Improved the electrochemical performance between ZnO@Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte and lithium metal electrode for all-solid-state lithium-ion batteries

Spherical Li1.3Al0.3Ti1.7(PO4)3 (LATP) solid electrolyte powders are first successfully synthesized by spray-drying and O2 pressure-controlled calcination processes, and then the targeted ZnO@LATP composite solid electrolytes are gained by coating 2 mu m thickness of ZnO layer on the surface of the LATP powders, in which the ZnO layer effectively not only isolates the direct contact between LATP electrolyte sheet and lithium metal electrode, but also regulates the lithium deposition reaction on the surface of the electrolytes, thereby restraining the over-growth of lithium dendrites to prolong the life span of the assembled coin cell. Specifically, the Li/ZnO@-LATP@ZnO/Li symmetric cell enhances the cycle stability without obvious increment of the overpotential compared to the Li/LATP/Li cell at 0.4 mA cm-2 for 500 h, and the assembled LiCoO2/ZnO@LATP/Li coin cell can deliver excellent rate and cycling performance, in which the discharge specific capacity is still retained at 118.5 mAh g-1 after 100 cycles at 0.1 C and quickly recovers to 121.2 mAh g-1 when the current is set back to 0.1 C after cycles. Furthermore, the ZnO@LATP solid electrolyte powders after being cycled present integrally spherical shape without any remarkable crack compared with the LATP solid electrolyte powders. Therefore, the investigations may provide an effective strategy to significantly lower the probability of side reactions between LATP electrolyte and lithium metal electrode to promote the electrochemical properties of LATP-based all -solid-state lithium-ion batteries.

Automated summary

Spherical Li1.3Al0.3Ti1.7(PO4)3 (LATP) solid electrolyte powders were successfully synthesized by spray-drying and O2 pressure-controlled calcination processes. The targeted ZnO@LATP composite solid electrolytes were obtained by coating a 2 μm thickness of ZnO layer on the surface of LATP powders, effectively isolating direct contact between LATP electrolyte sheet and lithium metal electrode, and regulating lithium deposition reaction on the electrolyte surface to restrain lithium dendrite over-growth.