's Nevus: Comparison and Optimization of R134a, R404A and R32

Jiameng Tian et al.

ENERGIES (2020)

添加到收藏夹

Article Thermodynamics

Experimental investigation of comprehensive effects of surfactant and inclined mode on spray cooling heat transfer

Ni Liu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

添加到收藏夹

Article Thermodynamics

Experimental study on heat transfer performance of a novel compact spray cooling module

Li-Jia Jiang et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the impact of geometrical surface modification on spray cooling heat transfer performance in the non-boiling regime

Azzam S. Salman et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Heat transfer performance and optimization of a close-loop R410A flash evaporation spray cooling

Yan-Ke Lin et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement due to surface modification in the close-loop R410A flash evaporation spray cooling

Zhi-Fu Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Effects of mixed surfactants on heat transfer performance of pulsed spray cooling

Ni Liu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Spray cooling of hot steel plate using aqueous solution of surfactant and polymer

Samarshi Chakraborty et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)

添加到收藏夹

Article Thermodynamics

Two-phase spray cooling with HFC-134a and HFO-1234yf on practical enhanced surfaces

H. Bostanci et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Thermo-physical properties of Cu-Zn-Al LDH nanofluid and its application in spray cooling

Samarshi Chakraborty et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Enhancement mechanism of high alcohol surfactant on spray cooling: Experimental study

Wei-Wei Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Atomization and surface heat transfer characteristics of cryogen spray cooling with expansion-chambered nozzles

Xin-Sheng Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Review Thermodynamics

Review of pool boiling enhancement with additives and nanofluids

Gangtao Liang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Phenomenon and Mechanism of Spray Cooling on Nanowire Arrayed and Hybrid Micro/Nanostructured Surfaces

Jian-nan Chen et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Mechanical

Effects of spray operating time on spray cooling heat transfer performance and surface hydrophilicity using Al2O3-water nanofluid

Tong-Bou Chang et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Synthesis of Cu-Al LDH nanofluid and its application in spray cooling heat transfer of a hot steel plate

Samarshi Chakraborty et al.

POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Thermodynamics

Parametric effect investigation on surface heat transfer performances during cryogen spray cooling

Jia-Meng Tian et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

A hybrid cooling system combining self-adaptive single-phase mechanically pumped fluid loop and gravity-immune two-phase spray module

Ji-Xiang Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Enhancement of heat transfer rate of high mass flux spray cooling by ethanol-water and ethanol-tween20-water solution at very high initial surface temperature

N. H. Bhatt et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Transient spray cooling: Similarity of dynamic heat flux for different cryogens, nozzles and substrates

Jia-Meng Tian et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Review Thermodynamics

Review of spray cooling - Part 1: Single-phase and nucleate boiling regimes, and critical heat flux

Gangtao Liang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

A critical review of traditional and emerging techniques and fluids for electronics cooling

S. M. Sohel Murshed et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Article Thermodynamics

Heat transfer characteristics during pulsed spray cooling with R404A at different spray distances and back pressures

Zhi-Fu Zhou et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Review Thermodynamics

A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques

Przemyslaw Smakulski et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

An investigation on spray cooling using saline water with experimental verification

M. H. Sadafi et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Thermodynamics

Coupling effect of hypobaric pressure and spray distance on heat transfer dynamics of R134a pulsed flashing spray cooling

Zhi-fu Zhou et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)

添加到收藏夹

Article Thermodynamics

Experimental study on optimal spray parameters of piezoelectric atomizer based spray cooling

Hua Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Heat transfer in jet impingement on a hot steel surface using surfactant based Cu-Al layered double hydroxide nanofluid

A. M. Tiara et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Droplet impact dynamics and transient heat transfer of a micro spray system for power electronics devices

Shou-Shing Hsieh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement of ammonia spray cooling by surface modification

H. Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Nanofluids spray heat transfer enhancement

Shou-Shing Hsieh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Chemistry, Physical

Effect of geometric parameters on spray characteristics of pressure swirl atomizers

Muhammad Rashad et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Spray cooling and flash evaporation cooling: The current development and application

Wen-Long Cheng et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation of large area spray cooling with compact chamber in the non-boiling regime

Wen-Long Cheng et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

An experimental comparison of heat transfer characteristic between R134-a and R22 in spray cooling

Shuangtao Chen et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

添加到收藏夹

Article Thermodynamics

Surface heat transfer characteristics of R404A pulsed spray cooling with an expansion-chambered nozzle for laser dermatology

Rui Wang et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2015)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement using air-atomized spray cooling with water-Al2O3 nanofluid

Satya V. Ravikumar et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

添加到收藏夹

Article Thermodynamics

Surfactant-Based Cu-Water Nanofluid Spray for Heat Transfer Enhancement of High Temperature Steel Surface

Satya V. Ravikumar et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Spray cooling characteristics of nanofluids for electronic power devices

Shou-Shing Hsieh et al.

NANOSCALE RESEARCH LETTERS (2015)

添加到收藏夹

Article Thermodynamics

Effects of titania nanoparticles on heat transfer performance of spray cooling with full cone nozzle

Ampere A. Tseng et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

Mixed-surfactant additives for enhancement of air-atomized spray cooling of a hot steel plate

Satya V. Ravikumar et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)

添加到收藏夹

Article Thermodynamics

Effect of flow rate and subcooling on spray heat transfer on microporous copper surfaces

Suraj Joottu Thiagarajan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Review Thermodynamics

Twenty first century cooling solution: Microchannel heat sinks

Sambhaji T. Kadam et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)

添加到收藏夹

Article Thermodynamics

Effect of the spray cone angle in the spray cooling with R134a

Eduardo Martinez-Galvan et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

添加到收藏夹

Article Thermodynamics

An experimental investigation of heat transfer enhancement by addition of high-alcohol surfactant (HAS) and dissolving salt additive (DSA) in spray cooling

Wenlong Cheng et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

添加到收藏夹

Article Thermodynamics

The effect of surfactants on heat transfer feature of nanofluids

Yimin Xuan et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

添加到收藏夹

Article Thermodynamics

Achievement of ultrafast cooling rate in a hot steel plate by air-atomized spray with different surfactant additives

Satya V. Ravikumar et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

添加到收藏夹

Article Thermodynamics

Experimental study on phase change spray cooling

Yu Hou et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

添加到收藏夹

Article Thermodynamics

An experimental study on pulsed spray cooling with refrigerant R-404a in laser surgery

Zhifu Zhou et al.

APPLIED THERMAL ENGINEERING (2012)

添加到收藏夹

Article Thermodynamics

Aquasar: A hot water cooled data center with direct energy reuse

Severin Zimmermann et al.

ENERGY (2012)

添加到收藏夹

Article Thermodynamics

Spray cooling of plain and copper-foam enhanced surfaces

Augusto G. Ulson de Souza et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2012)

添加到收藏夹

Article Thermodynamics

Heat transfer of spray cooling using alumina/water nanofluids with full cone nozzles

Hana Bellerova et al.

HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

High heat flux spray cooling with ammonia: Investigation of enhanced surfaces for CHF

Huseyin Bostanci et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

EXPERIMENTAL STUDY AND OPTIMIZATION OF AIR ATOMIZED SPRAY WITH SURFACTANT ADDED WATER TO PRODUCE HIGH COOLING RATE

Soumya S. Mohapatra et al.

JOURNAL OF ENHANCED HEAT TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Experimental and theoretical investigation of surface temperature non-uniformity of spray cooling

Wen-Long Cheng et al.

ENERGY (2011)

添加到收藏夹

Article Thermodynamics

Experimental study of impingement spray cooling for high power devices

Z. B. Yan et al.

APPLIED THERMAL ENGINEERING (2010)

添加到收藏夹

Article Thermodynamics

Experimental study on the effects of spray inclination on water spray cooling performance in non-boiling regime

Yaqing Wang et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)

添加到收藏夹

Article Thermodynamics

Experimental investigation of parameters effect on heat transfer of spray cooling

Wen-Long Cheng et al.

HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Analytical and computational methodology for modeling spray quenching of solid alloy cylinders

Nikhin Mascarenhas et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Spray Cooling Heat Flux Performance Using POCO HTC Foam

Eric A. Silk et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Experimental study of spray cooling performance on micro-porous coated surfaces

Yoon-ho Kim et al.

HEAT AND MASS TRANSFER (2009)

添加到收藏夹

Article Thermodynamics

Cooling Performance of a 16-Nozzle Array in Variable Gravity

Levi J. Elston et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2009)

添加到收藏夹

Article Thermodynamics

Effects of high subcooling on two-phase spray cooling and critical heat flux

Milan Visaria et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)

添加到收藏夹

Article Thermodynamics

Experimental study of non-boiling heat transfer from a horizontal surface by water sprays

Nitin Karwa et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2007)

添加到收藏夹

Article Engineering, Aerospace

Gravity Effect on Spray Impact and Spray Cooling

Tatiana Gambaryan-Roisman et al.

MICROGRAVITY SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Article Thermodynamics

Spray cooling heat transfer: The state of the art

Jurigho Kim

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2007)

添加到收藏夹

Article Thermodynamics

Local heat transfer coefficients in spray cooling systems measured with temperature oscillation IR thermography

S. Freund et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

添加到收藏夹

Article Thermodynamics

Next generation spray cooling: High heat flux management in compact spaces

Timothy A. Shedd

HEAT TRANSFER ENGINEERING (2007)

添加到收藏夹

Article Thermodynamics

Spray cooling of enhanced surfaces: Impact of structured surface geometry and spray axis inclination

Eric A. Silk et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

添加到收藏夹

Article Thermodynamics

Spray angle effect during spray cooling of microelectronics: Experimental measurements and comparison with inverse calculations

B. Q. Li et al.

APPLIED THERMAL ENGINEERING (2006)

添加到收藏夹

Article Dermatology

Thermal and flow measurements of continuous cryogenic spray cooling

SS Hsieh et al.

ARCHIVES OF DERMATOLOGICAL RESEARCH (2006)

添加到收藏夹

Article Thermodynamics

Single-phase and two-phase cooling characteristics of upward-facing and downward-facing sprays

JR Rybicki et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

添加到收藏夹

Article Thermodynamics

Single nozzle spray cooling heat transfer mechanisms

B Horacek et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)

添加到收藏夹

Article Thermodynamics

Spray cooling characteristics of water and R-134a. Part II: transient cooling

SS Hsieh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

添加到收藏夹

Article Thermodynamics

Thermal conductivity of suspensions of carbon nanotubes in water

MJ Assael et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2004)

添加到收藏夹

Article Thermodynamics

Optimal spray characteristics in water spray cooling

RH Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

添加到收藏夹

Article Thermodynamics

Heat transfer characteristics of spray cooling in a closed loop

LC Lin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)

添加到收藏夹

Article Thermodynamics

Experimental investigation of droplet dynamics and heat transfer in spray cooling

W Jia et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2003)

添加到收藏夹

Article Engineering, Biomedical

Effect of spurt duration on the heat transfer dynamics during cryogen spray cooling

G Aguilar et al.

PHYSICS IN MEDICINE AND BIOLOGY (2003)

添加到收藏夹

Article Thermodynamics

The effect of dissolving salts in water sprays used for quenching a hot surface: Part 1 - Boiling of single droplets

W Cui et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2003)

添加到收藏夹

Article Engineering, Biomedical

Effects of mass flow rate and droplet velocity on surface heat flux during cryogen spray cooling

E Karapetian et al.

PHYSICS IN MEDICINE AND BIOLOGY (2003)

添加到收藏夹

Article Dermatology

Dynamic behavior of cryogen spray cooling: Effects of spurt duration and spray distance

G Aguilar et al.

LASERS IN SURGERY AND MEDICINE (2003)

添加到收藏夹

Article Thermodynamics

Effects of spray characteristics on critical heat flux in subcooled water spray cooling

RH Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)

添加到收藏夹

Article Thermodynamics

Bubble behavior and nucleate boiling heat transfer in saturated FC-72 spray cooling

DP Rini et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2002)

添加到收藏夹

Article Dermatology

Cryogen spray cooling efficiency: Improvement of port wine stain laser therapy through muttiple-intermittent cryogen spurts and laser pulses

G Aguilar et al.

LASERS IN SURGERY AND MEDICINE (2002)

添加到收藏夹

Article Thermodynamics

The effect of dissolving gases or solids in water droplets boiling on a hot surface

Q Cui et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2001)

添加到收藏夹

Article Engineering, Manufacturing

Assessment of high-heat-flux thermal management schemes

I Mudawar

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2001)

添加到收藏夹

Article Thermodynamics

Spray cooling under reduced gravity condition

K Yoshida et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2001)

添加到收藏夹

Article Engineering, Electrical & Electronic

Modelling electronic circuit radiation cooling using analytical thermal model

M Janicki et al.

MICROELECTRONICS JOURNAL (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.